Reliance Worldwide Corporation
Sharkbite® UR256 Elbow, 3/4 in Nominal, Push-to-Connect End Style, Lead-Free DZR Brass
Sharkbite® UR256 Elbow, 3/4 in Nominal, Push-to-Connect End Style, Lead-Free DZR Brass
Sharkbite® UR248A Elbow, 90 deg Elbow, 1/2 in Nominal, Push-to-Connect End Style, Brass
SharkBite Max Push-to-connect fittings are the fastest way to connect PEX, copper, CPVC, PE-RT or HDPE. A newly designed stainless steel collet retainer deliver additional strength and durability and provides a 400 PSI pressure rating. SharkBite Max fittings do not require a PEX tube liner and a re-engineered body allows you to insert the pipe using less force and greater ease. No soldering, clamps, unions, glue or special tools required. After inserting the pipe, stainless steel teeth bite down and grip the pipe tightly while a specially formulated O-ring compresses around the pipe to create a watertight seal. The fitting can be rotated after installation for quick adjustments and removing the fitting is just as fast with a disconnect tool, allowing fittings to be changed or reused.
Sharkbite® UR23037 Straight Stop, 1/2 x 3/8 in Nominal, Push-Fit x Compression End Style, 125 psi Pressure, Lead-Free DZR Brass Body
SharkBite Max Push-to-connect stop valves are the fastest and easiest way to connect to PEX, copper, CPVC, or PE-RT stub-outs, which control and shut off water flow to fixtures or appliances. This newly designed fitting features a stainless-steel collet retainer which delivers additional strength and durability. SharkBite Max fittings and valves don’t require a PEX tube liner and a re-engineered body allows you to insert the pipe using less force and greater ease. The single lever quarter turn handle allows for quick control over water flow, especially in tight spaces. No soldering, clamps, unions, glue, or special tools required. After inserting the pipe, stainless steel teeth bite down and grip the pipe tightly while a specially formulated O-ring compresses around the pipe to create a watertight seal. The valve can be rotated after installation for quick adjustments, and removing the valve is just as fast with a disconnect tool, allowing them to be changed or reused. (SharkBite push-to-connect fittings are the fastest when compared to other conventual plumbing methods. All other comparisons relate to first generation SharkBite push-to-connect products.)
Sharkbite® UR016 Max™ Coupling, 3/4 x 3/4 in Nominal, Push-to-Connect End Style, DZR Brass
Sharkbite® UR016 Max™ Coupling, 3/4 x 3/4 in Nominal, Push-to-Connect End Style, DZR Brass
Sharkbite® U870W100 Tubing, 3/4 in Nominal, 0.671 in ID x 7/8 in OD x 100 ft Coil L x 0.097 in THK Wall, White, PEX, Domestic
SharkBite PEX tubing is cross-linked polyethylene tubing for a wide range of residential and commercial plumbing applications. PEX Pipe is durable, flexible and corrosion resistant. Manufactured without an oxygen barrier for potable water systems (available in white, blue, and red). A repeating SharkBite imprint patterns provides a visual aid to determine if the tube has been inserted all the way into the SharkBite Push-to-Connect Fitting. This feature only works if the tubing is cut between the SharkBite imprint patterns. In addition to Potable Water Supply SharkBite PEX meets UL Standard for Plastic Piping in Fire Systems.
Sharkbite® U860W100 Tubing, 1/2 in Nominal, 0.475 in ID x 5/8 in OD x 100 ft Coil L x 0.07 in THK Wall, White, PEX, Domestic
SharkBite PEX tubing is cross-linked polyethylene tubing for a wide range of residential and commercial plumbing applications. PEX Pipe is durable, flexible and corrosion resistant. Manufactured without an oxygen barrier for potable water systems (available in white, blue, and red). A repeating SharkBite imprint patterns provides a visual aid to determine if the tube has been inserted all the way into the SharkBite Push-to-Connect Fitting. This feature only works if the tubing is cut between the SharkBite imprint patterns. In addition to Potable Water Supply SharkBite PEX meets UL Standard for Plastic Piping in Fire Systems.
Sharkbite® U860R100 Tubing, 1/2 in Nominal, 0.475 in ID x 5/8 in OD x 100 ft Coil L x 0.07 in THK Wall, Red, PEX, Domestic
SharkBite PEX tubing is cross-linked polyethylene tubing for a wide range of residential and commercial plumbing applications. PEX Pipe is durable, flexible and corrosion resistant. Manufactured without an oxygen barrier for potable water systems (available in white, blue, and red). A repeating SharkBite imprint patterns provides a visual aid to determine if the tube has been inserted all the way into the SharkBite Push-to-Connect Fitting. This feature only works if the tubing is cut between the SharkBite imprint patterns. In addition to Potable Water Supply SharkBite PEX meets UL Standard for Plastic Piping in Fire Systems.
