L.S. Starrett
Starrett 7/32"-TIP X 4"-LENGTH PIN PUNCHES STR 565-F
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 5.5mm (7/32") Diameter.
Starrett 7/32"-7/16" T-HANDLE TAP WRENCHES STR 93-B
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 65mm (2 1/2") Length, 5.5-11mm (7/32-7/16") Tap Size.
Starrett 7-PC PHILLIPS SCREWDRIVER SETS STR S-555-Z-7
The Starrett 555 Jewelers Screwdriver is for watch and clockmakers, jewelers, opticians, toolmakers and others who will find that the screwdriver is especially adaptable for fine, delicate work. The swivel knobs are concave to fit the finger and are hexagonal in shape to prevent rolling. The screwdriver is available individually or in sets. Blades vary in width from .025-.100" (0.6-2.5mm). There is also a blade available for 0 Phillips head screws. Overall length of screwdriver is approximately 3-3/4" (95mm). SET of 7: Nos. 555AA/A/B/C/D/E/F with Case Overall length of screwdriver is approximately 3-3/4" (95mm).
Starrett 6"-LENGTH POCKET RULERS WITH CLIPS STR C-310-K-6
The Starrett Steel Rule with Inch Graduation is furnished with Starrett satin chrome finish. Additional sizes and variations available on special order. 6", 10R Grad, Full-Flexible.
Starrett 6" TAP WRENCHES STR 93-D
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 150mm (6") Length, 1.6-4.7mm (1/16-3/16") Tap Size.
Starrett 6" SPRING NUT CALIPERS STR 79-B-6
Starrett 79 Series "Yankee" Spring-Type Outside Calipers with Flat Legs and Quick-Spring Nut are made from a high-grade steel and well-finished. The legs are made of flat stock and are very durable. Calipers feature a hardened fulcrum stud, strong and flexible bow string, and centrally located leg adjustment to assure smooth action. Caliper size and capacity is 6". 6" (150mm) with Quick-Spring Nut Caliper size and capacity is 6".
Starrett 6" SATIN CHROME RULERS STR C-604-RE-6
Starrett® C604RE-6 Spring Tempered Precision Rule, Imperial Measuring System, Graduations #4R to 8ths, 16ths, Quick-Reading 32nds, 64ths, 6 in L, Steel, Silver
Starrett 6" RULERS STR C-303-SR-6
The Starrett 6" Semi-Flexible Steel Rule with Inch Graduation features a satin chrome finish. Graduations at quick-reading 10ths, aircraft quick-reading 50ths, 32nds and 64ths. 6", 3R Grad, Semi-Flexible.
Starrett 6" PRECISION COMBINATION SQUARES STR 11-H-6-4-R
Starrett® 11H-6-4R Combination Square Set, 2 Pieces, 6 in L, Hardened Steel Blade, Square Head
Starrett 6" MACHINISTS LEVEL STR 98-6
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 150mm (6") size, without case.
Starrett 6" FULL FLEX RULERS STR C-304-R-6
Starrett® C304R-6 Full Flexible Precision Rule, Imperial Measuring System, Graduations #4R to 8ths, 16ths, Quick-Reading 32nds, 64ths, 6 in L, Steel, Silver
Starrett 6" COMBINATION SQUARE STR C-11-H-6-4-R
Starrett® C11H-6-4R Combination Square Set, 2 Pieces, 6 in L, Hardened Steel Blade, Square Head
Starrett 6" BLACK DIAL INDICATOR 0-6" .001 STR B-120-A
The Starrett 120 Series Dial Caliper is the only American made dial caliper. The caliper is used by mechanics and toolmakers everywhere. Features include direct reading, ease-of-handling, reliability and accuracy making the Starrett 120, 120M Series Dial Calipers one of the handiest measuring tools available. This model features black dial, 0-6" range, and .001" graduations. 6", Black Dial, Fitted Plastic Case.
Starrett 6" 8/12-TPI BM REC/SAW BLADE--PK/5 STR B-6-8-12-5
Starrett® B6812-5 General Purpose Reciprocating Saw Blade, 6 in L, 8 to 12, Bi-Metal Body, Universal/Toothed Edge Tang
Starrett 6" 6/10-TPI BM REC/SAW BLADE--PK/5 STR B-6-6-10-5
Starrett® B6610-5 General Purpose Reciprocating Saw Blade, 6 in L, 6 to 10, Bi-Metal Body, Universal/Toothed Edge Tang
Starrett 6" 14-TPI BM REC/SAW BLADES--PK/5 STR BT-6-14-5
Starrett® BT614-5 General Purpose Reciprocating Saw Blade, 6 in L x 3/4 in W, 14, Bi-Metal Body, Universal/Toothed Edge Tang
Starrett 6" 10/14-TPI REC/SAW BLADES--PK/5 STR B-6-10-14-5
Starrett® B61014-5 General Purpose Reciprocating Saw Blade, 6 in L, 10 to 14, Bi-Metal Body, Universal/Toothed Edge Tang
Starrett 50'-LENGTH CHALKLINE REELS/BOXES STR SCL-15
Starrett® Exact® branded chalk boxes are produced with high impact-resistant cases that hold 4 oz of chalk. The chalk box includes a 100\u0027 of line with a press to release feature. Each box is manufactured with 1:6 rewind ratio. The chalk line is secured with a stainless steel hook.
