Southwire Company
Southwire - Topaz 1221 SCH 40 Junction Box, 4-3/8 in H x 4-3/8 in W x 2-3/8 in D, Screw Cover, NEMA 1/3/3S/4/4X/5/6/6P NEMA Rating, PVC
Topaz's 4" x 4" x 2" PVC products are strong and long lasting; precisely fabricated for optimal safety during installations. Our Schedule 40 PVC Junction Box is a surface mounted enclosure, designed without entrance hubs, to allow multiple conduit connections and wire splices made within. See product spec sheet for more details.
Southwire - Topaz 120 Non-Watertight Cable Clamp Connector With (2) Screws, 3/8 in Trade, 0.3 to 0.56 in Cable Openings, Die Cast Zinc
Topaz's 3/8” NM Clamp Connectors are designed for use in dry locations to bond nonmetallic sheathed cable to boxes or enclosures. Naturally corrosion resistant zinc die cast construction with two screw assembly to assure a secure connection. Long lasting and dependable fabrication; 1/2” size for cable from 2 # 14-2 with ground and 2 # 12-2 with ground. UL listed.
Southwire - Topaz 1168 Type LR Conduit Body With Junction Box, Zinc Plated Steel Screw, 3 in Hub, PVC
Topaz's Schedule 40 PVC LR Type Conduit Bodies and Junction Boxes can be glued or solvent welded to PVC electrical conduit pipe to create a wire connection point. Removable cover is included with zinc plated screws and a waterproof gasket. Available in sizes from 1/2” to 4”, LR type conduit bodies permit 90° right bends in conduit systems, provide easy access for splicing and can correct and change direction of conduit runs.
Southwire - Topaz 1137 Reducer Bushing, 2-1/2 x 2 in, PVC
Suitable for underground use,Topaz's Schedule 40 PVC Reducers are designed to fit into a bell end or female fitting to enable a reduction that accommodates conduit sized one diameter smaller. Flush style bushing in durable PVC construction; cULus approved in sizes from 3/4” X 1/2” to 4” X 3-1/2.”
Southwire - Topaz 1075 2-Piece Compression Conduit Expansion Coupling, 1-1/2 in, For Use With SCH 40/80 PVC Conduit, Type T Conduit Body, PVC
Topaz's Schedule 40 PVC Two Piece Expansion Couplings compensate for temperature-related length changes in exposed applications. Two piece, rugged and noncorrosive construction with lubricated seals provides easier movement; manufactured with a male terminator adapter end design. For use with both Schedule 40 and Schedule 80 PVC conduit; cULus approved in sizes from 1/2” to 4.”
Southwire - Topaz 1058 Compression Plain End Elbow, 3 in Trade, 45 deg, PVC
Enable fast, easy and secure 45°directional changes in conduit runs and allow for design configuration changes with Topaz's Schedule 40 PVC 45° Plain End Elbows. Manufactured from rugged, nonconductive PVC, the elbow is finished with two plain, spigot ends. Suitable for above or below ground use and in concrete casement; cULus approved in sizes from 1/2” to 6.”
Southwire - Topaz 1048 Compression Plain End Elbow, 3 in Trade, 90 deg, PVC
Enable fast, easy and secure 45°directional changes in conduit runs and allow for design configuration changes with Topaz's Schedule 40 PVC 90° Plain End Elbows. Manufactured from rugged, nonconductive PVC, the elbow is finished with two plain, spigot ends. Suitable for above or below ground use and in concrete casement; cULus approved in sizes from 1/2” to 6.”
SIGNAL® 920084608 Type RG6 Non-Plenum Coaxial Cable, 150 V AC, (1) 18 AWG Copper Clad Steel Conductor, 1000 ft L
Marketed under the SIGNAL® brand name, Coleman Cable manufacturers one of the most comprehensive security, home technology and datacom cable packages available today. Our product offering provides cable solutions for virtually every security and home technology application. Coleman Cable technical expertise and commitment to innovation ensure the most advanced and highest quality security, home technology and datacom cable in the market.
Romex® SIMpull® 28828272 Type NMB Cable, Spool Packaging, 600 V, (2) 12 AWG Copper Conductor, 400 ft L, Yellow
Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
RACO® 665 Extension Ring Handy Box, Steel, 13 cu-in, 1 Gang, 1 Outlet, 6 Knockouts
Often referred to as utility boxes, Southwire - Topaz drawn handy boxes are used for switch boxes and are a great option for with machinery and appliances. Available in multiple KO sizes with or without concentric KOs and raised ground emboss with installed 10/32 grounding screw where noted. cULus listed and RoHS compliant.
KAF-TECH 3/8" LIQUIDTITE CONDUIT KAF 3/8
With a wide range of sizes and styles, Madison has the flex and liquidtight conduit that you need. From trade sizes ranging from 3/8 to 4 in, no job is too big or too small. Made from the highest quality steel, aluminum and PVC, Madison's flex and liquidtight conduit come through each and every time.
KAF-TECH 1/2" NON-METAL L/TITE CONDUIT KAF 1/2-NM
Ultratite® type NM is manufactured with rigid polyvinyl chloride reinforcement imbedded within a flexible polyvinyl chloride wall. The construction provides excellent impact and crush strength while remaining highly flexible. The conduit resists oils, mild acids and exposure to sunlight.
KAF-TECH 3/4" NON-METAL L/TITE CONDUIT KAF 3/4-NM
Ultratite® type NM is manufactured with rigid polyvinyl chloride reinforcement imbedded within a flexible polyvinyl chloride wall. The construction provides excellent impact and crush strength while remaining highly flexible. The conduit resists oils, mild acids and exposure to sunlight.
