Fluke® FLUKE-373 Clamp Meter, 600 A, 600 VAC/VDC, 6000 Ohm, Dual Backlit Display
The new Fluke® 373 clamp meter offers improved performance perfect for any AC only current measurement situations. Featuring True-RMS AC voltage and current measurements and resistance measurement up to 6000 Ohm with continuity detection, the Fluke® 373 is everything you need, plus a little more.
-
BrandFluke®
-
UPC095969557832
-
Manufacturer Part NumberFLUKE-373
-
CountryUSA
-
MaterialHard Plastic
-
Resistance6000 Ohm
-
AC Current Accuracy2% +/-5 Digits at 600 A
-
Voltage Accuracy1% +/-5 at 600 VAC, 1% +/- 5 at 600 VDC
-
Safety RatingCAT III 600 VAC, CAT IV 300 VAC
-
Dimensions9.13 in L x 3.35 in W x 1.77 in H
-
Display TypeDual Backlit
-
Operating Temperature-10 to 50 deg C
-
Electrical Ratings600 A, 600 VAC/VDC
- True-RMS AC voltage and current for accurate measurements on non-linear signals, hard plastic enclosure type
- State-of the art signal processing allows for use in noisy electrical environments while providing stable readings
- Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
- With True-RMS AC voltage and current measurements, the Fluke® 373 clamp meter reads up to 600 A AC and 600 VAC/VDC
- 2 deg pollution
- 6000 Ohm at 1% +/-5 digits accuracy
- <=30 Ohm continuity, 10 uF to 1000 uF capacitance
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 6FXH7 |
| Grainger | 6FXH7 |
-
Alternative Part Number3780249
-
UNSPSC41113637
-
IncludesSoft Carrying Case
-
Standards/ApprovalsANSI/ISA S82.02.01:2004|CAN/CSA C22.2 No. 61010-1-04|CSA C22.2 No 61010-1-04|ECCN 3A992|EN/IEC 61010-031-2002/A1-2008|EN/IEC 61010-2-32:2002|IEC/EN 61010-1-2001
-
Owners/User Manual
Recently Viewed
Fluke® FLUKE-373 Clamp Meter, 600 A, 600 VAC/VDC, 6000 Ohm, Dual Backlit Display
The new Fluke® 373 clamp meter offers improved performance perfect for any AC only current measurement situations. Featuring True-RMS AC voltage and current measurements and resistance measurement up to 6000 Ohm with continuity detection, the Fluke® 373 is everything you need, plus a little more.
Klein® 56333 Durable Slip-Resistant Fish Tape, 0.125 in W x 0.062 in THK Tape, 120 ft L Tape, Double Loop Profile, Steel Tape, Black/Orange
The Klein Tools 120 ft, high carbon steel fish tape is perfect for wire runs associated with commercial, residential and voice data video installations. The optimized housing and handle design decreases payout effort and reduces binding. A multiple position handle allows for a firm, steady grip as you pull or rewind the tape. The unique interior case shape combines the leverage of square cases and the comfort of round cases, which makes rewinding tape after a long run easier. The tape features laser etched descending markings placed at every foot. These markings allow you to accurately measure the depth of conduit runs and determine the amount of tape left to pay out.
Reed 05628 R12+ Drophead, For Use With: HSS Segmental Die, 3/4 in NPT
R12+ Dropheads ship completely assembled and ready to use with HSS segmental dies already in place. R12+ Dropheads can be used manually with the ratchet ring and handle or with REED's 700PD, 700APD and 701PD Power Drives. R12+ dropheads are interchangeable with RIDGID® 12-R dropheads and can also be utilized in the RIDGID® 700 power drive.
PTI 10B-31B Single Strand Hub Type B Roller Chain Sprocket, 20 mm Dia Bore, 163.9 mm OD, #10B-1 Chain, 31 Teeth, 15.875 mm Pitch, C45 Steel
Hub type metric sprockets are available with a minimum plain bore (pilot bore) and some stock finished bore sizes. Any shaft size is possible with our custom bore and keyway capability. Sprockets with hubs are typically fitted to the shaft as a clearance fit. They are held in place with two set screws and a keyway. Clearance fits are popular for light loads and slow speeds. A press fit (or shrink fit to the shaft) is usually preferred for higher speeds or heavier loads as they fit to the shaft more securely than a clearance fit sprocket. Depending on the clearance of the shaft fit, sprockets may work slightly on the shaft causing possible fretting or shaft wear. All sprockets are available with hardened teeth from stock or on request. Press fits usually require the sprocket to be heated for installation to expand the bore. As a heated sprocket cools, it shrinks, conforming to the shaft with a tight grip. A set screw can be used to secure the key. The TL taper bushed sprocket will function like the press fit sprocket and is generally easier to install.
AUTO CORDLESS BATTERY CHARGERS-MWK48590186 >
RECHARGEABLE WORKLIGHT/FLASHLIGHT-NEB6434>