Starrett 50' STEEL LONG-LINE MEASURE TAPES STR 530-JT-50
The closed reel steel long tape features a classic vinyl clad steel case design with a rugged rewind mechanism for single user convenience and nylon rollers at case opening to reduce blade wear and for sustained field use. Blades are produced with high visibility, easy-to-read graduations, and a folding hook ring. One side in inch diameter (pi) measurements with 100th vernier scale and the other side is graduated in 1/8" and numbered in consecutive inches to each foot and repeat.
Starrett 5/8"-3/4" BORE GAGE STR 78-XTZ-750
The Starrett 78XT Series Internal Micrometer features extended travel, reducing the need to exchange anvils. The ground contact points seat the internal micrometer faster and more accurately than the spherical contacts found in other gages. The rugged and accurate internal micrometer is available individually or in economical sets from .040-12" (1-300mm). 5/8-3/4" Range, w/3 Point Carbide Contact.
Starrett 5/16" PIN PUNCHES STR 248-D
The Starrett 248 Drive Pin Punch is intended for machine shop and motor service work, extra long in size, measuring 200mm (8"), with 114mm (4-1/2") bodies and 89mm (3-1/2") drive pin section. 200mm (8") Length, 8mm (5/16") Diameter.
Starrett 5"END MEASURING ROD W/RUBBER HANDLE STR 234-A-5
Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 5" with Insulated Handle.
Starrett 5-PC DRIVE PIN PUNCH SETS IN CASES STR S-248-PC
The Starrett 248 and B248 Drive Pin Punch includes a set of 5 punches (1 of each size) in plain box. One each 248A/B/C/D/E in Vinyl Case.
Starrett 5-PC CENTER PUNCH SETS STR S-117-PC
Starrett® S117PC Punch Set, Center Style, 1/16 to 5/32 in Punch, 5 Punches, 5 Pieces
Recently Viewed
Dodge® Tigear-2® 13Q40H56 Size 13 Standard Right Angle Worm Gear Speed Reducer, Quill Input, Hollow Shaft Output, 0.32 hp, 40:1 Gear, 44 rpm Maximum Output, 319 in-lb Torque Rating
The Tigear-2® is a right angle, single stage worm gear reducer with a rugged cast iron housing and power dense gearing design to ensure maximum reliability. Stainless Steel and the exclusive E-Z-Kleen® finish are available for tough washdown applications.
Ensure the tool you need is at your fingertips with the Stanley® 10-piece screwdriver Set. Featuring multiple tip types to accommodate a wide range of fastening needs, each screwdriver has a molded, bi-material handle with 3 grip zones to accommodate precision, torque and speed applications. The tip type is conveniently identified on the handle so you can grab it and get to work with tools you can depend on.
Gardner Bender GDT-311 3-Function 11-Position 12-Range Manual Digital Multimeter, 200/500 V AC, 200 mV/2000 mV/20/200/600 V DC, 200/2000 Ohm/20/200/2000 kOhm Measuring, 500 V AC/600 V DC, 2 MOhm, 2000 Count Display
When you're ready to add a multi-meter to your toolbox this unit is a great place to start. This tester is designed to work on most household appliances and is equipped with an easy to read 3-1/2 in digital display and three testing functions: AC voltage to 500V, DC voltage to 600V and resistance to 2 meg Ohms. The 14 position manual ranging smooth rotary dial helps achieve precise and accurate readings and the low battery indicator gives a warning when the batteries need to be replaced. The durable housing is drop-resistant to 3 ft and crush rated to 150 lb. The tester is rated Cat III 600V and conforms to UL 61010-1 standards and certified to CAN/CSA C22.2. The unit comes pre-packaged with secure-fitting 26 in test leads and includes a 1 year warranty.
GEARWRENCH 3/8" drive sockets are manufactured from alloy steel for maximum durability and strength. Our off corner loading design reduces fastener rounding and the chamfered opening help guide the socket on to fasteners. Our sockets feature a double line (SAE) and knurled (metric) ring help easily identify standard and metric sockets.
FYH® UCX08 24 UCX Cylindrical Pillow Block Unit, 40 mm Dia Bore, 2-5/8 in W, 34.1 kN Dynamic/21.3 kN Static Load
FYH® UCX08 24 UCX Cylindrical Pillow Block Unit, 40 mm Dia Bore, 2-5/8 in W, 34.1 kN Dynamic/21.3 kN Static Load