GARVIN® STR50-SS 2-Piece Strut Clamp, 1/2 in Conduit, 316 Stainless Steel
Two-piece strut clamps are used to mount 1/2 in rigid conduits from strut channel. Garvin Industries two-piece construction provides a tight fit in strut. Additionally, their screw tight clamping action secures conduit in overhead strut channel or wall mount applications. stainless steel construction prevents corrosion and rust when used in damp locations.
GARVIN® STR150-SS 2-Piece Strut Clamp, 1-1/2 in Conduit, 316 Stainless Steel
Two-piece strut clamps are used to mount 1-1/2 in rigid conduits from strut channel. Garvin Industries two-piece construction provides a tight fit in strut. Additionally, their screw tight clamping action secures conduit in overhead strut channel or wall mount applications. stainless steel construction prevents corrosion and rust when used in damp locations.
GARVIN® SFP14 4-Hole Square Post Base, 1 Channel, 3-1/2 in H Base, For Use With 1-5/8 in Strut, Steel
Garvin Industries four hole single channel Post Bases are manufactured using zinc plated steel, have a 6 in by 6 in base, are 1/4 in THK and have (4) mounting holes.
GARVIN® SFF60 Flat Tee Plate, 4 Holes, 5-3/8 in L x 3-1/2 in W x 1/4 in THK, Steel
Garvin Industries flat four hole tee plates are manufactured with four 9/16 in holes and have a 1/4 in THK zinc plated steel finish.
GARVIN® SFF51 Flat Corner Plate, 4 Holes, 5-3/8 in L x 3-1/2 in W x 1/4 in THK, Steel
Garvin Industries flat four hole corner plates are manufactured with four 9/16 in holes and have a 1/4 in THK zinc plated steel finish.
GARVIN® LT75 T-Style Conduit Body With Unit Cover and Neoprene Gasket, 3/4 in Hub, Die Cast Aluminum, Powder Coated
3/4 in T-style conduit bodies are attached to 3/4 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries T-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
GARVIN® LT100 T-Style Conduit Body With Unit Cover and Neoprene Gasket, 1 in Hub, Die Cast Aluminum, Powder Coated
1 in T-style conduit bodies are attached to 1 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries T-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
GARVIN® LL75 LL-Style Conduit Body With Unit Cover and Neoprene Gasket, 3/4 in Hub, Die Cast Aluminum, Powder Coated
3/4 in LL-style conduit bodies are attached to 3/4 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LL-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
GARVIN® LC50 C-Style Conduit Body With Unit Cover and Neoprene Gasket, 1/2 in Hub, Die Cast Aluminum, Powder Coated
1/2 in C-style conduit bodies are attached to 1/2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries C-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation. This item has a 2 hr fire rating.
GARVIN® LB200 LB-Style Conduit Body With Unit Cover and Neoprene Gasket, 2 in Hub, Die Cast Aluminum, Powder Coated
2 in LB-style conduit bodies are attached to 2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LB-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation.
GARVIN® LB150 LB-Style Conduit Body With Unit Cover and Neoprene Gasket, 1-1/2 in Hub, Die Cast Aluminum, Powder Coated
1-1/2 in LB-style conduit bodies are attached to 1-1/2 in threaded rigid or IMC conduits when a change of direction is required. Their removable cover makes general maintece and wire pulling and feed through easy and convenient. Commonly used for electrical service entrance wires or as an economical convenience box when extra wire capacity is needed. Garvin Industries LB-style conduit bodies save time and money by eliminating costly bending of large conduits in order to change the directions of conduit runs. They allow the installer to easily bend wires into the smooth turns. Their powder coated finish and watertight gasket ensure a weatherproof installation.
Recently Viewed
GP® 9903M Standard Length Socket, 1/4 in Hex Drive, 3 mm
MORSE® 33073 2047X General Purpose Standard Spiral Point Tap, Right Hand Cutting, 7/16-20 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Black Steam Oxide Over Nitride, HSS
MORSE® 70203 4110 Premium Tool Bit, Carbide Tip, 370E Tip Material Grade, A Style, 1/4 in H x 1/4 in W Shank, Left Hand Cutting, 2 in OAL, Left Hand Cutting, Industry Standard Number: AL-4
MORSE® 15501 1439 Drill Blank, #36 Drill Blank, 2-1/2 in L, HSS
Leviton® full line of Raintight and Weather Resistant Covers are ruggedly constructed to seal out moisture, dust, debris and insects, while providing easy access to receptacles. Industrial Grade covers are designed for rugged conditions. Their sturdy, gasketed covers mount vertically or horizontally. Leviton® makes two innovative Raintight While-in-Use Covers: telescoping and metal. Designed for decks, patios, porches and similar locations, they're more than a match for the vagaries of weather. The telescoping cover sports a low-profile when in the contracted position, while the metal cover features a self-closing lid made of powder-coated cast zinc. Leviton® Weather Resistant Covers let homeowners use power tools, trimmers, sprinkler systems and pumps with confidence and safety. They're also ideal for outdoor security, landscape, accent and holiday lighting.
Leviton® commercial specification grade switches are designed to offer outstanding reliability and top performance in commercial settings. Ideal applications include municipal facilities, government buildings, malls, department stores, hospital and health care facilities, office buildings, schools, colleges, universities, houses of worship and cultural institutions. Leviton® offers a large selection of 15 and 20 A commercial switches, available in a wide variety of colors, wiring options and other features.
