Pillow Block Ball Bearing Units
Sealmaster 3/4"-ID 2-B LOW BB PILLOW BLOCKS SEA NPL-12
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 3/4"-ID TAPPED-BASE PILLOW BLOCKS SEA TB-12
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 5/8"-ID 2-B HIGH BB PILLOW BLOCKS SEA NP-10
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 50-MM-ID 2-B HIGH BB PILLOW BLOCKS SEA NP-210
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 50-MM-ID 2-B LOW BB PILLOW BLOCKS SEA NPL-210-C
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster 7/8"-ID 2-B HIGH BB PILLOW BLOCKS SEA NP-14
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
W-1-1/2 INA BEARINGsingle-direction thrust ball bearing
• Bore Diameter (d): 1-1/2 inches (1.500 in / 38.10 mm)
• Outside Diameter (D): 2-3/8 inches (2.375 in / 60.33 mm)
• Height / Width (T): 3/4 inch (0.750 in / 19.05 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)
W-1-1/4 INA BEARINGsingle-direction thrust ball bearing
• Bore Diameter (d): 1-1/4 inches (1.250 in / 31.75 mm)
• Outside Diameter (D): 2-1/16 inches (2.0625 in / 52.39 mm)
• Height / Width (T): 5/8 inch (0.625 in / 15.88 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)
W-1-3/4 INA BEARING single-direction thrust ball bearing
• Bore Diameter (d): 1-3/4 inches (1.750 in / 44.45 mm)
• Outside Diameter (D): 2-11/16 inches (2.6875 in / 68.26 mm)
• Height / Width (B or T): 3/4 inch (0.750 in / 19.05 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)
W-1-5/8 1-5/8"-ID THRUST BALL BEARINGS
1-5/8"-ID THRUST BALL BEARINGS
W-1-7/8 1-7/8"-ID is a single-direction thrust ball bearing
• Bore Diameter (d): 1-7/8 inches (1.875 in / 47.63 mm)
• Outside Diameter (D): 2-13/16 inches (2.8125 in / 71.44 mm)
• Height / Width (T): 3/4 inch (0.750 in / 19.05 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)
W-1/2 1/2"-ID Thrust Ball Bearing
1/2"-ID THRUST BALL BEARING - INAW1/2>
W-1/4 INA BEARING compact, single-direction axial deep groove ball thrust bearing
• Bore Diameter (d): 1/4 inch (6.35 mm)
• Outside Diameter (D): 13/16 inch / 0.8125 inches (20.64 mm)
• Height / Width (T): 3/8 inch / 0.375 inches (9.525 mm)
• Raceway Style: Grooved races on both washers for precise ball guidance
• Load Capacities: 1,053 lbf Dynamic Axial / 1,170 lbf Static Axial
• Limiting Speed: 12,000 RPM (Grease) / 15,000 RPM (Oil)
W-3/4 INA BEARING single-direction axial deep groove ball thrust bearing
• Bore Diameter (d): 3/4 inch (19.05 mm)
• Outside Diameter (D): 1.531 inches (38.89 mm)
• Height / Width (T): 0.625 inches (15.875 mm or 5/8")
• Raceway Style: Grooved races for precision ball tracking
• Load Capacities: 3,930 lbf (17,500 N) Axial Dynamic / 6,740 lbf (30,000 N) Axial Static
• Limiting Speed: 9,500 RPM
W-3/8 INA BEARING single-direction axial deep groove ball thrust bearin
• Bore Diameter (d): 3/8 inch (9.525 mm)
• Outside Diameter (D): 1.000 inch (25.40 mm)
• Height / Width (T): 0.531 inches (13.49 mm)
• Raceway Style: Grooved races for guided ball movement
• Load Capacities: 1,910 lbf Dynamic / 2,510 lbf Static
• Limiting Speed: 12,800 RPM
W-5/16 INA BEARING single-direction axial deep groove ball thrust bearing
• Bore Diameter (d): 5/16 inch (7.938 mm)
• Outside Diameter (D): 1.000 inch (25.40 mm)
• Height / Width (T): 0.531 inches (13.49 mm)
• Raceway Configuration: Grooved races on both washers
• Load Capacities: 1,910 lbf (8,500 N) Dynamic / 2,510 lbf (11,200 N) Static
• Limiting Speed: 12,800 RPM
W-5/8 INA BEARING single-direction axial deep groove ball thrust bearing.
• Bore Diameter (d): 5/8 inch (15.875 mm)
• Outside Diameter (D): 1.406 inches (35.71 mm)
• Height / Width (T): 0.625 inches (15.875 mm)
• Race Type: Grooved
• Component Design: Separable (Shaft ring, housing ring, ball/cage assembly)
• Load Capacities: 4,340 lbf (19,300 N) Axial Dynamic / 6,400 lbf (28,500 N) Axial Static
• Limiting Speed: 8,600 RPM
• Weight: 0.172 lbs (0.078 kg)
W-7/8 INA BEARING single-direction thrust ball bearing
• Bore Diameter (d): 7/8 inch (0.875 in / 22.225 mm)
• Outside Diameter (D): 1-21/32 inches (1.656 in / 42.06 mm)
• Height / Width (T): 5/8 inch (0.625 in / 15.875 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)
• Load Capacities: 4,220 lbf basic dynamic axial load and 7,860 lbf static axial load
XLS-1-3/4 XLS Series Single Row Angular Contact Ball Bearings
XLS Series Single Row Angular Contact Ball Bearings
XLS-3-1/4-M DEEP GROOVE BALL BEARING
XLS Series Single Row Angular Contact Ball Bearings
Recently Viewed
Gates® Power Transmission Hi-Power® II E180 Banded Heavy Duty V-Belt, E Section, 1-1/2 in W Top, 187 in L Outside, 29/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
DREMEL HIGH SPEED STEEL CUTTER-JWH318124 >
VISION-2 MOTOR CONTROLLER PARTS-BRWWA2903 >
Milwaukee® 49-57-8305 Quick-Change Hole Saw Cutter, 3/4 in Dia, 3/16 in D Cutting, Carbide Cutting Edge
For materials up to 3/16 in., these Carbide tipped sheet metal hole saws produce fine holes in stainless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the Carbide. Milwaukee recommends the use of Hawg Wash® cutting fluid for best results. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 2-1/4 in. diameter.
Premium line of professional quality bi-metal hole saws feature an M3 high-speed steel cutting edge, electron beam welded to a tough steel backer. Caps stand up to abuse and punishment, yet are lighter and easier to use than those of competitors. Cutting depth is 1-1/2 in. Arbor required.
Morse® AV34 Master Cobalt® Heavy Duty Hole Saw, 2-1/8 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
