L.S. Starrett
Starrett® C11H-6-4R Combination Square Set, 2 Pieces, 6 in L, Hardened Steel Blade, Square Head
The 120 Dial Calipers are the only American made dial calipers. These calipers are used by mechanics and toolmakers everywhere. Features include direct reading, ease-of-handling, reliability and accuracy making these one of the handiest measuring tools available. This caliper has a 0-6" range and .001" graduations with a white dial. Ships in a fitted plastic case.
Starrett® C304R-6 Full Flexible Precision Rule, Imperial Measuring System, Graduations #4R to 8ths, 16ths, Quick-Reading 32nds, 64ths, 6 in L, Steel, Silver
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 150mm (6") size, without case.
Starrett® 11H-6-4R Combination Square Set, 2 Pieces, 6 in L, Hardened Steel Blade, Square Head
The Starrett 6" Semi-Flexible Steel Rule with Inch Graduation features a satin chrome finish. Graduations at quick-reading 10ths, aircraft quick-reading 50ths, 32nds and 64ths. 6", 3R Grad, Semi-Flexible.
Starrett® C604R-6 Spring Tempered Precision Rule, Imperial Measuring System, Graduations #4R to 8ths, 16ths, Quick-Reading 32nds, 64ths, 6 in L, Steel, Silver
Starrett® C604RE-6 Spring Tempered Precision Rule, Imperial Measuring System, Graduations #4R to 8ths, 16ths, Quick-Reading 32nds, 64ths, 6 in L, Steel, Silver
Starrett 79 Series "Yankee" Spring-Type Outside Calipers with Flat Legs and Quick-Spring Nut are made from a high-grade steel and well-finished. The legs are made of flat stock and are very durable. Calipers feature a hardened fulcrum stud, strong and flexible bow string, and centrally located leg adjustment to assure smooth action. Caliper size and capacity is 6". 6" (150mm) with Quick-Spring Nut Caliper size and capacity is 6".
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 150mm (6") Length, 1.6-4.7mm (1/16-3/16") Tap Size.
The Starrett Steel Rule with Inch Graduation is furnished with Starrett satin chrome finish. Additional sizes and variations available on special order. 6", 10R Grad, Full-Flexible.
The Starrett 555 Jewelers Screwdriver is for watch and clockmakers, jewelers, opticians, toolmakers and others who will find that the screwdriver is especially adaptable for fine, delicate work. The swivel knobs are concave to fit the finger and are hexagonal in shape to prevent rolling. The screwdriver is available individually or in sets. Blades vary in width from .025-.100" (0.6-2.5mm). There is also a blade available for 0 Phillips head screws. Overall length of screwdriver is approximately 3-3/4" (95mm). SET of 7: Nos. 555AA/A/B/C/D/E/F with Case Overall length of screwdriver is approximately 3-3/4" (95mm).
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 65mm (2 1/2") Length, 5.5-11mm (7/32-7/16") Tap Size.
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 5.5mm (7/32") Diameter.
3/4 x 2m/6ft, English/Metric (Left-to-Right) Measure Stix™ Adhesive Tape Measure. Manufactured with high quality precision steel. It is produced with a permanent adhesive backing providing convenient, at-a-glance measurements. Can be mounted on work benches, saw tables, drafting tables, and more. They can easily be cut to proper size with scissors. This item reads with a left to right print orientation.
The Starrett 72" Heavy Spring-Tempered Steel Rule with Inch Graduation features a satin chrome finish. Graduations at 8ths, 16ths, quick-reading 32nds, 64ths. 64ths.
The Starrett Electronic Caliper features a large, easy-to-read, high contrast LCD readout. It includes IP67 protection against coolants, water, chips, dust and dirt often found in machine shop environments. Its induction type linear encoder system and inch/millimeter metric conversion makes Starrett precision measuring tools the right choice for any job. This model features 0-8" measuring range and .0005" resolution. Electronic Caliper, 0-8" (0-200mm), w/o Output, w/Plastic Case.
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 200mm (8") size, without case.
The Starrett Shaft Alignment Clamp is designed for fast, precise alignment of motors, pumps, compressors, etc. This system is capable of addressing radial and angular misalignment problems and can be set up within minutes.
The Starrett 818 Automatic Center Punch with Adjustable Stroke, is lightweight with knurled aluminum handle for a positive grip.
Starrett® 247B Micrometer Ball Attachment, 0.2 in Ball Dia, For Use With 224A, 224AA and 436 Series Micrometer, 0.27 in Anvil and Spindle Dia
For 216, 231, 436.1, 733, 734, 3734, 1212 and 1230 Micrometers, .250" diameter Anvil and Spindle .250" Diameter Anvils.
The Starrett 657AA Magnetic Base Indicator Holder is for use with all Starrett Test, Back-Plunger, AGD, Dial and Miniature-Dial Indicators. Also accommodates similar indicators of other manufacturers.
Starrett® bevel protractors have revolving turrets with direct reading double graduations a full 0 - 180 deg in opposite directions. This permits direct reading of angles above or below the blade. Equipped with a handy spirit level.
