Stanley Black & Decker

Proto® TorquePlus™ J5536 Standard Length Socket, Imperial, 3/4 in Square Drive, 1-1/8 in

Proto® TorquePlus™ J5748 Standard Length Socket, Imperial, 1 in Square Drive, 1-1/2 in

Proto® J373 Convertible Retaining Ring-Clip Plier, Standard Jaw, 5-3/4 in OAL

The Zip-It® anchor is a one piece self-drilling anchor designed for use in hollow gypsum wallboard for light to medium duty loads. It is available in both engineered nylon and Zamac alloy for use with NO 8 screws in 3/8 to 1 in thick wallboard. The Zip-It Jr. is also available in engineered nylon and Zamac alloy for use with NO 6 screws in 3/8 to 5/8 in wallboard.

The Wall-Dog™ is an all steel, one-piece screw anchor, which features high profile threads for easy fastening into wallboard and other masonry base materials. The deep cutting, corkscrew-like threads provide for smooth entry and a powerful hold. When removed, the Wall-Dog™ leaves a much smaller hole than toggles or other systems. For aesthetic appearances, the Wall-Dog™ is available in two color finishes: white and chrome; and in two head styles: pan and oval. For fastening into wallboard or wood, no pre-drilling is required - the anchor is inserted through the fixture and screwed in with an ordinary Phillips® screwdriver. Fastening into concrete, hollow or grout-filled concrete masonry, brick and plaster requires a pre-drilled hole using a 3/16 in ANSI bit.

The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry. The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.

The Zip-It® anchor is a 1-piece self drilling anchor designed for use in gypsum wallboard for light to medium duty loads. It is available in both engineered nylon and Zamac alloy designed for use with No. 8 screws in 3/8 to 1 in THK wallboard. The Zip-It® Jr. is also available in engineered nylon and Zamac alloy designed for use with No. 6 screws in 3/8 to 5/8 in THK wallboard. These fasteners are not recommended for use overhead or applications where holding values are critical.

Pop-Toggle™ fasteners are Hollow Wall Anchors ideal for static applications requiring light to medium load performance. The fastener pre-installs without a screw, allowing for easy placement and removal of the fixture. These fasteners are not recommended for use overhead or applications where holding values are critical.

Ceiling Clips are used for acoustical applications, suspended ceiling systems, fixtures and wire components to concrete, concrete-filled steel deck and steel. Several styles and types of angled clips with pre-mounted pins are available. A Ceiling Clip without a premounted pin is also offered.

DeWALT® Powers® 08437-PWR Manual Quick-Shot Standard Dispenser, 9/9.5 oz Capacity

The AC100+ Gold is a two-component vinylester adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The adhesive is designed for bonding threaded rod and reinforcing bar elements into drilled holes in concrete and masonry base materials. It can be considered for use in solid base materials as well as hollow base materials with screen tubes.

The Pure110+ is a two-component, high strength adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The Pure110+ is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in concrete and masonry base materials and for post-installed reinforcing bar connections.

The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.

The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.

DeWALT® Powers® Wedge-Bit™ 01316-PWR Standard Drill Bit, 3/8 in Drill Bit, SDS Plus® Shank, Carbide Cutting Edge, 6 in OAL

The Power-Stud® anchor, is a fully threaded, torque controlled, Wedge Expansion Anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.

The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.

The Power-Stud® anchor is a one piece fully threaded, wedge style anchor available in carbon steel and stainless steel. Threaded, rod hanger and tie wire versions are designed for use in solid concrete. The drill bit diameter needed for proper installation is the same as the anchor diameter.

The Power-Stud®+ SD1 Anchor is a fully threaded, torque controlled, wedge expansion Anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck and grouted concrete masonry. The Anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.

The Screw-Bolt+™ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt+™ finish is available in bright zinc plated and mechanically galvanized. Suitable base materials include normal weight concrete, sand lightweight concrete, concrete over steel deck, concrete masonry and solid clay brick.

The DeWALT® ToughBox® jobsite storage chest stores all of your professional and personal items on the jobsite. These storage chests will keep your tools secure with features such as a full length, staked and welded piano hinge and a 3-point locking mechanism to help prevent break-ins. Additional features have been added to make your job easy and efficient, including integrated rails to store DeWALT® Tough System® storage modules (not included). A grommet allows for electrical access, four way skids provide access from any side and two gas springs are standard on all of our units for safe operation of the lid. All DeWALT® ToughBox® jobsite storage chests include a powder coat finish for industrial strength resilience and protection from the outdoor elements.

The Power-Stud anchor is a fully threaded, torque-controlled, wedge expansion anchor. It is available in threaded, rod hanger and tie-wire versions suitable for applications in solid concrete and grout filled concrete masonry. The carbon steel threaded version is suitable for a variety of applications. The drill bit diameter necessary for proper installation is the same as the anchor diameter.

The Screw-Bolt™ anchor is a 1-piece, heavy duty Screw Anchor with a finished hex head or flat head (countersunk). It is simple to install, easy to identify and fully removable. The patented thread design, designed for use with standard ANSI drill bits, reduces installation torque and enhances productivity. The steel threads along the anchor body tap into the hole during installation to provide keyed engagement and allow for reduced edge and spacing distances. The Screw-Bolt™ is available as bright zinc plated or mechanically galvanized plating. Suitable base materials include normal weight concrete.

The Power-Stud® anchor, is a fully threaded, torque controlled, Wedge Expansion Anchor. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in type 304 and type 316 stainless steel.