W-1-1/2 INA BEARINGsingle-direction thrust ball bearing
• Bore Diameter (d): 1-1/2 inches (1.500 in / 38.10 mm)
• Outside Diameter (D): 2-3/8 inches (2.375 in / 60.33 mm)
• Height / Width (T): 3/4 inch (0.750 in / 19.05 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)
Recently Viewed
W-1-1/2 INA BEARINGsingle-direction thrust ball bearing
• Bore Diameter (d): 1-1/2 inches (1.500 in / 38.10 mm)
• Outside Diameter (D): 2-3/8 inches (2.375 in / 60.33 mm)
• Height / Width (T): 3/4 inch (0.750 in / 19.05 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)
RECOMMENDED USE: For use on Paint (Body filler, paint, primers), Metal (Ferrous metals), Aluminum (Non-ferrous metals) and Wood (Plastics, wood and fiberglass) FEATURES: Aluminum oxide grain provides a fast cut with long life, stearate coating and semi open coat structure prevents loading. 80-150 Grit: "D" - heavy-weight, low flexibility paper backing. 180-400 Grit: "C" - medium-weight, low flexibility paper backing. For automotive body work, removing varnish from wood, sanding fiberglass, and for use on metal. For use on random orbital or low speed DA sanders - For dry use only. Available in PSA Disc Rolls. COMPATIBILITY: Disc Sander SPECIFICATIONS: 6" diameter, 400 grit
Browning® 767447 VPLS 200 Normal Duty Pillow Block Ball Bearing, 1-3/16 in Dia Bore, 4-5/32 to 5-3/32 in L Bolt Center-to-Center, 1-9/16 in Base to Bore Centerline, 6-3/16 in OAL x 3-5/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Browning® 767294 VPLE 100 Intermediate Duty Pillow Block Ball Bearing, 5/8 in Dia Bore, 3-3/16 to 4-1/16 in L Bolt Center-to-Center, 1-1/16 in Base to Bore Centerline, 4-7/8 in OAL x 2-3/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
W-5/8 INA BEARING single-direction axial deep groove ball thrust bearing.
• Bore Diameter (d): 5/8 inch (15.875 mm)
• Outside Diameter (D): 1.406 inches (35.71 mm)
• Height / Width (T): 0.625 inches (15.875 mm)
• Race Type: Grooved
• Component Design: Separable (Shaft ring, housing ring, ball/cage assembly)
• Load Capacities: 4,340 lbf (19,300 N) Axial Dynamic / 6,400 lbf (28,500 N) Axial Static
• Limiting Speed: 8,600 RPM
• Weight: 0.172 lbs (0.078 kg)
Browning® 767476 VPLS 200 Normal Duty Pillow Block Ball Bearing, 1-7/16 in Dia Bore, 4-9/16 to 5-7/16 in L Bolt Center-to-Center, 1-13/16 in Base to Bore Centerline, 6-3/4 in OAL x 3-5/8 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
