StarrettĀ® 98-8 98 Series Precision Uncalibrated Machinist's Level, 8 in L x 1-1/2 in W, Cast Iron
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 200mm (8") size, without case.
-
BrandStarrettĀ®
-
UPC049659504422
-
Manufacturer Part Number98-8
-
CountryUSA
-
MaterialCast Iron
-
ColorBlack/Silver
-
TypePrecision Uncalibrated
-
Vial MaterialGlass
-
Vial TypeCross Test
-
Accuracy0.005 in/ft
-
Height3 in
-
Width1-1/2 in
-
Series98 Series
-
Number of Vials2
-
Length8 in
- Ground and graduated main vials
- The base of the levels features an involute groove running the length of the base, which provides a reliable seat for round work
- The vials are adjustable to a positive setting and are housed in a satin finished brass tube with a friction-fit closing cover to prevent breakage
- Main level vials have graduations that are approximately 80-90 seconds or .005 in per foot (0.42mm per meter)
- Cast iron base for durability
- There are five, six, or seven lines on each side of the bubble, depending on the base length
- Unmilled surface
- Brass frame material
- V-shaped groove along the base provides reliable seating when leveling round items
- With the cross test vial, it is possible to simultaneously level in both directions
- This prevents inaccuracies in the main vial reading caused by canting the level sidewise on round work
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 2ZVL4 |
| MSC | 86404563 |
| Fastenal | 0324719 |
-
Alternative Part Number50442
-
UNSPSC27111802
-
Standards/ApprovalsPROP65: This product can expose you to chemicals including: Diisononyl phthalate (DINP)/which is known to the State of California to cause cancer and Di-isodecyl phthalate (DIDP)/which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
-
Package DescriptionEACH
-
SDS
-
Full Engineering Drawing
Recently Viewed
StarrettĀ® 98-8 98 Series Precision Uncalibrated Machinist's Level, 8 in L x 1-1/2 in W, Cast Iron
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 200mm (8") size, without case.
StarrettĀ® 93C 93 Series Tap Wrench, 1/4 to 1/2 in Tap, Non-Ratcheting, 3-1/2 in L, T-Handle Handle
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 90mm (3 1/2") Length, 6.4-12.7mm (1/4-1/2") Tap Size.
StarrettĀ® 91C 91 Series Tap Wrench, 1/4 to 5/8 in Tap, Non-Ratcheting, Tool Steel, 12 in L, Bar Handle
The Starrett 91 Tap Wrench is strong and well proportioned. It is nicely finished and the gripping surface is properly tempered. It will firmly hold square or round shanks. It is plunger operated by knurled sleeve, the spring inside the sleeve causes plunger to back off when pressure is removed. 12" (300mm) Length, 1/4-5/8" (4.7-16mm) Tap Size.
StarrettĀ® 93B 93 Series Tap Wrench, 7/32 to 7/16 in Tap, Non-Ratcheting, 2-1/2 in L, T-Handle Handle
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 65mm (2 1/2") Length, 5.5-11mm (7/32-7/16") Tap Size.
StarrettĀ® 98-12 98 Series Precision Uncalibrated Machinist's Level, 12 in L x 2 in W, Cast Iron
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 300mm (12") size, without case.
StarrettĀ® 93A 93 Series Tap Wrench, 1/16 to 3/16 in Tap, Non-Ratcheting, 2 in L, T-Handle Handle
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 50mm (2") Length, 1.6-4.7mm (1/16-3/16") Tap Size.
