L.S. Starrett

The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 50mm (2") Length, 1.6-4.7mm (1/16-3/16") Tap Size.

The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 1.5mm (1/16") Diameter.

The Starrett English Thickness Gage is used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. These gages are Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Made in a wide range of types and sizes, each having from 6 up to 26 leaves ranging in thickness from .0015-.200" and 0.03-5mm thick straight or tapered. 8 Tapered Leaves, 1/2-1/4 x 6", inch reading, .002-.015" Range.

Starrett® 65943 Tru-Lok® 1-Sided Industrial Quality Measuring Tape, 12 ft L x 1/2 in W Blade, Carbon Steel Blade, Imperial Measuring System, 1/16ths, 1/32nds, 1/2 in, 3/4 in Wide Blades Graduation

4ft, English (Left-to-Right) Measure Stix™ Adhesive Tape Measure. Manufactured with high quality precision steel. It is produced with a permanent adhesive backing providing convenient, at-a-glance measurements. Can be mounted on work benches, saw tables, drafting tables, and more. They can easily be cut to proper size with scissors. This item reads with a left to right print orientation.

Starrett® AO12-12 791 Top Mount Measuring Tape, 12 ft L x 1/2 in W Blade, Imperial/Metric Measuring System, S1 Graduation

The Starrett 178 Series Fillet or Radius Inch Reading Gages are very useful for tool and diemakers, machinists, screw machine operators, patternmakers and other mechanics to lay out and check radii of tools, dies, patterns, and more. 30 Leaves, 1/32-1/4" Range, 64ths increments.

The Starrett 248 Drive Pin Punch is intended for machine shop and motor service work, extra long in size, measuring 200mm (8"), with 114mm (4-1/2") bodies and 89mm (3-1/2") drive pin section. 200mm (8") Length, 6mm (1/4") Diameter.

The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 90mm (3 1/2") Length, 6.4-12.7mm (1/4-1/2") Tap Size.

The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 330mm (13") Length, 6.4-12.7mm(1/4-1/2") Tap Size.

The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 6mm (1/4") Diameter.

Body Clamp (was 711-28, 29, 30).

The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 3mm (1/8") Diameter.

The Starrett 248 Drive Pin Punch is intended for machine shop and motor service work, extra long in size, measuring 200mm (8"), with 114mm (4-1/2") bodies and 89mm (3-1/2") drive pin section. 200mm (8") Length, 3mm (1/8") Diameter.

The Starrett 248 Drive Pin Punch is intended for machine shop and motor service work, extra long in size, measuring 200mm (8"), with 114mm (4-1/2") bodies and 89mm (3-1/2") drive pin section. 200mm (8") Length, 9.5mm (3/8") Diameter.

Starrett® GF1018 All Purpose Hand Hacksaw Blade, 1/2 in W x 10 in L Blade, High Carbon Steel Cutting Edge, High Carbon Steel Blade, 18 TPI

Starrett® GF1024 All Purpose Hand Hacksaw Blade, 1/2 in W x 10 in L Blade, High Carbon Steel Cutting Edge, High Carbon Steel Blade, 24 TPI

Starrett® SF1032 Unique Hand Hacksaw Blade, 1/2 in W x 10 in L Blade, HSS Cutting Edge, 32 TPI, B-Metal/HSS Blade

Starrett® B4-4R Inch Reading Combination Square Blade, 4 in L Steel Blade, 8ths, 16ths, Quick-Reading 32nds, 64ths Graduation

Produced of high durability ABS plastic for extended case life, these tape measures offer overmold for improved grip. Their ergonomic design fits comfortably in the hand and incorporate industry standard standout, and improved blade protection. belt clips.

Starrett® C9-12-4R Combination Square Set, 4 Pieces, 12 in L, Hardened Steel Blade, Square/Center/Protractor Head

Starrett® B1210-5 General Purpose Reciprocating Saw Blade, 12 in L x 3/4 in W, 10, Bi-Metal Body, Universal/Toothed Edge Tang

Starrett® B121014-5 General Purpose Reciprocating Saw Blade, 12 in L x 3/4 in W, 10 to 14, Bi-Metal Body, Universal/Toothed Edge Tang

Starrett® SF1214 Unique Hand Hacksaw Blade, 1/2 in W x 12 in L Blade, HSS Cutting Edge, 14 TPI, B-Metal/HSS Blade