RABR-B-5/8-47 INA BEARINGspecialized radial insert ball bearing with an integrated rubber interline
• Bore Diameter (d): 15 mm (approx. 0.5906 in / often used interchangeably in 5/8" or 15mm applications)
• Outside Diameter (D): 47.3 mm (1.8622 in) including the rubber sleeve
• Total Width (B2): 31.1 mm (1.2244 in)
• Locking Device: Eccentric locking collar
• Sealing: Lip/Contact "P" seals on both sides
• Rubber Hardness: 70° Shore A
Recently Viewed
RABR-B-5/8-47 INA BEARINGspecialized radial insert ball bearing with an integrated rubber interline
• Bore Diameter (d): 15 mm (approx. 0.5906 in / often used interchangeably in 5/8" or 15mm applications)
• Outside Diameter (D): 47.3 mm (1.8622 in) including the rubber sleeve
• Total Width (B2): 31.1 mm (1.2244 in)
• Locking Device: Eccentric locking collar
• Sealing: Lip/Contact "P" seals on both sides
• Rubber Hardness: 70° Shore A
Browning® 767918 VPE 200 Normal Duty Pillow Block Ball Bearing, 1-15/16 in Dia Bore, 5-23/32 to 6-21/32 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8 in OAL x 4-9/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
1/2-PT JAPAN PAINT DRIER AN ADDITIVE FOR OIL-BASED PAINTS AND LINSEED OIL TO IMPROVE DRYING QUALITIES-JWH770485 >
W-1-1/4 INA BEARINGsingle-direction thrust ball bearing
• Bore Diameter (d): 1-1/4 inches (1.250 in / 31.75 mm)
• Outside Diameter (D): 2-1/16 inches (2.0625 in / 52.39 mm)
• Height / Width (T): 5/8 inch (0.625 in / 15.88 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)
Browning® 767580 VPS 100 Intermediate Duty Pillow Block Ball Bearing, 1 in Dia Bore, 3-11/16 to 4-9/16 in L Bolt Center-to-Center, 1-7/16 in Base to Bore Centerline, 5-1/2 in OAL x 2-13/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Dodge® 093405QC Flex Module, For Use With Size 48 1.4, 3.3 A QC Coupling
Dodge® 093405QC Flex Module, For Use With Size 48 1.4, 3.3 A QC Coupling
