L.S. Starrett
Starrett® 284 Acme Standard Screw Thread Gage, 1 to 10 TPI Measuring, Steel, Black Penetrate
The Starrett 284 Acme Standard Screw Thread Gage is a standard for grinding and setting tools when cutting Acme threads, which have the same depth as square threads but the sides of the threads are at an inclination of 14-1/2 Deg (29 Deg included angle). This form of thread is used extensively and has in many instances replaced the square thread in machine construction. The advantages of the Acme thread is its strength and the ease by which it can be cut compared with square threads.
Starrett® 3805D Electronic Durometer, 0 to 100 Measuring
The 3805D is used to measure the hardness of Rubber, Hard Plastics: Harder grades such as rigid thermoplastics, plexiglass, thermoploystrene, vinyl, sheet, cellulode acetate, thermosetting, Laminates (ie fornica), Other: Paper filled calendar rolls, calendar bowls, etc. (materials that would not normally indent under fingernail pressure, such as a pocket comb or bowling ball). Note: These units are not designed to ASTM specifications and cannot be certified as such.
Starrett® 3810A Global Series® Digital Portable Electronic Hardness Tester, Leeb Scale, 200 HL Min, 960 HL Max Hardness, +/-0.5 % Accuracy, Battery
The 3810A is a state-of-the-art digital instrument designed to test the hardness of large hard metal parts. Loaded with useful functions such as USB output and a built in printer, the 3810A is an ideal choice for fast accurate hardness testing. This versatile tester can perform tests that easily convert to the most popular hardness scales, including Rockwell, Brinell, Vickers and Shore. The tester is easy to use. Simply load the impact body, place the impact body on your test piece, then push the button to begin testing. The 3810A is designed to test large hard parts. For example, tool steel should be close to 1" thick of solid material. The 3810A comes with a D impact device, calibration block, cleaning brush, manual and a carrying case.
Starrett® 387-18 Beveled Straight Edge, Imperial Measuring System, Graduations 32nds of an Inch, Steel, Regular Steel
The Starrett 387 Series Steel Straight Edge with Bevel and Graduated End is precision ground and nicely finished to rigid Starrett standards. It is unexcelled for drawing or scribing straight lines and checking surfaces for straightness. Its thickness and design permits it to retain its shape and accuracy, but still be portable and easy to handle. 18" (450mm).
Starrett® 449BZ-6R Mechanical Depth Micrometer With Non-Rotating Blade, 0 to 6 in, Graduations: 0.001 in
The Starrett 449, 449M Series Micrometer Depth Gage with Non-Rotating Blade includes a .045" thick x 1/8" wide (1.2 x 3.2mm) blade that can be turned with the fingers and positioned at any angle relative to the base. In operation, the blade does not turn, but moves perpendicularly only, permitting depth measurement of narrow shoulders without the blade rolling off. This is also ideal for slots and recesses as narrow as .045" (1.2mm). Furnished with a 2-1/2" (63mm) or a 4" (100mm) base. 0-6" Range, .001" Grad, 4" Base, 6 Rods, in Case.
Starrett® 467M Thickness Gage, 0.04 to 5 mm, Tempered Steel
The Starrett Metric Thickness Gage is used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Made in a wide range of types and sizes, each having from 6 up to 26 leaves ranging in thickness from .0015-.200" and 0.03-5mm thick straight or tapered. Thickness Gage, .0.04-5.0mm Range, 13 Leaves.
Starrett® 491-12-4R Reversible Bevel Protractor, 0 to 180 deg Measuring, 7 in L, 12 in L x 1 in W x 3/32 in THK Blade, Graduations 4R - 8ths, 16ths, Quick-Reading, 32nds, 64ths, Cast Iron
Starrett® bevel protractors have revolving turrets with direct reading double graduations a full 0 - 180 deg in opposite directions. This permits direct reading of angles above or below the blade. Equipped with a handy spirit level.
Starrett® 505P-7 Global Series® Combination Dial Reading Miter Protractor, 0 to 360 deg Measuring, 7 in L, Plastic
The 175mm (7") Plastic Miter Protractor takes error-prone calculations out of the process of miter cuts. Tool is ideal for carpenters, plumbers and all building trades that require the measuring and transferring of angles and invaluable for home use.
Starrett® 565A Drive Pin Punch, 1/16 in Steel Tip, 4 in OAL
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 1.5mm (1/16") Diameter.
Starrett® 565B Drive Pin Punch, 3/32 in Steel Tip, 4 in OAL
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 2.5mm (3/32") Diameter.
Starrett® 565C Drive Pin Punch, 1/8 in Steel Tip, 4 in OAL
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 3mm (1/8") Diameter.
Starrett® 565E Drive Pin Punch, 3/16 in Steel Tip, 4 in OAL
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 5mm (3/16") Diameter.
Starrett® 565F Drive Pin Punch, 7/32 in Steel Tip, 4 in OAL
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 5.5mm (7/32") Diameter.
Starrett® 565G Drive Pin Punch, 1/4 in Steel Tip, 4 in OAL
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 6mm (1/4") Diameter.
