L.S. Starrett
Starrett® 70AX Pocket Scriber With 2-3/8 in Tungsten Carbide Point, Tungsten Carbide Tapered Tip, Knurled Grip Handle, 5-1/8 in L
The handle is made of steel, knurled and nickel plated. The scriber point is steel, properly hardened and finely tapered so the location of the point is not obscured. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The hexagon-shaped head prevents rolling.
Starrett® 70A Pocket Scriber With 2-3/8 in Long Point, Steel Tapered Tip, Knurled Grip Handle, 5 in L
The handle is made of steel, knurled and nickel plated. The scriber point is steel, properly hardened and finely tapered so the location of the point is not obscured. The scriber is held firmly in the handle by a knurled chuck and when not in use can be reversed, telescoped into the handle, and locked by the chuck. The hexagon-shaped head prevents rolling.
Starrett® 66T Reading Thickness Gauge, 26 Blades, 3-1/32 in L x 1/2 to 1/4 in W x 0.0015 to 0.025 in THK, Tempered Steel
The Starrett 66T, Inch Reading Thickness Gage with Tapered Leaves is used in automotive, aviation, diesel and farm equipment manufacture and services and also in jig, fixture, gage and experimental work. Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Includes 26 leaves ranging from .0015 to .025" thickness. 26 Tapered Leaves, 1/2-1/4 x 3 1/32", .0015-.025" Range.
Starrett® 66MA Metric Thickness Gage Set, 20 Pieces
The Starrett Metric Thickness Gage is used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Made in a wide range of types and sizes, each having from 6 up to 26 leaves ranging in thickness from .0015-.200" and 0.03-5mm thick straight or tapered. Metric, 20 Straight Leaves, 12.7 x 77mm, 0.05-1.0mm Range.
Starrett® 66B SAE Thickness Gage Set, 31 Pieces
The Starrett Imperial Thickness Gage is used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Made in a wide range of types and sizes, each having from 6 up to 26 leaves ranging in thickness from .0015-.200" and 0.03-5mm thick straight or tapered. 31 Straight Leaves, 1/2 x 3 1/32", .0015-.035" Range.
Starrett® 667-5 Rounded End Leave Thickness Gage, 12 in L x 1/2 in W x 0.005 in THK, Tempered Steel
These gages are widely used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. .005", 12" Length.
Starrett® 667-4 Rounded End Leave Thickness Gage, 12 in L x 1/2 in W x 0.004 in THK, Tempered Steel
These gages are widely used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. .004", 12" Length.
Starrett® 667-3 Rounded End Leave Thickness Gage, 12 in L x 1/2 in W x 0.003 in THK, Tempered Steel
These gages are widely used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. .003", 12" Length.
Starrett® 667-28 Rounded End Leave Thickness Gage, 12 in L x 1/2 in W x 0.028 in THK, Tempered Steel
These gages are widely used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. .028", 12" Length.
Starrett® 667-10 Rounded End Leave Thickness Gage, 12 in L x 1/2 in W x 0.01 in THK, Tempered Steel
These gages are widely used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. .010", 12" Length.
Starrett® 667-1 Rounded End Leave Thickness Gage, 12 in L x 1/2 in W x 0.001 in THK, Tempered Steel
These gages are widely used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. .001", 12" Length.
Starrett® 667-1 1/2 Rounded End Leave Thickness Gage, 12 in L x 1/2 in W x 0.0015 in THK, Tempered Steel
These gages are widely used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. .0015", 12" Length.
Starrett® 666-5 Straight Leave Thickness Gage With Dispenser Case, 25 ft L x 1/2 in W x 0.005 in THK, Tempered Steel
Starrett 666 Series Thickness Gage or "Feeler" Stock in Rolls. This handy product includes thickness stock, housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gaging narrow slots, etc. This stock is also useful for shimming in fixturing and die work.
Starrett® 666-2 Straight Leave Thickness Gage With Dispenser Case, 25 ft L x 1/2 in W x 0.002 in THK, Tempered Steel
Starrett 666 Series Thickness Gage or "Feeler" Stock in Rolls. This handy product includes thickness stock, housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gaging narrow slots, etc. This stock is also useful for shimming in fixturing and die work.
Starrett® 666-10 Straight Leave Thickness Gage With Dispenser Case, 25 ft L x 1/2 in W x 0.01 in THK, Tempered Steel
Starrett 666 Series Thickness Gage or "Feeler" Stock in Rolls. This handy product includes thickness stock, housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gaging narrow slots, etc. This stock is also useful for shimming in fixturing and die work.
