StarrettĀ® 98-6 98 Series Precision Uncalibrated Machinist's Level, 6 in L, Cast Iron
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 150mm (6") size, without case.
-
BrandStarrettĀ®
-
UPC049659504415
-
Manufacturer Part Number98-6
-
CountryUSA
-
MaterialCast Iron
-
ColorBlack/Silver
-
TypePrecision Uncalibrated
-
Vial MaterialGlass
-
Vial TypeCross Test
-
Accuracy0.005 in/ft
-
Series98 Series
-
Number of Vials1
-
Length6 in
- Ground and graduated main vials
- The base of the levels features an involute groove running the length of the base, which provides a reliable seat for round work
- The vials are adjustable to a positive setting and are housed in a satin finished brass tube with a friction-fit closing cover to prevent breakage
- Main level vials have graduations that are approximately 80-90 seconds or .005 in per foot (0.42mm per meter)
- Cast iron base for durability
- There are five, six, or seven lines on each side of the bubble, depending on the base length
- Unmilled surface
- Brass frame material
- V-shaped groove along the base provides reliable seating when leveling round items
- With the cross test vial, it is possible to simultaneously level in both directions
- This prevents inaccuracies in the main vial reading caused by canting the level sidewise on round work
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 2ZVL3 |
| MSC | 86404555 |
| Fastenal | 0324755 |
-
Alternative Part Number50441
-
UNSPSC27111802
-
Standards/ApprovalsPROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm
-
Package DescriptionEACH
-
SDS
-
Full Engineering Drawing
Recently Viewed
StarrettĀ® 98-6 98 Series Precision Uncalibrated Machinist's Level, 6 in L, Cast Iron
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 150mm (6") size, without case.
StarrettĀ® B120A-6 Accurate Direct Reading Reliable Dial Caliper With Plastic Case, 0 to 6 in, Graduation 0.001 in, 5/8 in Inside x 1-1/2 in Outside D Jaw, Stainless Steel, Satin
The Starrett 120 Series Dial Caliper is the only American made dial caliper. The caliper is used by mechanics and toolmakers everywhere. Features include direct reading, ease-of-handling, reliability and accuracy making the Starrett 120, 120M Series Dial Calipers one of the handiest measuring tools available. This model features black dial, 0-6" range, and .001" graduations. 6", Black Dial, Fitted Plastic Case.
The Starrett 827 Edge Finder is for fast, accurate work location. Work surfaces may be located easily, quickly and accurately with these edge finders. Work with flat, straight edges, shoulders, grooves, round work, studs, dowels or center points and scribed lines, all can be accurately located with this handy tool. Body and contacts are made of tool steel, hardened, ground and lapped to close tolerances for diameter and concentricity. Single End, .375" Body Dia., .200" Contact Dia.
StarrettĀ® 98-8 98 Series Precision Uncalibrated Machinist's Level, 8 in L x 1-1/2 in W, Cast Iron
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 200mm (8") size, without case.
StarrettĀ® 93C 93 Series Tap Wrench, 1/4 to 1/2 in Tap, Non-Ratcheting, 3-1/2 in L, T-Handle Handle
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 90mm (3 1/2") Length, 6.4-12.7mm (1/4-1/2") Tap Size.
StarrettĀ® 91C 91 Series Tap Wrench, 1/4 to 5/8 in Tap, Non-Ratcheting, Tool Steel, 12 in L, Bar Handle
The Starrett 91 Tap Wrench is strong and well proportioned. It is nicely finished and the gripping surface is properly tempered. It will firmly hold square or round shanks. It is plunger operated by knurled sleeve, the spring inside the sleeve causes plunger to back off when pressure is removed. 12" (300mm) Length, 1/4-5/8" (4.7-16mm) Tap Size.