Starrett® 567, 7 Pieces, 1-5/16 in Capacity
V-Blocks come in a variety of styles to suit the numerous requirements of machinists. Used for general shop use and layout work, as well as for holding stock in place during light-duty milling, drilling, and grinding operations. All clamp screws have a hole to help secure the workpiece.
Starrett® 56A 56 Series Small Surface Gage
Starrett Surface Gages are designed for a wide variety of uses. This is a basic tool for machinists and toolmakers. The main uses are for accurately scribing lines, transferring measurements and for probing surfaces in inspection work. 4" Spindle, 2" x 1 1/2" Base.
Starrett® 57C 57 Series Full Sized Surface Gage
Starrett Surface Gages are designed for a wide variety of uses. This is a basic tool for machinists and toolmakers. The main uses are for accurately scribing lines, transferring measurements and for probing surfaces in inspection work. 12" Spindle.
Starrett® 57S Universal Snug, 1 in Dia x 1-7/8 in L, For Use With 257 Surface Gages and 196M Universal Dial Indicator
These universal snugs (sometimes called sleeves) provide a convenient means of attaching scribers and test indicator shanks to surface gages. These snugs will fit all Starrett® 57 and 257 surface gages and all test indicator clamps and tool post holders.
Starrett® 58S Universal Snug, 1-37/64 in L x 1-51/64 in W, For Use With 257 Surface Gages and 196M Universal Dial Indicator
With spindle hole diameters 1/4", 5/16", 3/8" (6.3, 8, 9.5mm). Gripping hole diameters range from 3/32-1/4"used on holders with smaller clamp hole.
Starrett® 59A 59 Series Trammel Head, For Use With 3/4 to 1-1/2 in W Beam
The Starrett 59A is very useful for laying out and scribing circles beyond the capacity of ordinary dividers. The trammel heads have a clamping device that firmly holds various attachments. Trammel Heads (2), 2 Points (6"/150mm).
Starrett® 6 Screw Pitch Gage With Locking Device, 4 to 42 TPI Measuring, 30 Leaves, Steel
The Starrett 6 Screw Pitch Gage includes a substantial steel case, a number of folding leaves at both end, and 30 leaves. This model features a 4-42 TPI range.
Starrett® 657AA Indicator Holder, 1-57/64 in L x 1-5/8 in W x 1-29/32 in H Base, 9-21/34 in OAL, 1/4 in Dia x 6 in L Rod
The Starrett 657AA Magnetic Base Indicator Holder is for use with all Starrett Test, Back-Plunger, AGD, Dial and Miniature-Dial Indicators. Also accommodates similar indicators of other manufacturers.
Starrett® 65940 Tru-Lok® 1-Sided Industrial Quality Measuring Tape, 25 ft L x 3/4 in W Blade, Carbon Steel Blade, Imperial Measuring System, 1/16ths, 1/32nds, 1/2 in, 3/4 in Wide Blades Graduation
Starrett® 65940 Tru-Lok® 1-Sided Industrial Quality Measuring Tape, 25 ft L x 3/4 in W Blade, Carbon Steel Blade, Imperial Measuring System, 1/16ths, 1/32nds, 1/2 in, 3/4 in Wide Blades Graduation
Starrett® 65943 Tru-Lok® 1-Sided Industrial Quality Measuring Tape, 12 ft L x 1/2 in W Blade, Carbon Steel Blade, Imperial Measuring System, 1/16ths, 1/32nds, 1/2 in, 3/4 in Wide Blades Graduation
Starrett® 65943 Tru-Lok® 1-Sided Industrial Quality Measuring Tape, 12 ft L x 1/2 in W Blade, Carbon Steel Blade, Imperial Measuring System, 1/16ths, 1/32nds, 1/2 in, 3/4 in Wide Blades Graduation
Recently Viewed
HCI Preferred Supplier 20018 Union Connector, 5/32 in Nominal, Push-In End Style, Brass
HCI Preferred Supplier 20018 Union Connector, 5/32 in Nominal, Push-In End Style, Brass
2-15/16" -ID QUICK DISCONNECT J-STYLE BUSHING-BRWJ215/16 >
V-BELTS-BRWA28>
Apex® EX-370-8 Tighter Tolerance Hex Extension, 3/8 in Hex x Square Drive, 8 in OAL
Apex® EX-370-8 Tighter Tolerance Hex Extension, 3/8 in Male Hex x Male Square Drive, 8 in OAL
Milwaukee® 48-22-8210 Rolling Jobsite Tech Bag, 1680 Denier Ballistic Polyester, Black/Red
The Milwaukee jobsite tech bag was designed with professional tradesmen in mind and is built with durable 1680D ballistic material and an impact resistant, molded base that is designed to be up to 5X more durable than competitive units. It features a protected tech pocket that provides users with a separate and secure means to store and transport a laptop or tablet while an integrated rain fly provides additional protection from the weather. Also featuring 53 total pockets, a fold down front storage panel, and a padded shoulder strap, the Milwaukee jobsite tech bag provides the extreme durability and functionality that confirms Milwaukee's commitment to providing innovative, durable storage solutions.
V-BELTS-PIXA200>
