770485 DO-IT-BEST/HWI PRODUCTS
1/2-PT JAPAN PAINT DRIER AN ADDITIVE FOR OIL-BASED PAINTS AND LINSEED OIL TO IMPROVE DRYING QUALITIES-JWH770485 >
| Cross-Reference Number |
|---|
| 770485 |
Recently Viewed
1/2-PT JAPAN PAINT DRIER AN ADDITIVE FOR OIL-BASED PAINTS AND LINSEED OIL TO IMPROVE DRYING QUALITIES-JWH770485 >
W-1-1/4 INA BEARINGsingle-direction thrust ball bearing
• Bore Diameter (d): 1-1/4 inches (1.250 in / 31.75 mm)
• Outside Diameter (D): 2-1/16 inches (2.0625 in / 52.39 mm)
• Height / Width (T): 5/8 inch (0.625 in / 15.88 mm)
• Design Type: Grooved race, 3-piece separable construction
• Enclosure: Open (unsealed)
Browning® 767580 VPS 100 Intermediate Duty Pillow Block Ball Bearing, 1 in Dia Bore, 3-11/16 to 4-9/16 in L Bolt Center-to-Center, 1-7/16 in Base to Bore Centerline, 5-1/2 in OAL x 2-13/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Dodge® 093405QC Flex Module, For Use With Size 48 1.4, 3.3 A QC Coupling
Dodge® 093405QC Flex Module, For Use With Size 48 1.4, 3.3 A QC Coupling
Browning® 767881 VPS 200 Normal Duty Pillow Block Ball Bearing, 1-15/16 in Dia Bore, 5-23/32 to 6-21/32 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8 in OAL x 4-9/16 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
W-5/16 INA BEARING single-direction axial deep groove ball thrust bearing
• Bore Diameter (d): 5/16 inch (7.938 mm)
• Outside Diameter (D): 1.000 inch (25.40 mm)
• Height / Width (T): 0.531 inches (13.49 mm)
• Raceway Configuration: Grooved races on both washers
• Load Capacities: 1,910 lbf (8,500 N) Dynamic / 2,510 lbf (11,200 N) Static
• Limiting Speed: 12,800 RPM
