L.S. Starrett

Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 4" with Insulated Handle.

Starrett Surface Gages are designed for a wide variety of uses. This is a basic tool for machinists and toolmakers. The main uses are for accurately scribing lines, transferring measurements and for probing surfaces in inspection work. 4" Spindle, 2" x 1 1/2" Base.

The Starrett 4" Combination Square with Square Head features a reversible lock bolt, and hardened steel, photo-engraved blade with regular finish. This product also includes a cast iron head with black wrinkle finish. 4", 4R Grad, Regular Blade.

Starrett 13 squares are very popular with machinists, toolmakers, and patternmakers. The sliding blades are adjustable making it practical for a wide variety of uses. The faces of the head are ground square. 4" Satin Chrome Finish Graduated Blade.

Starrett® K60293 Duratec™ FB Welded Saw Blade, 7 ft 9-1/2 in L, 1/4 in W Blade x 0.025 in THK Blade, 24 TPI, Carbon Steel Blade

The Starrett 36" Heavy Spring-Tempered Steel Rule with Inch Graduation features a satin chrome finish. Graduations at 8ths, 16ths, quick-reading 32nds, 64ths. 36", 4R Grad.

Produced of high durability ABS plastic for extended case life, these tape measures offer overmold for improved grip. Their ergonomic design fits comfortably in the hand and incorporate industry standard standout, and improved blade protection. belt clips.

The steel long-line measuring tape replacement blade features a tough-baked yellow enamel-coated line for Starrett 530 Series 100 foot tapes.

The Starrett 124 Solid -Rod Inside Micrometer Sets are the most popular inside micrometers because of their lightness, ease of use, and range. They are very useful for measuring inside diameters of cylinders and rings and measuring parallel surfaces. The desired range is obtained by assembling rods and spacing collars to the micrometer head. Measuring rods are provided with a shoulder that is set accurately in the micrometer head and locked in position. When assembling rods to the A and B heads, the reading line on the micrometer head should be lined up with the marking on each rod (except for the 2-3" and the 50-75mm rods). Rod diameters are approximately 1/4" (6mm) on the A and B sizes, and approximately 11/32" (8.5mm) on the C size. Each rod has individual length adjustment for the anvil by means of special wrenches furnished. 8-32" Range, .001" Grad, 4 Measuring Rods with Case.

The Starrett 78XT Series Internal Micrometer features extended travel, reducing the need to exchange anvils. The ground contact points seat the internal micrometer faster and more accurately than the spherical contacts found in other gages. The rugged and accurate internal micrometer is available individually or in economical sets from .040-12" (1-300mm). 3/4-1" Range, w/3 Point Carbide Contact.

Starrett® 65940 Tru-Lok® 1-Sided Industrial Quality Measuring Tape, 25 ft L x 3/4 in W Blade, Carbon Steel Blade, Imperial Measuring System, 1/16ths, 1/32nds, 1/2 in, 3/4 in Wide Blades Graduation

The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 2.5mm (3/32") Diameter.

The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 5mm (3/16") Diameter.

The Starrett 248 Drive Pin Punch is intended for machine shop and motor service work, extra long in size, measuring 200mm (8"), with 114mm (4-1/2") bodies and 89mm (3-1/2") drive pin section. 200mm (8") Length, 5mm (3/16") Diameter.

Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 3" with Insulated Handle.

Angle Meter provides large readable scale for accurate readings from 0 Deg to 90 Deg in any quadrant. Integral magnetic base frees hands when used on ferrous surfaces. Meter measures any angle for pitch or slope and provides handy rise, run, angle and pitch information on back of the tool.

Starrett® VH0312 Fastcut™ All-Purpose Variable Pitch All-Purpose Variable Pitch Hole Saw, 3-1/2 in Dia, 1-5/8 in D Cutting, HSS/Bi-Metal Cutting Edge, 1/2-20 Arbor

The Starrett 24" Heavy Spring-Tempered Steel Rule with Inch Graduation features a satin chrome finish. Graduations at quick-reading 32nds, 64ths, aircraft quick-reading 50ths, 100ths. 24", 16R Grad.

The Starrett 24" Heavy Spring-Tempered Steel Rule with Inch Graduation features a satin chrome finish. Graduations at 8ths, 16ths, quick-reading 32nds, 64ths. 24", 4R Grad.

Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 2" with Insulated Handle.

The Starrett 124 Solid -Rod Inside Micrometer Sets are the most popular inside micrometers because of their lightness, ease of use, and range. They are very useful for measuring inside diameters of cylinders and rings and measuring parallel surfaces. The desired range is obtained by assembling rods and spacing collars to the micrometer head. Measuring rods are provided with a shoulder that is set accurately in the micrometer head and locked in position. When assembling rods to the A and B heads, the reading line on the micrometer head should be lined up with the marking on each rod (except for the 50-75mm (2-3") rods). Rod diameters are approximately 6mm (1/4") on the A and B sizes, and approximately 8.5mm (11/32") on the C size. Each rod has individual length adjustment for the anvil by means of special wrenches furnished. 2-12" Range, .001" Grad, 10 Measuring Rods with Case.

The Starrett 136 has two vials at right angles which permit leveling in both directions without moving the level from the work.

The Starrett 18" Combination Square with Square Head features a reversible lock bolt, scriber, spirit level, and hardened steel, photo-engraved blade with regular This product also includes a cast iron head with black wrinkle finish. 18", 4R Grad, Regular Blade.

The Starrett 18" Full-Flexible Steel Rule with Inch Graduation features a satin chrome finish. Graduations at quick-reading 32nds, 64ths, aircraft quick-reading 50ths, 100ths. 18", 16R Grad, Full-Flexible.