Southwire Company
RACO® 665 Extension Ring Handy Box, Steel, 13 cu-in, 1 Gang, 1 Outlet, 6 Knockouts
Often referred to as utility boxes, Southwire - Topaz drawn handy boxes are used for switch boxes and are a great option for with machinery and appliances. Available in multiple KO sizes with or without concentric KOs and raised ground emboss with installed 10/32 grounding screw where noted. cULus listed and RoHS compliant.
KAF-TECH 3/8" LIQUIDTITE CONDUIT KAF 3/8
With a wide range of sizes and styles, Madison has the flex and liquidtight conduit that you need. From trade sizes ranging from 3/8 to 4 in, no job is too big or too small. Made from the highest quality steel, aluminum and PVC, Madison's flex and liquidtight conduit come through each and every time.
KAF-TECH 3/4" LIQUIDTITE CONDUIT KAF 3/4
Titan® type EF is manufactured with a spiral wound interlocked strip of corrosion resistant, galvanized steel. Titan® type EF is manufactured with a spiral wound interlocked strip of steel. Titan® type AEF is manufactured with a spiral wound interlocked strip of aluminum. A flame retardant, flexible PVC jacket is extruded over the metal cores. The gray jacket resists oils, mild acids and exposure to sunlight. Black available but subject to economic order quantity.
KAF-TECH 2" NON-METAL L/TITE CONDUIT KAF 2-NM
Ultratite Liquidtight Flexible Nonmetallic Conduit is suitable for the installation and protection of electrical conductors in circuits of 600 Volts nominal, or less. It may be used for Motor circuits - for conductors of motor feeders, branch and control circuits. Where the conditions of installation, operation, or maintenance require flexibility or protection from liquids, vapors, solids, or weather. It may also be used in agricultural buildings under exposed or concealed installations.
KAF-TECH 2" LIQUIDTITE ELEC/CONDUIT KAF 2
Titan® type EF is manufactured with a spiral wound interlocked strip of corrosion resistant, galvanized steel. Titan® type EF is manufactured with a spiral wound interlocked strip of steel. Titan® type AEF is manufactured with a spiral wound interlocked strip of aluminum. A flame retardant, flexible PVC jacket is extruded over the metal cores. The gray jacket resists oils, mild acids and exposure to sunlight. Black available but subject to economic order quantity.
KAF-TECH 1/2" NON-METAL L/TITE CONDUIT KAF 1/2-NM
Ultratite® type NM is manufactured with rigid polyvinyl chloride reinforcement imbedded within a flexible polyvinyl chloride wall. The construction provides excellent impact and crush strength while remaining highly flexible. The conduit resists oils, mild acids and exposure to sunlight.
KAF-TECH 1/2" LIQUIDTITE CONDUIT KAF 1/2
Titan2™ 55093801 Type EF General Purpose Liquid Tight Flexible Metal Conduit, 1/2 in Trade, 0.622 to 0.642 in ID x 0.844 in OD, 100 ft Coil L, Steel
KAF-TECH 1" NON-METAL L/TITE CONDUIT KAF 1-NM
The Southwire Company LiquidTite 1 in. x 100 ft. Non-Metallic Conduit is a flexible housing for electrical wire the provides impact protection in encased concrete or direct burial installations. This conduit is UL listed, CSA certified, green Spec and RoHS compliant. It helps protects electrical cables in burial and concrete applications.
KAF-TECH 1" LIQUIDTITE ELEC/CONDUIT KAF 1
Titan® type EF is manufactured with a spiral wound interlocked strip of corrosion resistant, galvanized steel. Titan® type EF is manufactured with a spiral wound interlocked strip of steel. Titan® type AEF is manufactured with a spiral wound interlocked strip of aluminum. A flame retardant, flexible PVC jacket is extruded over the metal cores. The gray jacket resists oils, mild acids and exposure to sunlight. Black available but subject to economic order quantity.
KAF-TECH 1-1/4" N-METAL L/TITE CONDUIT KAF 1-1/4 -NM
Ultratite Liquidtight Flexible Nonmetallic Conduit is used for the installation and protection of electrical conductors. It protects the conductors where the conditions of installation, operation or maintenance require flexibility or protection from liquids, vapors, solids or weather. It is suitable for use in exposed or concealed installations and can be used for direct burial and encased in concrete.
KAF-TECH 1-1/4" LIQUIDTITE ELE/CONDUIT KAF 1-1/4
Ultratite Liquidtight Flexible Metal Conduit is suitable for the installation and protection of electrical conductors in circuits of 600 Volts nominal, or less. Also used in industrial and commercial applications for conveyors, blowers, cranes, air conditioners, machine tooling and lubrication equipment. It can be used in conditions of installation, operation, or maintenance require flexibility or protection from liquids, vapors, solids, or weather. Applications requiring movement, crossover connections, or tight bends.
