L.S. Starrett
Starrett® 98-8 98 Series Precision Uncalibrated Machinist's Level, 8 in L x 1-1/2 in W, Cast Iron
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 200mm (8") size, without case.
Starrett® 98-6 98 Series Precision Uncalibrated Machinist's Level, 6 in L, Cast Iron
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 150mm (6") size, without case.
Starrett® 98-12 98 Series Precision Uncalibrated Machinist's Level, 12 in L x 2 in W, Cast Iron
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 300mm (12") size, without case.
Starrett® 95419-100 Band Saw Blade Coil Stock, 3/4 in W x 0.032 in THK, 100 ft L Coil, Carbide Tooth
100 Ft. Coil, Advanzâ„¢ CG Carbide Grit Band Saw Blade Material - 3/4" width, .032" thickness, Continuous edge, Carbide Medium Grit. Made with a tungsten carbide grit bonded to an alloy back. Cuts through many hard or abrasive materials that conventional tooth blades won't cut.
Starrett® 93F 93 Series Tap Wrench, 1/4 to 1/2 in Tap, Non-Ratcheting, 13 in L, T-Handle Handle
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 330mm (13") Length, 6.4-12.7mm(1/4-1/2") Tap Size.
Starrett® 93D 93 Series Tap Wrench, 1/16 to 3/16 in Tap, Non-Ratcheting, 6 in L, T-Handle Handle
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 150mm (6") Length, 1.6-4.7mm (1/16-3/16") Tap Size.
Starrett® 93C 93 Series Tap Wrench, 1/4 to 1/2 in Tap, Non-Ratcheting, 3-1/2 in L, T-Handle Handle
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 90mm (3 1/2") Length, 6.4-12.7mm (1/4-1/2") Tap Size.
Starrett® 93B 93 Series Tap Wrench, 7/32 to 7/16 in Tap, Non-Ratcheting, 2-1/2 in L, T-Handle Handle
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 65mm (2 1/2") Length, 5.5-11mm (7/32-7/16") Tap Size.
Starrett® 93A 93 Series Tap Wrench, 1/16 to 3/16 in Tap, Non-Ratcheting, 2 in L, T-Handle Handle
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 50mm (2") Length, 1.6-4.7mm (1/16-3/16") Tap Size.
Starrett® 91C 91 Series Tap Wrench, 1/4 to 5/8 in Tap, Non-Ratcheting, Tool Steel, 12 in L, Bar Handle
The Starrett 91 Tap Wrench is strong and well proportioned. It is nicely finished and the gripping surface is properly tempered. It will firmly hold square or round shanks. It is plunger operated by knurled sleeve, the spring inside the sleeve causes plunger to back off when pressure is removed. 12" (300mm) Length, 1/4-5/8" (4.7-16mm) Tap Size.
Starrett® 91401-14-07 Duratec™ SFB Welded Band Saw Blade, 14 ft 7 in L, 1/2 in W x 0.025 in THK, 14 TPI, Carbon Steel Blade
14 Ft. 7 In. Duratecâ„¢ SFB Carbon Band Saw Blade - 1/2" Width, .025" Thickness, 14 TPI, Raker Set, Straight (Zero) Rake Angle. Made from carbon steel with a flexible back, Duratecâ„¢ SFB is ideal for economical cutting on easy-to-machine ferrous or nonferrous metal and wood. It is available in a wide range of widths, thickness, pitches and welded-to-length sizes for general purpose contour and straight cutting on a variety of machines.
Starrett® 91361-100 Band Saw Blade Coil Stock, 1/2 in W x 0.025 in THK, 6 TPI, High Carbon Steel Blade, 100 ft L Coil
100 Ft. Coil, Duratecâ„¢ SFB Carbon Band Saw Material - 1/2" Width, .025" Thickness, 6 TPI, Regular profile, Raker Set, Straight (Zero) Rake Angle. Made from carbon steel with a flexible back, Duratecâ„¢ SFB is ideal for economical cutting on easy-to-machine ferrous or nonferrous metal and wood. It is available in a wide range of widths, thickness, pitches and welded-to-length sizes for general purpose contour and straight cutting on a variety of machines.
Starrett® 910 Micrometer Case, For Use With 221, 226, 226M, 230, 23M, 426, 436.1, 1230, or 1230M Micrometer
This case protects and stores Starrett outside micrometers when not in use.
The Starrett 827 Edge Finder is for fast, accurate work location. Work surfaces may be located easily, quickly and accurately with these edge finders. Work with flat, straight edges, shoulders, grooves, round work, studs, dowels or center points and scribed lines, all can be accurately located with this handy tool. Body and contacts are made of tool steel, hardened, ground and lapped to close tolerances for diameter and concentricity. Double End, .500" Body Dia., .200" Contact Dia. and Pointed Contact.
The Starrett 827 Edge Finder is for fast, accurate work location. Work surfaces may be located easily, quickly and accurately with these edge finders. Work with flat, straight edges, shoulders, grooves, round work, studs, dowels or center points and scribed lines, all can be accurately located with this handy tool. Body and contacts are made of tool steel, hardened, ground and lapped to close tolerances for diameter and concentricity. Single End, .375" Body Dia., .200" Contact Dia.
