Stanley Black & Decker
POWERS 5/8" X 4" WEDGE BOLT ANCHORS PWR7262
The Screw-Bolt+â„¢ anchor is a one-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+â„¢ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
POWERS 5/8" X 4" HEX-HEAD SLEEVE ANCHORS PWR 6942
The POWER-BOLT®+ anchor is a torque controlled, heavy duty sleeve style anchor which is designed for consistent performance in cracked and un-cracked concrete. Suitable base materials include normal weight concrete and sand lightweight concrete. The anchor is manufactured with a zinc plated carbon steel bolt, sleeve, cone and expansion clip. The power Bolt+ has a low profile finished hex head.
POWERS 5/8" X 4-1/2" S/ST CONCRETE ANCHOR PWR 7332
The Power-Stud® anchor, is a fully threaded, torque controlled, Wedge Expansion Anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.
POWERS 5/8" X 3" WEDGE BOLT ANCHORS PWR 7260
The Screw-Bolt+â„¢ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+â„¢ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
POWERS 5/8" X 3-1/2" Stainless Steel CONCRETE ANCHORS PWR 7330
5/8" X 3-1/2" Stainless Steel CONCRETE WEDGE EXPANSION ANCHORS
POWERS 5/8" X 3-1/2" CONCRETE ANCHORS PWR7430
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
POWERS 5/8" X 10" ZINC CONCRETE ANCHORS PWR 7439
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
POWERS 3/8" X 7" ZINC CONCRETE ANCHORS PWR 7417
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
POWERS 3/8" X 6" MUSH/HD MASONRY SPIKES PWR 5556
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
POWERS 3/8" X 5" ZINC CONCRETE ANCHORS PWR 7416
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
POWERS 3/8" X 5" S/STEEL CONCRETE ANCHORS PWR 7316
The Power-Stud® anchor, is a fully threaded, torque-controlled, wedge expansion anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.
POWERS 3/8" X 5" MUSH/HD MASONRY SPIKES PWR 5554
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
POWERS 3/8" X 4" WEDGE BOLT ANCHORS PWR 7226
The Screw-Bolt+â„¢ anchor is a one-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+â„¢ is available as bright zinc-plated or mechanically galvanized plating. Suitable base materials include normal-weight concrete.
POWERS 3/8" X 4" MUSH/HD MASONRY SPIKES PWR 5552
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
POWERS 3/8" X 3" WEDGE BOLT ANCHORS PWR 7224
The Screw-Bolt+â„¢ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+â„¢ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.
POWERS 3/8" X 3" CONCRETE ZINC ANCHORS PWR 7413
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
POWERS 3/8" X 3-3/4" ZINC CONCRETE ANCHOR PWR 7415
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
POWERS 3/8" X 3-3/4" S/S CONCRETE ANCHORS PWR 7315
The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.
POWERS 3/8" X 3-1/2"MUSH/HD MASONRY SPIKE PWR 5551
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
POWERS 3/8" X 3-1/2" S/S CONCRETE ANCHORS PWR 7314
The Power-Stud® Anchor, is a fully threaded, torque controlled, wedge expansion Anchor. It is available in a threaded version suitable for applications in solid concrete and grout filled concrete masonry. The threaded version is produced in Type 304 and Type 316 stainless steel.
POWERS 3/8" X 3-1/2" CONCRETE ANCHORS PWR 7414
The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
POWERS 3/8" X 2-3/4" S/S CONCRETE ANCHORS PWR 7312
The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.
POWERS 3/8" X 2-1/4" ZINC CONCRETE ANCHOR PWR 7410
The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.
Recently Viewed
8-32" X 2-1/2" USS Socket Head Capscrew
7/8" X 6" USS FLAT HEAD SOCKET HEAD CAPSCREW-NBS7030870600 >
8-32" X 3/4" Flat Head Slot Machine Screws
10-24" Stainless Steel Thin Nylon Locknuts
2-1/4" -IDX4" -ODX13" CORED BARS-FEB21/4X4X13 >
5/16" X 3-1/4" USS Stainless Steel Socket Head Capscrew