KAF-TECH 1-1/2" NONMETAL L/TITE CONDUIT KAF 1-1/2-NM
Southwire® Ultratite® 55094601 Type NM Liquid Tight Flexible Non-Metallic Conduit, 1-1/2 in Trade, 1.575 to 1.6 in ID x 1.883 in OD, 50 ft L, PVC
KAF-TECH 1-1/2" L/TITE ELEC/CONDUIT KAF 1-1/2
Ultratite Liquidtight Flexible Metal Conduit is suitable for the installation and protection of electrical conductors in circuits of 600 Volts nominal, or less. Also used in industrial and commercial applications for conveyors, blowers, cranes, air conditioners, machine tooling and lubrication equipment. It can be used in conditions of installation, operation, or maintenance require flexibility or protection from liquids, vapors, solids, or weather. Applications requiring movement, crossover connections, or tight bends.
KAF-TECH 3/4" NON-METAL L/TITE CONDUIT KAF 3/4-NM
Ultratite® type NM is manufactured with rigid polyvinyl chloride reinforcement imbedded within a flexible polyvinyl chloride wall. The construction provides excellent impact and crush strength while remaining highly flexible. The conduit resists oils, mild acids and exposure to sunlight.
GARVIN® STR50-SS 2-Piece Strut Clamp, 1/2 in Conduit, 316 Stainless Steel
Two-piece strut clamps are used to mount 1/2 in rigid conduits from strut channel. Garvin Industries two-piece construction provides a tight fit in strut. Additionally, their screw tight clamping action secures conduit in overhead strut channel or wall mount applications. stainless steel construction prevents corrosion and rust when used in damp locations.
GARVIN® STR150-SS 2-Piece Strut Clamp, 1-1/2 in Conduit, 316 Stainless Steel
Two-piece strut clamps are used to mount 1-1/2 in rigid conduits from strut channel. Garvin Industries two-piece construction provides a tight fit in strut. Additionally, their screw tight clamping action secures conduit in overhead strut channel or wall mount applications. stainless steel construction prevents corrosion and rust when used in damp locations.
GARVIN® SFP14 4-Hole Square Post Base, 1 Channel, 3-1/2 in H Base, For Use With 1-5/8 in Strut, Steel
Garvin Industries four hole single channel Post Bases are manufactured using zinc plated steel, have a 6 in by 6 in base, are 1/4 in THK and have (4) mounting holes.
GARVIN® SFF60 Flat Tee Plate, 4 Holes, 5-3/8 in L x 3-1/2 in W x 1/4 in THK, Steel
Garvin Industries flat four hole tee plates are manufactured with four 9/16 in holes and have a 1/4 in THK zinc plated steel finish.
GARVIN® SFF51 Flat Corner Plate, 4 Holes, 5-3/8 in L x 3-1/2 in W x 1/4 in THK, Steel
Garvin Industries flat four hole corner plates are manufactured with four 9/16 in holes and have a 1/4 in THK zinc plated steel finish.
GARVIN® LT75 T-Style Conduit Body With Unit Cover and Neoprene Gasket, 3/4 in Hub, Die Cast Aluminum, Powder Coated
3/4 in T-style conduit bodies are attached to 3/4 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries T-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
GARVIN® LT100 T-Style Conduit Body With Unit Cover and Neoprene Gasket, 1 in Hub, Die Cast Aluminum, Powder Coated
1 in T-style conduit bodies are attached to 1 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries T-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
GARVIN® LL75 LL-Style Conduit Body With Unit Cover and Neoprene Gasket, 3/4 in Hub, Die Cast Aluminum, Powder Coated
3/4 in LL-style conduit bodies are attached to 3/4 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LL-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
GARVIN® LC50 C-Style Conduit Body With Unit Cover and Neoprene Gasket, 1/2 in Hub, Die Cast Aluminum, Powder Coated
1/2 in C-style conduit bodies are attached to 1/2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries C-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
GARVIN® LB200 LB-Style Conduit Body With Unit Cover and Neoprene Gasket, 2 in Hub, Die Cast Aluminum, Powder Coated
2 in LB-style conduit bodies are attached to 2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LB-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation.
Recently Viewed
True Temper® 1640700 Snow Shovel, 18 in W, Steel Blade
Irwin® 43606 62T Full Length Hand Brace Auger Bit, 3/8 in Dia, 7-3/4 in OAL, 3-3/4 in L Spiral Flute
Irwin® 43606 62T Full Length Hand Brace Auger Bit, 3/8 in Dia, 7-3/4 in OAL, 3-3/4 in L Spiral Flute
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric or BOA concentric locking collar. The contact seal with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
Proto® J704B Non-Insulated Standard Wrench, 1/2 in Wrench, Polished Chrome, 4-11/32 in OAL, Alloy Steel Jaw, Alloy Steel Body, ASME B107.100, Alloy Steel
FYH® UCF207-23 4-Bolt Cylindrical Bore Normal Duty Square Flange Mount Ball Bearing Unit With Set Screw, 7/16 in Dia Bore, 3-5/8 in L Bolt Center-to-Center, 35/64 in Dia Bolt Circle
FYH® UCF207-23 4-Bolt Cylindrical Bore Normal Duty Square Flange Mount Ball Bearing Unit With Set Screw, 7/16 in Dia Bore, 3-5/8 in L Bolt Center-to-Center, 35/64 in Dia Bolt Circle
2-3/16" CARTRIDGE INSERT BEARINGS-SEAERCI203 >
