Fluke
Fluke® SureGrip™ AC220 Alligator Clip Set, 10 A, 9.5 mm Jaw Opening, Rubber, Nickel Plated
SureGripâ„¢ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement.
Fluke® SureGrip™ 80PK-27 Industrial Surface Temperature Probe, -127 to 600 deg C, 0.9 in Dia x 12-3/4 in L, 8 deg F, -196 to 32 deg F, 32 to 362 deg F, +/-1.2 % of 363 to 1112 deg F Accuracy, 12 in L Wire
The Fluke® 80PK-27 SureGrip™ industrial surface temperature probe is designed to be compatible with any temperature measuring instrument that accepts type-K thermocouples, has a miniature thermocouple connector and has cold reference junction compensation. The innovative SureGrip™ design makes It easier to hold the probe and focus on the measurement. Ideal for surfaces in rugged environments.
Fluke® ProcessMeter® FLUKE-787 Digital Multimeter, 1000 VDC/VAC, 1 A, 40 MOhm Measuring, 0 to 1000 VAC/VDC, 0 to 1 A, 40 MOhm, Backlit LCD Display
Fluke® 787 ProcessMeter®. Double your power. A maintenance and calibration tool that will be at home in every instrumentation technician's tool box, the Fluke® 787 ProcessMeter® combines a DMM and a Loop Calibrator in one rugged, handheld tool, for about what you would expect to pay for a loop calibrator alone. Based on the trusted Fluke® 87 DMM, the 787 adds the ability to measure, source, and simulate dc loop current with 0.05 accuracy and 1 microamp resolution.
Fluke® I1010 AC/DC Current Clamp, 600/1000 A/600 VAC, 10 kHz
Fluke current clamps extend the current ranges of Fluke tools. The Fluke i1010 AC/DC current clamp is highly reliable, measures 1A to 1000A and provides accurate current reading without breaking the circuit. This clamp measures both ac and dc current with a large jaw, battery-powered Hall-effect probe that gives access to difficult to reach areas. Compatible with most Fluke multimeters.
Fluke® H5 T5 Electrical Tester Holster With Lead Storage, Belt Loop, 192 mm L x 90 mm W x 38 mm D, Fabric
Fluke® H5 T5 Electrical Tester Holster With Lead Storage, Belt Loop, 192 mm L x 90 mm W x 38 mm D, Fabric
Fluke® FUSE-630MA/BLSTR Fast Acting Fuse, 630 mA, 250 V AC, Cartridge Body
Fluke® FUSE-630MA/BLSTR Fast Acting Fuse, 630 mA, 250 VAC, Cartridge Body
Fluke® FLUKE-87-5/E2-KIT 80 Series Industrial Multimeter Electronic Measuring Probe, 600/1000 V AC, 10 A, 0.7%, 0.05% Accuracy
This new combo kit is based on the Fluke® 87V and Includes special accessories to make industrial troubleshooting even more productive. Save over 15 compared with the individual purchase price of all the accessories.
Fluke® FLUKE-87-5 Industrial Digital Multimeter, 1000 V AC/DC, 10 A, 50 MOhm, Analog/Digital Display
When productivity is on the line and you need to solve problems fast, the Fluke® 87V delivers the accuracy and advanced troubleshooting capabilities you need. Designed specifically to handle complex signals, the 87V industrial multi-meter, allows you to gain productivity by taking the guesswork out of drive system troubleshooting even in loud, high energy and high altitude locations.
Fluke® Fluke-835 Class 2 Alignment Laser, 10 meter Measurement Range
The new Fluke® 83-5 has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution and electro mechanical equipment.
Fluke® FLUKE-77-4 Digital Multimeter, 1000 VDC/VAC, 10 A, 50 MOhm Measuring, 600 mV AC to 1000 V AC/6 to 1000 V DC, 60 mA to 10 A, 600 Ohm to 50 MOhm, Digital Display
Fluke® 77 IV digital multi-meter has the features needed to repair most electrical and electronic problems. This meter is simple to use and has significant improvements over Fluke®'s original 70 series with more measurement functions, conformance to the latest safety standards and a much larger display that's easier to view.