Starrett® 66 SAE Thickness Gage Set, 26 Pieces
The Starrett 66 Inch Reading Thickness Gage with straight leaves are used in automotive, aviation, diesel and farm equipment manufacture and services and also in jig, fixture, gage and experimental work. Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Includes 26 leaves ranging from .0015 to .025" thickness.
Starrett® 65943 Tru-Lok® 1-Sided Industrial Quality Measuring Tape, 12 ft L x 1/2 in W Blade, Carbon Steel Blade, Imperial Measuring System, 1/16ths, 1/32nds, 1/2 in, 3/4 in Wide Blades Graduation
Starrett® 65943 Tru-Lok® 1-Sided Industrial Quality Measuring Tape, 12 ft L x 1/2 in W Blade, Carbon Steel Blade, Imperial Measuring System, 1/16ths, 1/32nds, 1/2 in, 3/4 in Wide Blades Graduation
Starrett® 65940 Tru-Lok® 1-Sided Industrial Quality Measuring Tape, 25 ft L x 3/4 in W Blade, Carbon Steel Blade, Imperial Measuring System, 1/16ths, 1/32nds, 1/2 in, 3/4 in Wide Blades Graduation
Starrett® 65940 Tru-Lok® 1-Sided Industrial Quality Measuring Tape, 25 ft L x 3/4 in W Blade, Carbon Steel Blade, Imperial Measuring System, 1/16ths, 1/32nds, 1/2 in, 3/4 in Wide Blades Graduation
Starrett® 657AA Indicator Holder, 1-57/64 in L x 1-5/8 in W x 1-29/32 in H Base, 9-21/34 in OAL, 1/4 in Dia x 6 in L Rod
The Starrett 657AA Magnetic Base Indicator Holder is for use with all Starrett Test, Back-Plunger, AGD, Dial and Miniature-Dial Indicators. Also accommodates similar indicators of other manufacturers.
Starrett® 6 Screw Pitch Gage With Locking Device, 4 to 42 TPI Measuring, 30 Leaves, Steel
The Starrett 6 Screw Pitch Gage includes a substantial steel case, a number of folding leaves at both end, and 30 leaves. This model features a 4-42 TPI range.
Starrett® 59A 59 Series Trammel Head, For Use With 3/4 to 1-1/2 in W Beam
The Starrett 59A is very useful for laying out and scribing circles beyond the capacity of ordinary dividers. The trammel heads have a clamping device that firmly holds various attachments. Trammel Heads (2), 2 Points (6"/150mm).
Starrett® 58S Universal Snug, 1-37/64 in L x 1-51/64 in W, For Use With 257 Surface Gages and 196M Universal Dial Indicator
With spindle hole diameters 1/4", 5/16", 3/8" (6.3, 8, 9.5mm). Gripping hole diameters range from 3/32-1/4"used on holders with smaller clamp hole.
Starrett® 57S Universal Snug, 1 in Dia x 1-7/8 in L, For Use With 257 Surface Gages and 196M Universal Dial Indicator
These universal snugs (sometimes called sleeves) provide a convenient means of attaching scribers and test indicator shanks to surface gages. These snugs will fit all Starrett® 57 and 257 surface gages and all test indicator clamps and tool post holders.
Starrett® 57C 57 Series Full Sized Surface Gage
Starrett Surface Gages are designed for a wide variety of uses. This is a basic tool for machinists and toolmakers. The main uses are for accurately scribing lines, transferring measurements and for probing surfaces in inspection work. 12" Spindle.
Recently Viewed
BBI 702160 Semi-Standard Button Socket Cap Screw, 1/4-20, 1-1/2 in OAL, Stainless Steel, A2 (18-8) Grade
BBI 702160 Semi-Standard Button Socket Cap Screw, 1/4-20, 1-1/2 in OAL, Stainless Steel, A2 (18-8) Grade
16-TOOTH CHAIN COUPLING SPROCKETS IDC C-5016 X 3/4
16-TOOTH ROLLER CHAIN COUPLING SPROCKET
HIGH GRADE GENERAL PURPOSE TEST CLIP 20-AMP A PAIR PER CARD-FOR60347 >
#10 X 1" Hex Head Tek Screws
4' X 12" BROWN FLOOR DIFFUSERS-JWH414876>
26 TOOTH SPROCKETS FOR #35 CHAIN -BRW35A26 >
