Pillow Block Ball Bearing Units
LRCSM-1.3/16 Ball Bearing Cartridge-faflrcsm1.
BALL BEARING CARTRIDGE-FAFLRCSM1.3/16>
MUA 2-7/16 Wide Inner Ring Insert Bearing
Wide Inner Ring Insert Bearing
P-2-BSCMED-203 Dodge® 076133 212 Extreme Medium Duty Pillow Block Ball Bearing Unit, 2-3/16 in Dia Bore, 6.88 to 7.94 in L Bolt Center-to-Center, 2-3/4 in Base to Bore Centerline, 9-1/2 in OAL x 5.4 in OAH
The Dodge® SC/SCMED extreme duty ball bearing offers extended life in the toughest industrial applications. Incorporating patented Dodge®-only features such as the QuadGuard™ sealing system and the Maxlife™ ball cage, the Dodge® SCED/SCMED bearing outperforms the competition in demanding environments where increasing equipment uptime is critical to success. Extreme conditions require highly-engineered products that will last. The Dodge® extreme duty ball bearing is up to the challenge.
P-2-BSXV-107 Dodge® 131981 207 Intermediate Duty Pillow Block Ball Bearing Unit, 1-7/16 in Dia Bore, 4.68 to 5.44 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 6-1/2 in OAL x 3-3/4 in OAH
Dodge® 131981 207 Intermediate Duty Pillow Block Ball Bearing Unit, 1-7/16 in Dia Bore, 4.68 to 5.44 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 6-1/2 in OAL x 3-3/4 in OAH
P-2-BSXVB-108 Dodge® 131995 208 Intermediate Duty Pillow Block Ball Bearing Unit, 1-1/2 in Dia Bore, 5.18 to 5.88 in L Bolt Center-to-Center, 1.94 in Base to Bore Centerline, 7-1/4 in OAL x 4 in OAH
Dodge® 131995 208 Intermediate Duty Pillow Block Ball Bearing Unit, 1-1/2 in Dia Bore, 5.18 to 5.88 in L Bolt Center-to-Center, 1.94 in Base to Bore Centerline, 7-1/4 in OAL x 4 in OAH
RABR-B-5/8-47 INA BEARINGspecialized radial insert ball bearing with an integrated rubber interline
• Bore Diameter (d): 15 mm (approx. 0.5906 in / often used interchangeably in 5/8" or 15mm applications)
• Outside Diameter (D): 47.3 mm (1.8622 in) including the rubber sleeve
• Total Width (B2): 31.1 mm (1.2244 in)
• Locking Device: Eccentric locking collar
• Sealing: Lip/Contact "P" seals on both sides
• Rubber Hardness: 70° Shore A
RCRA-3/4 INA BEARING specialized radial insert ball bearing with a rubber interliner/boot
3/4"-ID BEARING-INARCRA3/4>
RCSM-B-3/4/65 INA BEARING a specialized, noise-tested radial insert ball bearing with a rubber interliner COMPANY
• Shaft Diameter (d): 3/4 inch (19.05 mm)
• Outside Diameter (D): 65.1 mm (approx. 2.563 inches) including the rubber interliner
• Total Assembly Width (B1): 36.2 mm (approx. 1.425 inches)
• Locking Device: Eccentric self-locking collar
• Sealing: Double-lip P contact seals on both sides to trap grease and repel airborne grit
RRCSM-3/4 3/4"-ID Hvac Cartridge
3/4"-ID HVAC CARTRIDGE BEARINGS-FAFRCSM3/4>
Sealmaster 1-1/2" 2-B HIGH BB PILLOW BLOCKS SEA NP-24
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 1-1/2" 2-B LOW BB PILLOW BLOCKS SEA NPL-24-TC
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 1-1/2"-ID EXPANSION PILLOW BLOCKS SEA EMP-24
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 1-1/2"-ID M/D 300 BB PILLOW BLOCKS SEA MP-24
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 1-1/2"-ID PILLOW BLOCK UNITS SEA SP-24
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 1-1/2"-ID PILLOW BLOCK UNITS SEA SP-24-T
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 1-1/2"-ID SKWEZ PILLOW BLOCK UNITS SEA NP-24-T
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 1-1/4" 2-B HIGH BB PILLOW BLOCKS SEA NP-20-R
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 1-1/4" 2-B LOW BB PILLOW BLOCKS SEA NPL-20
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 1-1/4" 2-B LOW BB PILLOW BLOCKS SEA NPL-20-TC
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 1-1/4" RUBBER MOUNTED PILLOW BLOCK SEA SRP-20-R
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 1-1/4"-ID "300" PILLOW BLOCK UNITS SEA MP-20
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 1-1/8" 2-B HIGH BB PILLOW BLOCKS SEA NP-18
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 1-1/8" 2-B LOW BB PILLOW BLOCKS SEA NPL-18
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 1-1/8"-ID TAPPED-BASE PILLOW BLOCK SEA TB-18
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Recently Viewed
Morse® AV42 Master Cobalt® Heavy Duty Hole Saw, 2-5/8 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
Square Dâ„¢ QOB125 Standard Miniature Circuit Breaker, 120/240 V AC, 25 A, 10 kA Interrupt, 1 Poles, Thermal Magnetic Trip
QO and QOB one, two and three pole thermal magnetic circuit breakers provide overcurrent protection and switching on ac and dc systems. These circuit breakers have an over center, trip free toggle mechanism with quick make, quick break action and positive handle indication. They also have VisiTrip trip indication, which provides a visual indication that the circuit breaker has tripped and interrupted the circuit. A full line of features and factory installed accessories are also available such as shunt trips, auxiliary switches and alarm switches. This 1 pole QO circuit breaker is rated at 25A at 120/240VAC. This unit provides 10kA breaking capacity and bolt on mounting. QO circuit breakers are UL Listed under UL File E84967 and are CSA Certified under CSA Master Contract 153555.
Permatex® 81878 101 High Temperature RTV Gasket, 3 oz Container Tube Container
Permatex® Ultra Copper® is a single component, room temperature vulcanizing gasketing compound designed to provide reliable formed-in-place gaskets for mechanical assemblies. This material cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. The product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Permatex® Ultra Copper® is the most advanced high performance, high temperature (up to 700 deg F intermittent) RTV gasket available.
Morse® Real McCoy® TA38 Hole Saw, 2-3/8 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
DRILL PUMP KIT, KIT INCLUDES PLASTIC TUBING, DISCHARGE HOSE, AND PUMP. A GARDEN HOSE CAN BE USED.-JWH322387 >
Crescent® CAVBX2D20 Bolt Biter™ Impact Nut Extractor, 5/16 in Extractor, 1/4 in Drill, For Screw Size: 5/16 in, 3.5 in OAL, 1/4 in Shank
The Crescent APEX line of power tool accessories enhances durability, extends life and improves tool fit, while also making tools easier to identify on the jobsite. Pulling from 85+ years in assembly manufacturing, Crescent APEX is committed to providing high quality solutions with durable dependability.
