L.S. Starrett
Starrett 1/16"-3/16" T-HANDLE TAP WRENCHES STR 93-A
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 50mm (2") Length, 1.6-4.7mm (1/16-3/16") Tap Size.
Starrett 1/16"-TIP X 4"-LENGTH PIN PUNCHES STR 565-A
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 1.5mm (1/16") Diameter.
Starrett 1/2-1/4 X 6".002-.015 RANGE GAGE STR 172-CT
The Starrett English Thickness Gage is used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. These gages are Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Made in a wide range of types and sizes, each having from 6 up to 26 leaves ranging in thickness from .0015-.200" and 0.03-5mm thick straight or tapered. 8 Tapered Leaves, 1/2-1/4 x 6", inch reading, .002-.015" Range.
Starrett 1/2" X 12' YEL/SHRINK TAPE MEASURE Y-12-12-S
Starrett® 65943 Tru-Lok® 1-Sided Industrial Quality Measuring Tape, 12 ft L x 1/2 in W Blade, Carbon Steel Blade, Imperial Measuring System, 1/16ths, 1/32nds, 1/2 in, 3/4 in Wide Blades Graduation
Starrett 1/2" X 48" MEASURE STIX STR SM-44-W
4ft, English (Left-to-Right) Measure Stixâ„¢ Adhesive Tape Measure. Manufactured with high quality precision steel. It is produced with a permanent adhesive backing providing convenient, at-a-glance measurements. Can be mounted on work benches, saw tables, drafting tables, and more. They can easily be cut to proper size with scissors. This item reads with a left to right print orientation.
Starrett 1/2"X12' ORANGE HIVIZ TAPE MEASURE STR O-12-12
Starrett® AO12-12 791 Top Mount Measuring Tape, 12 ft L x 1/2 in W Blade, Imperial/Metric Measuring System, S1 Graduation
Starrett 1/32"-1/4" RADIUS GAGES STR 178-A
The Starrett 178 Series Fillet or Radius Inch Reading Gages are very useful for tool and diemakers, machinists, screw machine operators, patternmakers and other mechanics to lay out and check radii of tools, dies, patterns, and more. 30 Leaves, 1/32-1/4" Range, 64ths increments.
Starrett 1/4" PIN PUNCHES STR 248-C
The Starrett 248 Drive Pin Punch is intended for machine shop and motor service work, extra long in size, measuring 200mm (8"), with 114mm (4-1/2") bodies and 89mm (3-1/2") drive pin section. 200mm (8") Length, 6mm (1/4") Diameter.
Starrett 1/4"-1/2" T-HANDLE TAP WRENCHES STR 93-C
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 90mm (3 1/2") Length, 6.4-12.7mm (1/4-1/2") Tap Size.
Starrett 1/4"-1/2" TAP WRENCHES STR 93-F
The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 330mm (13") Length, 6.4-12.7mm(1/4-1/2") Tap Size.
Starrett 1/4"-TIP X 4"-LENGTH PIN PUNCHES STR 565-G
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 6mm (1/4") Diameter.
Starrett 1/8" TO 1/4" BODY CLAMPS STR PT-07101-F
Body Clamp (was 711-28, 29, 30).
Starrett 1/8"-TIP X 4"-LENGTH PIN PUNCHES STR 565-C
The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 3mm (1/8") Diameter.
Starrett 1/8"X 8" XL DRIVE PIN PUNCHES STR 248-A
The Starrett 248 Drive Pin Punch is intended for machine shop and motor service work, extra long in size, measuring 200mm (8"), with 114mm (4-1/2") bodies and 89mm (3-1/2") drive pin section. 200mm (8") Length, 3mm (1/8") Diameter.
Starrett 1/8"X 8" XL DRIVE PIN PUNCHES STR 248-E
The Starrett 248 Drive Pin Punch is intended for machine shop and motor service work, extra long in size, measuring 200mm (8"), with 114mm (4-1/2") bodies and 89mm (3-1/2") drive pin section. 200mm (8") Length, 9.5mm (3/8") Diameter.
Starrett 10" 18-TPI HACKSAW BLADES STR GF-1018
Starrett® GF1018 All Purpose Hand Hacksaw Blade, 1/2 in W x 10 in L Blade, High Carbon Steel Cutting Edge, High Carbon Steel Blade, 18 TPI
Starrett 10" 24-TPI HACKSAW BLADES STR GF-1024
Starrett® GF1024 All Purpose Hand Hacksaw Blade, 1/2 in W x 10 in L Blade, High Carbon Steel Cutting Edge, High Carbon Steel Blade, 24 TPI
Starrett 10" 32-TPI HACKSAW BLADES STR SF-1032
Starrett® SF1032 Unique Hand Hacksaw Blade, 1/2 in W x 10 in L Blade, HSS Cutting Edge, 32 TPI, B-Metal/HSS Blade
Starrett 11-R SERIES COMB/SQUARE 4" RULES STR B-4-4-R
Starrett® B4-4R Inch Reading Combination Square Blade, 4 in L Steel Blade, 8ths, 16ths, Quick-Reading 32nds, 64ths Graduation
Starrett 12' EXACT TAPE MEASURES STR KTX-12-12-N
Produced of high durability ABS plastic for extended case life, these tape measures offer overmold for improved grip. Their ergonomic design fits comfortably in the hand and incorporate industry standard standout, and improved blade protection. belt clips.
Starrett 12" #4-R COMBINATION SQUARE SETS STR C-9-12-4-R
Starrett® C9-12-4R Combination Square Set, 4 Pieces, 12 in L, Hardened Steel Blade, Square/Center/Protractor Head
Starrett 12" 10-TPI BM REC/SAW BLADES--PK/5 STR B-12-10-5
Starrett® B1210-5 General Purpose Reciprocating Saw Blade, 12 in L x 3/4 in W, 10, Bi-Metal Body, Universal/Toothed Edge Tang
Starrett 12" 10/14-TPI REC/SAW BLADES--PK/5 STR B-12-10-14-5
Starrett® B121014-5 General Purpose Reciprocating Saw Blade, 12 in L x 3/4 in W, 10 to 14, Bi-Metal Body, Universal/Toothed Edge Tang
Starrett 12" 14-TPI HACKSAW BLADES STR SF-1214
Starrett® SF1214 Unique Hand Hacksaw Blade, 1/2 in W x 12 in L Blade, HSS Cutting Edge, 14 TPI, B-Metal/HSS Blade
Recently Viewed
FR-770-VC Flame Retardent Green Hoods Made From Flame Resistant Knit Materials. All Stock Styles Are 13" X 5" X 18"
FLAME RETARDENT GREEN HOODS MADE FROM FLAME RESISTANT KNIT MATERIALS. ALL STOCK STYLES ARE 13" X 5" X 18"-STCFR770VC >
7-PIECE 3/8" -DRIVEXL HEX DRIVER/HEX BIT SOCKET SET-ARS15425 >
FITTING DRIVE TOOL STRAIGHT-LNC11485>
50-BB-15-H-5/8 15 Tooth #50 Chain Idler
15 TOOTH #50 CHAIN IDLER SPROCKETS-IDC50BB15H5/8 >
The Tapper® anchoring system is a family of screw anchors, specially designed drill bits and installation tools designed to meet the needs of most light to medium duty applications in concrete, block and brick. The Tapper® concrete screw anchor is produced in either hex washer head or Phillips flat head styles from Perma-Seal™ coated or zinc plated carbon steel and type 304 stainless steel. For heavy duty applications, the 3/8 in size is made in zinc plated carbon steel.
2-1/4-AMP 600-V AC TD FUSES-EDIEDCC2.25 >
