L.S. Starrett
StarrettĀ® 818 Automatic Center Punch With Adjustable Stroke, 5/8 in Tip, 5 in OAL, Steel Tip
The Starrett 818 Automatic Center Punch with Adjustable Stroke, is lightweight with knurled aluminum handle for a positive grip.
StarrettĀ® 827A Edge Finder, 0.2 in Tip, 3/8 in Shank
The Starrett 827 Edge Finder is for fast, accurate work location. Work surfaces may be located easily, quickly and accurately with these edge finders. Work with flat, straight edges, shoulders, grooves, round work, studs, dowels or center points and scribed lines, all can be accurately located with this handy tool. Body and contacts are made of tool steel, hardened, ground and lapped to close tolerances for diameter and concentricity. Single End, .375" Body Dia., .200" Contact Dia.
StarrettĀ® 827B Edge Finder, 0.2 in Tip, 1/2 in Shank
The Starrett 827 Edge Finder is for fast, accurate work location. Work surfaces may be located easily, quickly and accurately with these edge finders. Work with flat, straight edges, shoulders, grooves, round work, studs, dowels or center points and scribed lines, all can be accurately located with this handy tool. Body and contacts are made of tool steel, hardened, ground and lapped to close tolerances for diameter and concentricity. Double End, .500" Body Dia., .200" Contact Dia. and Pointed Contact.
StarrettĀ® 910 Micrometer Case, For Use With 221, 226, 226M, 230, 23M, 426, 436.1, 1230, or 1230M Micrometer
This case protects and stores Starrett outside micrometers when not in use.
StarrettĀ® 91361-100 Band Saw Blade Coil Stock, 1/2 in W x 0.025 in THK, 6 TPI, High Carbon Steel Blade, 100 ft L Coil
100 Ft. Coil, Duratecā¢ SFB Carbon Band Saw Material - 1/2" Width, .025" Thickness, 6 TPI, Regular profile, Raker Set, Straight (Zero) Rake Angle. Made from carbon steel with a flexible back, Duratecā¢ SFB is ideal for economical cutting on easy-to-machine ferrous or nonferrous metal and wood. It is available in a wide range of widths, thickness, pitches and welded-to-length sizes for general purpose contour and straight cutting on a variety of machines.
StarrettĀ® 91401-14-07 Duratecā¢ SFB Welded Band Saw Blade, 14 ft 7 in L, 1/2 in W x 0.025 in THK, 14 TPI, Carbon Steel Blade
14 Ft. 7 In. Duratecā¢ SFB Carbon Band Saw Blade - 1/2" Width, .025" Thickness, 14 TPI, Raker Set, Straight (Zero) Rake Angle. Made from carbon steel with a flexible back, Duratecā¢ SFB is ideal for economical cutting on easy-to-machine ferrous or nonferrous metal and wood. It is available in a wide range of widths, thickness, pitches and welded-to-length sizes for general purpose contour and straight cutting on a variety of machines.
StarrettĀ® 91C 91 Series Tap Wrench, 1/4 to 5/8 in Tap, Non-Ratcheting, Tool Steel, 12 in L, Bar Handle
The Starrett 91 Tap Wrench is strong and well proportioned. It is nicely finished and the gripping surface is properly tempered. It will firmly hold square or round shanks. It is plunger operated by knurled sleeve, the spring inside the sleeve causes plunger to back off when pressure is removed. 12" (300mm) Length, 1/4-5/8" (4.7-16mm) Tap Size.
StarrettĀ® 93A 93 Series Tap Wrench, 1/16 to 3/16 in Tap, Non-Ratcheting, 2 in L, T-Handle Handle
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 50mm (2") Length, 1.6-4.7mm (1/16-3/16") Tap Size.
StarrettĀ® 93B 93 Series Tap Wrench, 7/32 to 7/16 in Tap, Non-Ratcheting, 2-1/2 in L, T-Handle Handle
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 65mm (2 1/2") Length, 5.5-11mm (7/32-7/16") Tap Size.
StarrettĀ® 93C 93 Series Tap Wrench, 1/4 to 1/2 in Tap, Non-Ratcheting, 3-1/2 in L, T-Handle Handle
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 90mm (3 1/2") Length, 6.4-12.7mm (1/4-1/2") Tap Size.
StarrettĀ® 93D 93 Series Tap Wrench, 1/16 to 3/16 in Tap, Non-Ratcheting, 6 in L, T-Handle Handle
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 150mm (6") Length, 1.6-4.7mm (1/16-3/16") Tap Size.
StarrettĀ® 93F 93 Series Tap Wrench, 1/4 to 1/2 in Tap, Non-Ratcheting, 13 in L, T-Handle Handle
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 330mm (13") Length, 6.4-12.7mm(1/4-1/2") Tap Size.
StarrettĀ® 95419-100 Band Saw Blade Coil Stock, 3/4 in W x 0.032 in THK, 100 ft L Coil, Carbide Tooth
100 Ft. Coil, Advanzā¢ CG Carbide Grit Band Saw Blade Material - 3/4" width, .032" thickness, Continuous edge, Carbide Medium Grit. Made with a tungsten carbide grit bonded to an alloy back. Cuts through many hard or abrasive materials that conventional tooth blades won't cut.
StarrettĀ® 98-12 98 Series Precision Uncalibrated Machinist's Level, 12 in L x 2 in W, Cast Iron
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 300mm (12") size, without case.
