StarrettĀ® B120A-6 Accurate Direct Reading Reliable Dial Caliper With Plastic Case, 0 to 6 in, Graduation 0.001 in, 5/8 in Inside x 1-1/2 in Outside D Jaw, Stainless Steel, Satin
The Starrett 120 Series Dial Caliper is the only American made dial caliper. The caliper is used by mechanics and toolmakers everywhere. Features include direct reading, ease-of-handling, reliability and accuracy making the Starrett 120, 120M Series Dial Calipers one of the handiest measuring tools available. This model features black dial, 0-6" range, and .001" graduations. 6", Black Dial, Fitted Plastic Case.
-
BrandStarrettĀ®
-
UPC049659645156
-
Manufacturer Part NumberB120A-6
-
CountryUSA
-
FinishSatin
-
MaterialStainless Steel
-
Measuring Range0 to 6 in
-
Measuring SystemSAE
-
TypeAccurate Direct Reading Reliable
-
Graduations0.001 in
-
Accuracy+/-0.001 in
-
Series120
-
Dial ColorBlack
-
Jaw Depth5/8 in Inside x 1-1/2 in Outside
- Knife-edge contacts for both inside and outside measurements
- One hand use with the thumb-operated, fine adjustment roll
- Lock screw for dial bezel and Lock screw for holding sliding jaw in position
- Positive, split-gear anti-backlash control
- Lock screw for dial bezel and lock screw for holding sliding jaw in position
- Hardened stainless steel bar, measuring surfaces, rack, gears and depth rod
- Positive, split-gear anti-backlash control
- Covered rack depth rod
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 2ZUF2 |
| MSC | 86435047 |
| Fastenal | 0324754 |
-
Alternative Part Number64515
-
UNSPSC41111622
-
Standards/ApprovalsU.S. Federal Spec|PROP65: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm
-
Package DescriptionEACH
-
Catalog
-
Full Engineering Drawing
Recently Viewed
StarrettĀ® B120A-6 Accurate Direct Reading Reliable Dial Caliper With Plastic Case, 0 to 6 in, Graduation 0.001 in, 5/8 in Inside x 1-1/2 in Outside D Jaw, Stainless Steel, Satin
The Starrett 120 Series Dial Caliper is the only American made dial caliper. The caliper is used by mechanics and toolmakers everywhere. Features include direct reading, ease-of-handling, reliability and accuracy making the Starrett 120, 120M Series Dial Calipers one of the handiest measuring tools available. This model features black dial, 0-6" range, and .001" graduations. 6", Black Dial, Fitted Plastic Case.
The Starrett 827 Edge Finder is for fast, accurate work location. Work surfaces may be located easily, quickly and accurately with these edge finders. Work with flat, straight edges, shoulders, grooves, round work, studs, dowels or center points and scribed lines, all can be accurately located with this handy tool. Body and contacts are made of tool steel, hardened, ground and lapped to close tolerances for diameter and concentricity. Single End, .375" Body Dia., .200" Contact Dia.
StarrettĀ® 98-8 98 Series Precision Uncalibrated Machinist's Level, 8 in L x 1-1/2 in W, Cast Iron
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 200mm (8") size, without case.
StarrettĀ® 93C 93 Series Tap Wrench, 1/4 to 1/2 in Tap, Non-Ratcheting, 3-1/2 in L, T-Handle Handle
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 90mm (3 1/2") Length, 6.4-12.7mm (1/4-1/2") Tap Size.
StarrettĀ® 91C 91 Series Tap Wrench, 1/4 to 5/8 in Tap, Non-Ratcheting, Tool Steel, 12 in L, Bar Handle
The Starrett 91 Tap Wrench is strong and well proportioned. It is nicely finished and the gripping surface is properly tempered. It will firmly hold square or round shanks. It is plunger operated by knurled sleeve, the spring inside the sleeve causes plunger to back off when pressure is removed. 12" (300mm) Length, 1/4-5/8" (4.7-16mm) Tap Size.
StarrettĀ® 93B 93 Series Tap Wrench, 7/32 to 7/16 in Tap, Non-Ratcheting, 2-1/2 in L, T-Handle Handle
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 65mm (2 1/2") Length, 5.5-11mm (7/32-7/16") Tap Size.
