DeWALT® Power-Stud®+ SD1 7409SD1 Wedge Expansion Anchor With Expansion Clip, 1/4 in Dia, 2 in OAL, Carbon Steel
The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry. The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
-
BrandDeWALT®
-
UPC075352858678
-
Manufacturer Part Number7409SD1
-
CountryUSA
-
FinishZinc Plated
-
MaterialCarbon Steel
-
Thread TypeUNC
-
Diameter1/4 in
-
Overall Length2 in
- Consistent performance in high and low strength concrete
- Nominal drill bit size is the same as the anchor diameter
- Anchor can be installed through standard fixture holes
- Length ID code and identifying marking stamped on head of each anchor
- Anchor design allows for follow-up expansion after setting under tensile loading
-
UNSPSC31162102
-
Package Description100/BX
-
Standards/ApprovalsACI 355.2/ASTM E 488 and ICC-ES AC193|ACI 318|(ICC-ES)|ESR-2818 (ICC-ES)|ESR-2966|ICC-ES AC01 UL File No. EX1289
-
Specification Sheet
Recently Viewed
DeWALT® Power-Stud®+ SD1 7409SD1 Wedge Expansion Anchor With Expansion Clip, 1/4 in Dia, 2 in OAL, Carbon Steel
The Power-Stud+ SD1 anchor is a fully threaded, torque-controlled, wedge expansion anchor which is designed for consistent performance in cracked and uncracked concrete. Suitable base materials include normal-weight concrete, sand-lightweight concrete, concrete over steel deck, and grouted concrete masonry. The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included.
Proudly made in the USA, the machinist vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the machinist round channel vise nut is anchored at the rear to provide straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly which keeps debris out and lubrication in for a lifetime of smooth operation. The machinist vise is equipped with main jaws and a machined anvil work surface.
DeWALT® Spike® 05548-PWR 1-Piece Pin Anchor, 3/8 in Dia, 2-1/2 in OAL, Mushroom Head, Carbon Steel
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
DeWALT® Spike® 05577-PWR 1-Piece Pin Anchor, 1/2 in Dia, 6-1/2 in OAL, Mushroom Head, Carbon Steel
The Spike® is a 1-piece, vibration-resistant anchor for use in concrete block or stone. Several head styles, including tamperproof versions and anchor materials are available. The Spike® anchor is formed with an "s" shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-formed, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation.
