Pillow Block Ball Bearing Units
XLS-3-1/4-M DEEP GROOVE BALL BEARING
XLS Series Single Row Angular Contact Ball Bearings
XLS-1-3/4 XLS Series Single Row Angular Contact Ball Bearings
XLS Series Single Row Angular Contact Ball Bearings
W-7/8 INA BEARING single-direction thrust ball bearing
• Bore Diameter (d): 7/8 inch (0.875 in / 22.225 mm)
• Outside Diameter (D): 1-21/32 inches (1.656 in / 42.06 mm)
• Height / Width (T): 5/8 inch (0.625 in / 15.875 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)
• Load Capacities: 4,220 lbf basic dynamic axial load and 7,860 lbf static axial load
W-5/8 INA BEARING single-direction axial deep groove ball thrust bearing.
• Bore Diameter (d): 5/8 inch (15.875 mm)
• Outside Diameter (D): 1.406 inches (35.71 mm)
• Height / Width (T): 0.625 inches (15.875 mm)
• Race Type: Grooved
• Component Design: Separable (Shaft ring, housing ring, ball/cage assembly)
• Load Capacities: 4,340 lbf (19,300 N) Axial Dynamic / 6,400 lbf (28,500 N) Axial Static
• Limiting Speed: 8,600 RPM
• Weight: 0.172 lbs (0.078 kg)
W-5/16 INA BEARING single-direction axial deep groove ball thrust bearing
• Bore Diameter (d): 5/16 inch (7.938 mm)
• Outside Diameter (D): 1.000 inch (25.40 mm)
• Height / Width (T): 0.531 inches (13.49 mm)
• Raceway Configuration: Grooved races on both washers
• Load Capacities: 1,910 lbf (8,500 N) Dynamic / 2,510 lbf (11,200 N) Static
• Limiting Speed: 12,800 RPM
W-3/8 INA BEARING single-direction axial deep groove ball thrust bearin
• Bore Diameter (d): 3/8 inch (9.525 mm)
• Outside Diameter (D): 1.000 inch (25.40 mm)
• Height / Width (T): 0.531 inches (13.49 mm)
• Raceway Style: Grooved races for guided ball movement
• Load Capacities: 1,910 lbf Dynamic / 2,510 lbf Static
• Limiting Speed: 12,800 RPM
W-3/4 INA BEARING single-direction axial deep groove ball thrust bearing
• Bore Diameter (d): 3/4 inch (19.05 mm)
• Outside Diameter (D): 1.531 inches (38.89 mm)
• Height / Width (T): 0.625 inches (15.875 mm or 5/8")
• Raceway Style: Grooved races for precision ball tracking
• Load Capacities: 3,930 lbf (17,500 N) Axial Dynamic / 6,740 lbf (30,000 N) Axial Static
• Limiting Speed: 9,500 RPM
W-1/4 INA BEARING compact, single-direction axial deep groove ball thrust bearing
• Bore Diameter (d): 1/4 inch (6.35 mm)
• Outside Diameter (D): 13/16 inch / 0.8125 inches (20.64 mm)
• Height / Width (T): 3/8 inch / 0.375 inches (9.525 mm)
• Raceway Style: Grooved races on both washers for precise ball guidance
• Load Capacities: 1,053 lbf Dynamic Axial / 1,170 lbf Static Axial
• Limiting Speed: 12,000 RPM (Grease) / 15,000 RPM (Oil)
W-1/2 1/2"-ID Thrust Ball Bearing
1/2"-ID THRUST BALL BEARING - INAW1/2>
W-1-7/8 1-7/8"-ID is a single-direction thrust ball bearing
• Bore Diameter (d): 1-7/8 inches (1.875 in / 47.63 mm)
• Outside Diameter (D): 2-13/16 inches (2.8125 in / 71.44 mm)
• Height / Width (T): 3/4 inch (0.750 in / 19.05 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)
W-1-5/8 1-5/8"-ID THRUST BALL BEARINGS
1-5/8"-ID THRUST BALL BEARINGS
W-1-3/4 INA BEARING single-direction thrust ball bearing
• Bore Diameter (d): 1-3/4 inches (1.750 in / 44.45 mm)
• Outside Diameter (D): 2-11/16 inches (2.6875 in / 68.26 mm)
• Height / Width (B or T): 3/4 inch (0.750 in / 19.05 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)
W-1-1/4 INA BEARINGsingle-direction thrust ball bearing
• Bore Diameter (d): 1-1/4 inches (1.250 in / 31.75 mm)
• Outside Diameter (D): 2-1/16 inches (2.0625 in / 52.39 mm)
• Height / Width (T): 5/8 inch (0.625 in / 15.88 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)
W-1-1/2 INA BEARINGsingle-direction thrust ball bearing
• Bore Diameter (d): 1-1/2 inches (1.500 in / 38.10 mm)
• Outside Diameter (D): 2-3/8 inches (2.375 in / 60.33 mm)
• Height / Width (T): 3/4 inch (0.750 in / 19.05 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)
Sealmaster 7/8"-ID 2-B HIGH BB PILLOW BLOCKS SEA NP-14
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 50-MM-ID 2-B LOW BB PILLOW BLOCKS SEA NPL-210-C
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 50-MM-ID 2-B HIGH BB PILLOW BLOCKS SEA NP-210
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 5/8"-ID 2-B HIGH BB PILLOW BLOCKS SEA NP-10
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 3/4"-ID TAPPED-BASE PILLOW BLOCKS SEA TB-12
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 3/4"-ID 2-B LOW BB PILLOW BLOCKS SEA NPL-12
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 3/4"-ID 2-B HIGH BB PILLOW BLOCKS SEA NP-12-TC
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 3/4"-ID 2-B HIGH BB PILLOW BLOCKS SEA NP-12
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 3/4" RUBBER MOUNTED PILLOW BLOCKS SEA SRP-12
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Recently Viewed
ARC ABRASIVE ROLLS ARE SPECIFICALLY ENGINEERED FOR APPLICATIONS SUCH AS: LIGHT DEBURRING, CLEANING, FINISHING, SURFACE PREP, POLISHING AND SCOURINT. PERFECT FOR USE ON MILD STEEL AND ALUMINUM
-ARC73174 >
38708 a heavy-duty industrial import oil seal distributed through commercial supply networks l
Radial/Deep Groove Ball Bearing features 0.7500 in bore diameter, straight bore, open closure, 1.5625 in outside diameter, and 0.4680 in width
8-RIB POLY-V V-BELTS-PIX550K8>
30" MEDIUM GRAY ADJUSTABLE LEG
MOTOR BRAKE KIT FOR 1800RPM OR SLOWER-BRWSSBK3230D >
Loctite® 466864 LB 8060™ Anti-Seize Stick, 20 g, Semi-Solid, Silver, 1.1000000000000001
