P-2-BSXV-107 Dodge® 131981 207 Intermediate Duty Pillow Block Ball Bearing Unit, 1-7/16 in Dia Bore, 4.68 to 5.44 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 6-1/2 in OAL x 3-3/4 in OAH
Dodge® 131981 207 Intermediate Duty Pillow Block Ball Bearing Unit, 1-7/16 in Dia Bore, 4.68 to 5.44 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 6-1/2 in OAL x 3-3/4 in OAH
-
BrandDodge®
-
UPC782475119707
-
Manufacturer Part Number131981
-
CountryUSA
-
Load Capacity5759 lb Dynamic/3461 lb Static
-
Locking DeviceEccentric Collar
-
FinishPowder Coated
-
MaterialSteel
-
Maximum Speed5500 rpm
-
TypeIntermediate Duty
-
Mounting TypeTwo-Bolt Base
-
Seal TypeSingle Lip
-
Series207
-
Base Width1-3/4 in
-
Base to Bore Centerline1.88 in
-
Bolt Center-to-Center Length4.68 to 5.44 in
-
Bore Diameter1-7/16 in
-
Bore TypeRound
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height3-3/4 in
-
Overall Length6-1/2 in
-
Overall Width1.53 in
- Narrow inner ring design
- Fiberglass reinforced nylon cage
- Grade 10 balls for quiet operation
- Proguard™ single lip seal
- No groove in housing for end cover
| Competitor Name | Cross-Reference Number |
|---|---|
| Applied Industrial Technologies | 100940108 |
-
Alternative Part NumberP2B-SXV-107
-
UNSPSC31171504
-
Package DescriptionEACH
-
Catalog
-
Full Engineering Drawing
-
Specification Sheet
Recently Viewed
P-2-BSXV-107 Dodge® 131981 207 Intermediate Duty Pillow Block Ball Bearing Unit, 1-7/16 in Dia Bore, 4.68 to 5.44 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 6-1/2 in OAL x 3-3/4 in OAH
Dodge® 131981 207 Intermediate Duty Pillow Block Ball Bearing Unit, 1-7/16 in Dia Bore, 4.68 to 5.44 in L Bolt Center-to-Center, 1.88 in Base to Bore Centerline, 6-1/2 in OAL x 3-3/4 in OAH
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Gates® Power Transmission Hi-Power® II B67 Banded Classical Heavy Duty V-Belt, B Section, 21/32 in W Top, 70 in L Outside, 13/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Browning® 767322 VPLE 100 Intermediate Duty Low Base Pillow Block Ball Bearing Unit, 1-15/16 in Dia Bore, 5-23/32 to 6-21/32 in L Bolt Center-to-Center, 2-3/16 in Base to Bore Centerline, 8 in OAL x 4-1/2 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Browning® 767813 VTBS 200 Normal Duty Pillow Block Ball Bearing Unit, 1-1/8 in Dia Bore, 3 in L Bolt Center-to-Center, 1-11/16 in Base to Bore Centerline, 4 in OAL x 3-3/8 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