StarrettĀ® 98-6 98 Series Precision Uncalibrated Machinist's Level, 6 in L, Cast Iron
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 150mm (6") size, without case.
StarrettĀ® 98-8 98 Series Precision Uncalibrated Machinist's Level, 8 in L x 1-1/2 in W, Cast Iron
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 200mm (8") size, without case.
StarrettĀ® 98Z-12 98 Series Non-Magnetic Precision Uncalibrated Machinist's Level, 12 in L, Cast Iron
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 300mm (12") size, with wood case.
StarrettĀ® A1 With Pilot Drill, 1/2-20 Arbor, 1/4 in Drill, 3/8 in Chuck, 11/32 in Hex Shank, For Use With 9/16 in to 1-3/16 in Hole Saw and 3/8 in Chuck, HSS
Hole Saw arbor supplied with 6.35mm (1/4") pilot drill. Shank size 8.75mm (11/32"). Screw thread 1/2"-20. Screw thread 1/2"-20.
StarrettĀ® A10 Quick-Hitch Hole Saw Arbor, For Use With 1-1/4 to 8-9/32 in Dia Hole Saws, HSS
Hole Saw arbor supplied with 6.35mm (1/4") pilot drill. Shank size 8.75mm (11/32"). Screw thread 5/8"-18. Screw thread 5/8"-18.
StarrettĀ® AM-2 Magnetic Angle Meter, 5 in L Base, 5 in OAH
Angle Meter provides large readable scale for accurate readings from 0 Deg to 90 Deg in any quadrant. Integral magnetic base frees hands when used on ferrous surfaces. Meter measures any angle for pitch or slope and provides handy rise, run, angle and pitch information on back of the tool.
StarrettĀ® AO12-12 791 Top Mount Measuring Tape, 12 ft L x 1/2 in W Blade, Imperial/Metric Measuring System, S1 Graduation
StarrettĀ® AO12-12 791 Top Mount Measuring Tape, 12 ft L x 1/2 in W Blade, Imperial/Metric Measuring System, S1 Graduation
StarrettĀ® B120A-6 Accurate Direct Reading Reliable Dial Caliper With Plastic Case, 0 to 6 in, Graduation 0.001 in, 5/8 in Inside x 1-1/2 in Outside D Jaw, Stainless Steel, Satin
The Starrett 120 Series Dial Caliper is the only American made dial caliper. The caliper is used by mechanics and toolmakers everywhere. Features include direct reading, ease-of-handling, reliability and accuracy making the Starrett 120, 120M Series Dial Calipers one of the handiest measuring tools available. This model features black dial, 0-6" range, and .001" graduations. 6", Black Dial, Fitted Plastic Case.
StarrettĀ® B1210-5 General Purpose Reciprocating Saw Blade, 12 in L x 3/4 in W, 10, Bi-Metal Body, Universal/Toothed Edge Tang
StarrettĀ® B1210-5 General Purpose Reciprocating Saw Blade, 12 in L x 3/4 in W, 10, Bi-Metal Body, Universal/Toothed Edge Tang
StarrettĀ® B121014-5 General Purpose Reciprocating Saw Blade, 12 in L x 3/4 in W, 10 to 14, Bi-Metal Body, Universal/Toothed Edge Tang
StarrettĀ® B121014-5 General Purpose Reciprocating Saw Blade, 12 in L x 3/4 in W, 10 to 14, Bi-Metal Body, Universal/Toothed Edge Tang
Recently Viewed
KleinĀ® 11045 Insulated Wire Stripper/Cutter, 18 to 10 AWG Cable/Wire
This Klein tools wire stripper/cutter is designed to cut solid wire. The precision ground stripping holes cleanly cut wire and aid in easy removal of insulation. A narrow nose helps this tool fit easily into tight places.
MORSEĀ® 90730 5943G Center Cutting Regular Length Single End End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, TiN Coated
MORSEĀ® 90730 5943G Center Cutting Regular Length Single End End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, TiN Coated
MORSEĀ® 90716 5943G Center Cutting Regular Length Single End End Mill, 9/32 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL, TiN Coated
MORSEĀ® 90716 5943G Center Cutting Regular Length Single End End Mill, 9/32 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL, TiN Coated
MORSEĀ® 90734 5943G Center Cutting Regular Length Single End End Mill, 3/4 in Dia Cutter, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL, TiN Coated
MORSEĀ® 90734 5943G Center Cutting Regular Length Single End End Mill, 3/4 in Dia Cutter, 1-1/2 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 4 in OAL, TiN Coated
MORSEĀ® 90010 5944G Center Cutting Regular Length Single End End Mill, 3/16 in Dia Cutter, 5/8 in Length of Cut, 2 Flutes, 3/16 in Dia Shank, 2 in OAL, TiN Coated
MORSEĀ® 90010 5944G Center Cutting Regular Length Single End End Mill, 3/16 in Dia Cutter, 5/8 in Length of Cut, 2 Flutes, 3/16 in Dia Shank, 2 in OAL, TiN Coated
MORSEĀ® 59328 5961 Center Cutting Regular Length Single End End Mill, 16 mm Dia Cutter, 32 mm Length of Cut, 4 Flutes, 16 mm Dia Shank, 89 mm OAL, Bright
MORSEĀ® 59328 5961 Center Cutting Regular Length Single End End Mill, 16 mm Dia Cutter, 32 mm Length of Cut, 4 Flutes, 16 mm Dia Shank, 89 mm OAL, Bright