Sharkbite® U860B100 Tubing, 1/2 in Nominal, 0.475 in ID x 5/8 in OD x 100 ft Coil L x 0.07 in THK Wall, Blue, PEX, Domestic
SharkBite PEX tubing is cross-linked polyethylene tubing for a wide range of residential and commercial plumbing applications. PEX Pipe is durable, flexible and corrosion resistant. Manufactured without an oxygen barrier for potable water systems (available in white, blue, and red). A repeating SharkBite imprint patterns provides a visual aid to determine if the tube has been inserted all the way into the SharkBite Push-to-Connect Fitting. This feature only works if the tubing is cut between the SharkBite imprint patterns. In addition to Potable Water Supply SharkBite PEX meets UL Standard for Plastic Piping in Fire Systems.
Sharkbite® U855W100 Tubing, 3/8 in Nominal, 0.35 in ID x 1/2 in OD x 100 ft Coil L x 0.07 in THK Wall, White, PEX, Domestic
SharkBite large-diameter Push-to-Connect fittings are the fastest way to connect PEX, copper, CPVC, PE-RT, or HDPE pipe in any combination. They are available in 1-1/4-IN, 1-1/2-IN and 2-IN CTS sizes. No soldering, clamps, unions, glue, or special tools are required. Simply insert the pipe and the teeth bite down and grip tight, while a specially formulated O-ring compresses to create a watertight seal. Changes can easily be made by rotating the fitting after installation. Removing the fitting is just as fast using a disconnect tool so fittings can be easily changed or reused. Designed with stainless steel gripping teeth for a secure connection, a chlorine-resistant O-ring for a long-lasting seal, and backed by a 25-year warranty.
Sharkbite® U850W50 Pipe, 1/4 in Nominal, PEX-B Dia Inside, Polyethylene
SharkBite PEX tubing is cross-linked polyethylene tubing for a wide range of residential and commercial plumbing applications. PEX Pipe is durable, flexible and corrosion resistant. Manufactured without an oxygen barrier for potable water systems (available in white, blue, and red). A repeating SharkBite imprint patterns provides a visual aid to determine if the tube has been inserted all the way into the SharkBite Push-to-Connect Fitting. This feature only works if the tubing is cut between the SharkBite imprint patterns. In addition to Potable Water Supply SharkBite PEX meets UL Standard for Plastic Piping in Fire Systems.
Sharkbite® U772LF Pipe Adapter, 1 in Nominal, CTS x FNPT End Style, Brass, Natural Brass/Polished Chrome, Import
SharkBite's Threaded Adapters are FNPT on one end, and allow the user to connect any appropriately sized SharkBite push-to-connect fitting on the other end. To connect the SharkBite fitting, simply push the copper tube size (CTS) end into the SharkBite fitting. This fitting is designed for potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. It is rated up to 200 deg F and 200 psi.
Sharkbite® U514LF Pipe End Cap, 1/2 in Nominal, Push-Fit End Style, Brass, Import
SharkBite® End Caps are push-to-connect and are the easiest way to cap off your Copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required. These fittings are great for stub outs and pressure testing a home as they take no time to cure. They are easily removed with a Disconnect Clip. All SharkBite® fittings are capable of being installed on either wet or dry pipe. This product is rated for up to 200 psi and 200 deg F.
Sharkbite® U3088FLEX15LF Flexible Braided Water Heater Connector, 3/4 in, FNPT x SB, 15 in L, 200 psi, Stainless Steel, Import
SharkBite's Braided Flexible Water Heater Connectors are great for easily connecting your hot and cold water supply lines to your water heater. Simply apply pipe thread to the MIP nipples on the water heater and then thread the female connection on the connector to the nipple and tighten with channel locks or a similar tool. These hoses are also available in Corrugated Stainless Steel and are also available with an integrated Ball Valve.
Sharkbite® U3088FLEX12LF Flexible Braided Water Heater Connector, 3/4 in, FNPT x SB, 12 in L, 200 psi, Stainless Steel, Import
SharkBite's Braided Flexible Water Heater Connectors are great for easily connecting your hot and cold water supply lines to your water heater. Simply apply pipe thread to the MIP nipples on the water heater and then thread the female connection on the connector to the nipple and tighten with channel locks or a similar tool. These hoses are also available in Corrugated Stainless Steel and are also available with an integrated Ball Valve.
Sharkbite® U280 Pipe Elbow, 1/2 in Nominal, Push-Fit x MNPT End Style, Brass, Domestic
SharkBite® U280 Elbow 1/2 in MNPT x 1/2 in. The Elbow allows you to easily add another line off of existing plumbing. It can be used to connect to CPVC, copper or PEX tubing. Simply cut the pipe and push on the fitting. SharkBite® fittings can easily be removed and are reusable.
Sharkbite® 23049-0000LF Straight Supply Stop Valve, 1/2 x 1/4 in Nominal, Push Connect End Style, 200 psi Pressure, Brass Body
Sharkbite® Straight Stops combine push-fit technology with a straight stop quarter turn valve. This allows the valve to control water flow to household plumbing fixtures, and provides easy shut-off of water flow for maintenance and repair, if necessary. These valves require no solder, clamps, unions or glue. The push-to-connect end allows you to push on to Copper, PEX, CPVC or PE-RT pipe easily. This product can be easily rotated after assembly for easy installation, even in tight spaces.
