POWERS 3/8" X 3-3/4" S/S CONCRETE ANCHORS PWR 7315
The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.
-
BrandDeWALT®
-
UPC075352073156
-
Manufacturer Part Number7315
-
CountryUSA
-
Tensile Strength4075 lb
-
Thread Length2-5/8 in
-
Material304 Stainless Steel
-
Thread Size3/8-16
-
Thread TypeUNC
-
Maximum Work Thickness2-1/8 in
-
Minimum Embedment Depth1-5/8 in
-
Shear Strength3760 lb
-
Diameter3/8 in
-
Drill Size3/8 in
-
Overall Length3-3/4 in
-
FinishGalvanized
-
Head TypeThreaded Stud
- Fully threaded, medium duty all-purpose anchor
- Length ID stamped on each threaded anchor
- Anchors can be installed through the fixture for hole spotting not required
- Chamfered impact section prevents damage to threads
- Clip design prevents spinning during installation
- Nominal drill bit diameter same as anchor diameter
- 21/64 in nut height
- 13/16 in OD washer
- 9/16 in wrench
- 28 ft-lbs tightening torque
- 7/16 in fixture clearance hole
| Competitor Name | Cross-Reference Number |
|---|---|
| Fastenal | 2140563 |
-
UNSPSC31162102
-
Standards/ApprovalsUL EX1289|ASTM E488|CID A-A-1923A
-
Package Description50/BX
-
Specification Sheet
Recently Viewed
The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.
METRIC V-BELT 1532MM-JASSPA1532 >
Dodge® 033998 215 Solidlube Pillow Block Plain Sleeve Bearing, 2-15/16 in Dia Bore, 8-1/2 to 9-1/2 in L Bolt Center-to-Center, 3-1/2 in Base to Bore Centerline, 11-3/4 in OAL x 6-3/4 in OAH
Dodge® 033998 215 Solidlube Pillow Block Plain Sleeve Bearing, 2-15/16 in Dia Bore, 8-1/2 to 9-1/2 in L Bolt Center-to-Center, 3-1/2 in Base to Bore Centerline, 11-3/4 in OAL x 6-3/4 in OAH
ALFAGOMMA® TR2MT-08 TR2MT Hydraulic Pipe, Tubing & Hoses, Hose End Style, 4000 psi Working, Synthetic Rubber, Domestic
HCI Preferred Supplier 940465 3-Way Ball Valve, 3/8 in Nominal, FIPT End Style, Forged Brass Body, Full Port, PTFE Seal/PVC Cover/NBR O-Ring Softgoods
HCI Preferred Supplier 940465 3-Way Ball Valve, 3/8 in Nominal, FIPT End Style, Forged Brass Body, Full Port, PTFE Seal/PVC Cover/NBR O-Ring Softgoods
Browning® 1077403 QD Bushing, 2-1/4 in Dia Bore, 3-1/8 in Dia Barrel, 4-5/8 in Dia Flange, 1.995 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