Fluke® FLUKE-62-MAX Mini Infrared Thermometer, 32 to 122 deg F, +/-1.5 deg C or +/-1.5% of Reading, Whichever is Greater, -10 to 0 deg C: +/-2.0, -30 to -10 deg C: +/-3.0 Accuracy, 10:1 Focus Spot, 0.1 to 1, AA Battery
The Fluke® 62 max infrared thermometer delivers many of the features of the Fluke® 62 max, but features a single laser and 10:1 distance to spot ratio. You can use the Fluke® 62 max to perform non-contact temperature measurements on transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves and vents. It is small in size and extremely easy to use. The single laser helps you pinpoint the target for more accurate readings and makes it easier to measure temperatures in hard to reach areas. With its IP54 rating for dust and water resistance you can rely the Fluke® 62 max to deliver accurate, repeatable temperature measurements, rain or shine, in even the dirtiest and dustiest industrial sites. And it's rugged enough to take a 3 m drop so no worries even if you work from a ladder.
Fluke® FLUKE-52-2-60HZ Digital Thermometer, 210 to 1200 deg C J-Type, 200 to 1372 deg C K-Type, 250 to 400 deg C T-Type, 150 to 1000 deg C E-Type, 200 to 1300 deg C N-Type, 0 to 1767 deg C R and S-Type
Laboratory accuracy. Wherever you go. The Fluke® 50 series II contact thermometers offer fast response and laboratory accuracy (0.05% + 0.3 deg C) in a rugged, handheld test tool. A dual input thermometer, 60 Hz noise rejection.
Fluke® FLUKE-376/FC Wireless Clamp Meter, 999.9 A, 60 kOhm, 10 to 100/100 to 500 Hz, 34 mm Jaw
The Fluke® 376 FC wireless True-RMS™ AC/DC clamp meter offers measurements up to 1000 VAC and 1000 A, AC or DC, plus an included iFlex" flexible current clamp.
Fluke® FLUKE-375/FC Wireless Clamp Meter, 600 A, 60 kOhm, 10 to 100/100 to 500 Hz, 34 mm Jaw
The Fluke® 375 FC is a high performance clamp meter with wireless communication, measures very low voltage and very high resistance, plus a VFD low pass filter for accurate motor drive measurements.
Fluke® FLUKE-374/FC Wireless Clamp Meter, 600 A, 6000 Ohm, 10 to 100/100 to 500 Hz, 34 mm Jaw
The Fluke® 374 FC offers advanced troubleshooting performance and is now part of the Fluke® Connect® family of wireless test tools.
Fluke® FLUKE-373 Clamp Meter, 600 A, 600 VAC/VDC, 6000 Ohm, Dual Backlit Display
The new Fluke® 373 clamp meter offers improved performance perfect for any AC only current measurement situations. Featuring True-RMS AC voltage and current measurements and resistance measurement up to 6000 Ohm with continuity detection, the Fluke® 373 is everything you need, plus a little more.
Fluke® FLUKE-324 True-RMS Clamp Meter, 600 VAC/VDC, 400 to 4000 Ohm, 45 to 400 Hz, Backlit Display
True-RMS measurements and optimized ergonomics make the 320 series clamp meters the best general troubleshooting tools for commercial and residential electricians. The 323, 324 and 325 are designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. These small and rugged clamp meters are ideally suited for current measurements up to 400 A in tight cable compartments. The Fluke® 324 model also includes temperature and capacitance measurement capabilities.
Fluke® FLUKE-323 Clamp Meter, 400 A, 600 VAC/VDC, 4000 Ohm, 30 mm Jaw, Backlit Display
True-RMS measurements and optimized ergonomics make the 320 series clamp meters the best general troubleshooting tools for commercial and residential electricians. The Fluke® 323 model is ideally suited for current measurements up to 400 A in tight cable compartments.
Fluke® FLUKE-1AC-A1-II AC Flat Tip Electrical Tester Voltage Detector, 90 to 1000 V AC, High Intensity Red LED Indicator, CAT IV 1000 V, Hard Plastic
The next generation VoltAlertâ„¢ AC non-contact voltage testers from Fluke are easy to use - just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know theres voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home..