Starrett® 818 Automatic Center Punch With Adjustable Stroke, 5/8 in Tip, 5 in OAL, Steel Tip
The Starrett 818 Automatic Center Punch with Adjustable Stroke, is lightweight with knurled aluminum handle for a positive grip.
Starrett® 79B-6 79 Series Yankee Spring Outside Caliper, 6 in, High Grade Steel
Starrett 79 Series "Yankee" Spring-Type Outside Calipers with Flat Legs and Quick-Spring Nut are made from a high-grade steel and well-finished. The legs are made of flat stock and are very durable. Calipers feature a hardened fulcrum stud, strong and flexible bow string, and centrally located leg adjustment to assure smooth action. Caliper size and capacity is 6". 6" (150mm) with Quick-Spring Nut Caliper size and capacity is 6".
Starrett® 798A-8/200 Electronic Slide Caliper With Plastic Case, 0 to 8 in, Graduations 0.0005 in, 1-7/8 in D Jaw, Stainless Steel
The Starrett Electronic Caliper features a large, easy-to-read, high contrast LCD readout. It includes IP67 protection against coolants, water, chips, dust and dirt often found in machine shop environments. Its induction type linear encoder system and inch/millimeter metric conversion makes Starrett precision measuring tools the right choice for any job. This model features 0-8" measuring range and .0005" resolution. Electronic Caliper, 0-8" (0-200mm), w/o Output, w/Plastic Case.
Starrett® 78XTZ-750 78XT Global Series® Mechanical Bore Gage, 5/8 to 3/4 in, Graduations: 0.00025 in, 2-7/16 in D Probe, Tungsten Carbide
The Starrett 78XT Series Internal Micrometer features extended travel, reducing the need to exchange anvils. The ground contact points seat the internal micrometer faster and more accurately than the spherical contacts found in other gages. The rugged and accurate internal micrometer is available individually or in economical sets from .040-12" (1-300mm). 5/8-3/4" Range, w/3 Point Carbide Contact.
Starrett® 78XTZ-1 78XT Global Series® Mechanical Bore Gage, 3/4 to 1 in, Graduations: 0.00025 in, 2-5/8 in D Probe, Tungsten Carbide
The Starrett 78XT Series Internal Micrometer features extended travel, reducing the need to exchange anvils. The ground contact points seat the internal micrometer faster and more accurately than the spherical contacts found in other gages. The rugged and accurate internal micrometer is available individually or in economical sets from .040-12" (1-300mm). 3/4-1" Range, w/3 Point Carbide Contact.
Starrett® 711HSZ 711 Last Word® Shaded Dial Test Indicator With Body Clamp, 0.03 in Measuring, 0 to 15 to 0 Dial Reading, Graduations 0.0005 in, 15/16 in Dial, 5/32 in L Tip
The Starrett 711 Last Word Dial Test Indicator is among the most versatile available. Their small size and variety of attachments will handle all jobs with ease and accuracy. A very useful feature is the shaded dial - when used with a mirror, such as in a jig bore application, the operator will always know what the correct reading is. Indicator with Body Clamp.
Starrett® 711GCSZ 711 Last Word® Shaded Dial Test Indicator, 0.03 in Measuring, 0 to 15 to 0 Dial Reading, Graduations 0.001 in, 15/16 in Dial, 5/32 in L Tip
The Starrett 711 Last Word Dial Test Indicator is among the most versatile available. Their small size and variety of attachments will handle all jobs with ease and accuracy. A very useful feature is the shaded dial - when used with a mirror, such as in a jig bore application, the operator will always know what the correct reading is. Indicator Complete with All Attachments.
Starrett® 70BX Pocket Scriber With 2-7/8 in Tungsten Carbide Point, Tungsten Carbide Tapered Tip, Knurled Grip Handle, 5-3/4 in L
The handle is made of steel, knurled and nickel plated. The scriber point is steel, properly hardened and finely tapered so the location of the point is not obscured. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The hexagon-shaped head prevents rolling.
Starrett® 70B Pocket Scriber With 2-7/8 in Long Point, Steel Tapered Tip, Knurled Grip Handle, 5-27/32 in L
The handle is made of steel, knurled and nickel plated. The scriber point is steel, properly hardened and finely tapered so the location of the point is not obscured. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The hexagon-shaped head prevents rolling.
Recently Viewed
2" -FEMALE PIPE THREADX1" -FEMALE PIPE THREAD BLACK 90-DEGREE ELBOW-JPW2X1BE >
The Grey Pneumatic 6082R is a heavy-duty, 6-point standard impact socket with a 1-1/2" drive and a2-9/16" opening. Designed for high-torque applications in industrial, construction, and mining sectors, it is forged from chrome-molybdenum alloy steel for maximum durability.
1-GL SEMI/PERM ACRYLIC FLOOR SEALR-ML-FC11501GAL>
VARIABLE SPEED BELTS-BRW2526V302>
THE ARC ABRASIVES NARROW BELT IS SPECIFICALLY ENGINEERED FOR APPLICATIONS SUCH AS: STOCK REMOVAL, DEBURRING, FLASH REMOVAL, SURFACE PREPARATION, AND FINISHING. PERFECT FOR USE ON ALUMINUM AND VARIOUS METALS.
-ARC7033811 >
