Pillow Block Ball Bearing Units

Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.

Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.

Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.

Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.

Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.

Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.

• Bore Diameter (d): 1-1/2 inches (1.500 in / 38.10 mm)
• Outside Diameter (D): 2-3/8 inches (2.375 in / 60.33 mm)
• Height / Width (T): 3/4 inch (0.750 in / 19.05 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)

• Bore Diameter (d): 1-1/4 inches (1.250 in / 31.75 mm)
• Outside Diameter (D): 2-1/16 inches (2.0625 in / 52.39 mm)
• Height / Width (T): 5/8 inch (0.625 in / 15.88 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)

• Bore Diameter (d): 1-3/4 inches (1.750 in / 44.45 mm)
• Outside Diameter (D): 2-11/16 inches (2.6875 in / 68.26 mm)
• Height / Width (B or T): 3/4 inch (0.750 in / 19.05 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)

1-5/8"-ID THRUST BALL BEARINGS

• Bore Diameter (d): 1-7/8 inches (1.875 in / 47.63 mm)
• Outside Diameter (D): 2-13/16 inches (2.8125 in / 71.44 mm)
• Height / Width (T): 3/4 inch (0.750 in / 19.05 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)

1/2"-ID THRUST BALL BEARING - INAW1/2>

• Bore Diameter (d): 1/4 inch (6.35 mm)
• Outside Diameter (D): 13/16 inch / 0.8125 inches (20.64 mm)
• Height / Width (T): 3/8 inch / 0.375 inches (9.525 mm)
• Raceway Style: Grooved races on both washers for precise ball guidance
• Load Capacities: 1,053 lbf Dynamic Axial / 1,170 lbf Static Axial
• Limiting Speed: 12,000 RPM (Grease) / 15,000 RPM (Oil)

• Bore Diameter (d): 3/4 inch (19.05 mm)
• Outside Diameter (D): 1.531 inches (38.89 mm)
• Height / Width (T): 0.625 inches (15.875 mm or 5/8")
• Raceway Style: Grooved races for precision ball tracking
• Load Capacities: 3,930 lbf (17,500 N) Axial Dynamic / 6,740 lbf (30,000 N) Axial Static
• Limiting Speed: 9,500 RPM

• Bore Diameter (d): 3/8 inch (9.525 mm)
• Outside Diameter (D): 1.000 inch (25.40 mm)
• Height / Width (T): 0.531 inches (13.49 mm)
• Raceway Style: Grooved races for guided ball movement
• Load Capacities: 1,910 lbf Dynamic / 2,510 lbf Static
• Limiting Speed: 12,800 RPM

• Bore Diameter (d): 5/16 inch (7.938 mm)
• Outside Diameter (D): 1.000 inch (25.40 mm)
• Height / Width (T): 0.531 inches (13.49 mm)
• Raceway Configuration: Grooved races on both washers
• Load Capacities: 1,910 lbf (8,500 N) Dynamic / 2,510 lbf (11,200 N) Static
• Limiting Speed: 12,800 RPM

• Bore Diameter (d): 5/8 inch (15.875 mm)
• Outside Diameter (D): 1.406 inches (35.71 mm)
• Height / Width (T): 0.625 inches (15.875 mm)
• Race Type: Grooved
• Component Design: Separable (Shaft ring, housing ring, ball/cage assembly)
• Load Capacities: 4,340 lbf (19,300 N) Axial Dynamic / 6,400 lbf (28,500 N) Axial Static
• Limiting Speed: 8,600 RPM
• Weight: 0.172 lbs (0.078 kg)

• Bore Diameter (d): 7/8 inch (0.875 in / 22.225 mm)
• Outside Diameter (D): 1-21/32 inches (1.656 in / 42.06 mm)
• Height / Width (T): 5/8 inch (0.625 in / 15.875 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)
• Load Capacities: 4,220 lbf basic dynamic axial load and 7,860 lbf static axial load

XLS Series Single Row Angular Contact Ball Bearings

XLS Series Single Row Angular Contact Ball Bearings

4-3/4"-ID BALL BEARINGS