Fluke® FLUKE-179-ESFP Digital Multimeter, 1000 VDC/VAC, 10 A, 50 MOhm Measuring, 1000 V AC/DC, 10 A, 50 MOhm, Digital Display
Fluke® 179 True-RMS digital multi-meter is the preferred solution for professional technicians around the world. With all the features you need to troubleshoot and repair in electrical and electronic systems, the Fluke® 179 also offers a digital display with analog bar graph and built-in temperature measurements. Works when you need it, where you need it. You can trust the Fluke® 179 to get the job done in all of the messy, loud, high energy and high places you work. Backed by a lifetime warranty the Fluke® 179 is independently tested for safe use in CAT IV 600 V/CAT III 1000 V environments. The Fluke® 179 just one of Fluke® trusted tools.
Fluke® FLUKE-177-ESFP Digital Multimeter, 1000 VDC/VAC, 10 A, 50 MOhm Measuring, 1000 V AC/DC, 10 A, 50 MOhm, Digital Display
Fluke® 177 digital multi-meter is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600 V/CAT III 1000 V environments, the Fluke® 177 is the industry standard with all the features you need to troubleshoot and repair many problems in electrical and electronic systems. The Fluke® 177 digital multi-meter gives you True-RMS™ voltage and current measurements, 6000 count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke® 177 provides higher 0.09 basic accuracy, a digital display with analog bar graph and backlight.
Fluke® FLUKE-175-ESFP Digital Multimeter, 1000 VDC/VAC, 10 A, 50 MOhm Measuring, 1000 V AC/DC, 10 A, 50 MOhm, Digital Display
Fluke® 170 series True-RMS™ digital multi-meters is preferred solution for the precise, reliable and easy of use . This is the industry standard, with all the features you need to troubleshoot and repair so many problems in electrical and electronic systems. Fluke® 170 series digital multi-meters give you True-RMS™ voltage and current measurements, 6000 count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke® 177 and 179 provide higher 0.09 basic accuracy, a digital display with analog bar graph and backlight. And the Fluke® 179 delivers temperature measurements.
Fluke® FLUKE-115 Digital Multimeter, 600 VDC/VAC, 10 A, 40 MOhm Measuring, 600 V AC/DC, 10 A, 0.1 Ohm to 40 MOhm, Digital Display
Fluke® 115 True-RMS digital multi-meter provides the perfect answer. Its simple operation, compact design and ease of use makes it perfect for quick verifications and field service use. The Fluke® 115 displays True-RMS voltage and current readings with 6000 count resolution, tests diodes, frequency, continuity and capacitance and provides min max average readings to record signal fluctuations. A large white LED backlight aids work in poorly lit areas. Its easy open Battery access door makes Battery changes a snap. Fluke® 115 multimeters are independently tested for safe use in CAT III 600 V environments. And check out other members of the Fluke® 110 family, the Fluke® 113 utility multi-meter, the Fluke® 114 electrical multi-meter, the Fluke® 116 HVAC multi-meter and the Fluke® 117 commercial electrician's multi-meter. Also check out the Fluke® 114 electrical multi-meter, the Fluke® 116 HVAC multi-meter with temperature and microamps and the Fluke® 117, the electrician's multi-meter with non-contact voltage.
Fluke® FLUKE-114 Compact Digital Multimeter, 600 VDC/VAC, 40 MOhm Measuring, 6/60/600 V AC/DC, 0.1 Ohm to 40 MOhm, Digital Display
Fluke® 114 True-RMS digital multi-meter is the perfect troubleshooting tool for go/no go testing. Its AutoVolt capability automatically switches to measure AC or DC voltage, whichever is present. The LoZ function helps identify so called ghost voltage and prevent false readings. The Fluke® 114 displays True-RMS voltage and current readings with 6000 count resolution and tests frequency, continuity and resistance. A large white LED backlight aids work in poorly lit areas. Its easy open Battery access door makes Battery changes easy. Fluke® 114 multimeters are independently tested for safe use in CAT III 600 V environments. And check out other members of the Fluke® 110 family, the Fluke® 113 utility multi-meter, the Fluke® 115 field service multi-meter, the Fluke® 116 HVAC multi-meter and the Fluke® 117 commercial electrician's multi-meter.
Recently Viewed
GP® 4022MD Deep Length Socket, 1 in, 22 mm Hex Socket, 6 Points
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
PIXB122K>
2-1/2" 90 DEGREE BUTT WELD ELBOW-FIT21/2BWE >
PALLET RACK UPRIGHT FOOTPLATES-MECT0052501 >
4-3/4" -IDX4-15/16" -OD O-RINGS
2-15/16" -ID 2-BOLT FLANGE UNIT-BRWVF2S247 >