Sharkbite® 23036-0000LF 1/4 Turn Angle Stop Valve, 1/2 x 3/8 in Nominal, Push-Fit x Compression End Style, 200 psi Pressure, Brass Body, Polished Chrome, Import
Sharkbite® Angle Stops combine push-fit technology with an angle stop quarter turn valve. This allows the valve to control water flow to household plumbing fixtures, and provides easy shut-off of water flow for maintenance and repair, if necessary. These valves require no solder, clamps, unions or glue. The push-to-connect end allows you to push on to Copper, PEX, CPVC or PE-RT pipe easily. This product can be easily rotated after assembly for easy installation, even in tight spaces.
Sharkbite® 22441LF Water Heater Installation Kit, Import
SharkBite Push-to-Connect x Female Pipe Thread Water Heater Connection Kit is the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get SharkBite and get a grip on your next plumbing project.
John Guest® Speedfit® Twist & Lock® PEI0328 90 deg Tube Union Elbow, 3/4 in, CTS, Plastic, Import
Speedfit push-fit fittings make joining Copper, PEX, CPVC easy. Incorporates Twist-to-Lock feature for added security. Connect Cooper, PEX or CPVC in any combination. Fast and easy to use - no tools, soldering, glue or clamps. Approved for behind-the-wall applications and can be used for permanent installations. Ideal for work in tight spaces. Can be disconnected without damage to tubing
John Guest® Speedfit® Twist & Lock® PEI0320 90 deg Tube Union Elbow, 1/2 in, CTS, Plastic, Import
Speedfit push-fit fittings make joining Copper, PEX, CPVC easy. Incorporates Twist-to-Lock feature for added security. Connect Cooper, PEX or CPVC in any combination. Fast and easy to use - no tools, soldering, glue or clamps. Approved for behind-the-wall applications and can be used for permanent installations. Ideal for work in tight spaces. Can be disconnected without damage to tubing
John Guest® Speedfit® PSEISV28P Shut-off Valve, 3/4 in, CTS x NPT, Polypropylene Body
The JG CTS Shut-off valve ensures an immediate water supply cut-off with a simple turn of the valve handle. The valve is designed to work with both copper and Speedfit plastic pipe. To lock the pipe in place, simply push the pipe into the fitting and turn the nut clockwise. Should the need arise to release the pipe, turn the locking nut anti-clockwise, push the collet towards the fitting and pull the pipe to release.
John Guest® Speedfit® PSEISV20P Shut-off Valve, 1/2 in, CTS x NPT, Polypropylene Body
The JG CTS Shut-off valve ensures an immediate water supply cut-off with a simple turn of the valve handle. The valve is designed to work with both copper and Speedfit plastic pipe. To lock the pipe in place, simply push the pipe into the fitting and turn the nut clockwise. Should the need arise to release the pipe, turn the locking nut anti-clockwise, push the collet towards the fitting and pull the pipe to release.
John Guest® Speedfit® PSEI4628 End Cap, 3/4 in, CTS, Polysulfone, Import
ProLock push-fit fittings make joining PE-RT, PEX, copper, and CPVC easy. Incorporates Twist-to-Lock feature for added security. Connect two pieces of PE-RT, PEX, copper, and CPVC in any combination. Fast and easy to use - no tools, soldering, glue or clamps. Approved for behind-the-wall applications and can be used for permanent installations. Ideal for work in tight spaces. Can be disconnected without damage to tubing
John Guest® Speedfit® PSEI4620 End Cap, 1/2 in, CTS, Polysulfone, Import
ProLock push-fit fittings make joining PE-RT, PEX, copper, and CPVC easy. Incorporates Twist-to-Lock feature for added security. Connect two pieces of PE-RT, PEX, copper, and CPVC in any combination. Fast and easy to use - no tools, soldering, glue or clamps. Approved for behind-the-wall applications and can be used for permanent installations. Ideal for work in tight spaces. Can be disconnected without damage to tubing
Recently Viewed
1" BLACK CHINA BRISTLE BRUSHES-CCA2610 >
METRIC TAPERED ROLLER BEARING SET-GUL30205 >
EPC 10030318 104-R Solder Reducing Male Adapter, 1/2 x 3/8 in, Solder x MNPT, Copper, Domestic
The production of copper fittings is environmentally safe, and the industry is the undisputed leader in recycling. Over half of the copper used in manufacturing EPC copper fittings is from recycled sources. These solder joint fittings are available in 1/8 to 8 in sizes.
SOCK FILTER-NFM501900>
2.5" X 84 18723" VACUUM CLEANER HOSE-RIG19888 >
Ingersoll-Rand 2115TIMAX Impact Wrench, 3/8 in Drive, 339 Nm Forward, 407 Nm Reverse Torque Rating, 17 cfm Full Load/4 cfm Average Air Flow, 5.95 in OAL
The 2115TiMAX delivers best in class performance for a tool less than six inches long and weighing less than two and a half pounds. The minimal size of this tool will allow greater access to tight spaces, while the minimal weight will reduce operator fatigue...all while still delivering MAX performance.
