Single Groove Sheaves
IDC Select® light duty bored-to-size sheaves are available in single and two groove designs for A-B and 3L-4L-5L belts. Each unit is supplied with a keyway and a set screw over the keyway. They are precision machined from 25 gray cast iron, statically balanced, painted with a baked enamel finish and individually packaged.
IDC Select® light duty bored-to-size sheaves are available in single and two groove designs for A-B and 3L-4L-5L belts. Each unit is supplied with a keyway and a set screw over the keyway. They are precision machined from 25 gray cast iron, statically balanced, painted with a baked enamel finish and individually packaged.
1/3-V-3.351610 Dodge® 112175 Single Groove Sheave, Taper-Lock® Bore, 1/2 to 1-11/16 in Dia Bore, 3.35 in OD, 3.3 in Dia Pitch, 1.06 in W Face
All Dodge® V-drive sheaves are manufactured to ISO 9002 quality standards with precision machining that meets or exceeds joint RMA/MPTA industry standards for smooth operation and extended belt life. This provides low economical costs per hp transmitted due to shock load and vibration isolation creating clean, quiet operation.
Browning® Classical Gripbelt® 1028489 BK Series Type 3 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 4.95 in OD, 4.4 in (A)/4.9 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028695 BK Series Type 3 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 5-3/4 in OD, 5.2 in (A)/5.7 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1027309 AK Series Type 3 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 8-3/4 in OD, 8.7 in (A)/8.16 in (3L) Dia Pitch, 3/4 in W Face
Browning® Gripbelt® 1059351 Type H1 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 3.35 in OD, 3.3 in Dia Pitch, 11/16 in W Face
Browning® Gripbelt® 1059963 Type 2 Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 4.12 in OD, 4.07 in Dia Pitch, 11/16 in W Face
Browning® Gripbelt® 1060383 Type 2 Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 5.6 in OD, 5.55 in Dia Pitch, 11/16 in W Face
Browning® Gripbelt® 1060722 Arm Type 16 Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 8 in OD, 7.95 in Dia Pitch, 11/16 in W Face
Browning® Classical Gripbelt® 3693801 B5V® Arm Type 2 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 13.88 in OD, 13.4 in (A)/13.9 in (B)/13.7 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3693827 B5V® Arm Type 2 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 16.28 in OD, 15.8 in (A)/16.3 in (B)/16.1 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3693637 B5V® Solid Type 1 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 5.48 in OD, 5 in (A)/5-1/2 in (B)/5.3 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3693645 B5V® Solid Type 1 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 5.68 in OD, 5.2 in (A)/5.7 in (B)/5-1/2 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 3693777 B5V® Arm Type 2 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 9.68 in OD, 9.2 in (A)/9.7 in (B)/9-1/2 in (BV) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 1028778 BK Series Type 3 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 5.95 in OD, 5.4 in (A)/5.9 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028216 BK Series Type 2 Single Groove Sheave, Finished Bore, 3/4 in Dia Bore, 3.95 in OD, 3.4 in (A)/3.9 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1042688 BK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 14-3/4 in OD, 14.2 in (A)/14.7 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1042415 BK Series Type 1 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 3-3/4 in OD, 3.2 in (A)/3.7 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1042431 BK Series Type 1 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 4-1/4 in OD, 3.7 in (A)/4.2 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1042530 BK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 6-3/4 in OD, 6.2 in (A)/6.7 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1002385 TB Series Arm Type 16 Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 8.35 in OD, 7.8 in (A)/8.3 in (B) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 1002443 TB Series Arm Type 16 Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 8.95 in OD, 8.4 in (A)/8.9 in (B) Dia Pitch, 1 in W Face
Browning® Classical Gripbelt® 1002567 TB Series Arm Type 16 Single Groove Sheave, Split Taper Bore, 1/2 to 1-3/4 in Dia Bore, 9-3/4 in OD, 9.2 in (A)/9.7 in (B) Dia Pitch, 1 in W Face
Recently Viewed
Klein Tools UY 22-26 AWG YEL IDC CONNECTOR KLE VDV-826-604
Klein's 25-pack of insulation displacement connectors are professional-grade and deliver consistent, reliable performance. Our thick 50-Micro-Inch gold plating on contacts prevent corrosion and extended connector life. The plug is housed in a durable resin. Expect a sure connection each and every time.
Westinghouse 7063400 Knurled Head Screw, For Use With Lighting Fixture, #8-32 Thread, Steel
The three brass plated steel knurled head screws offer strong brass plated steel and a common #8-32 thread suitable for a variety of lighting fixture repair projects. The screws in this set measure 3/4 in long. The knurled head adds texture for easier tightening. Their steel construction ensures that they are durable and dependable.
NIBCO 75-104-01 2-Piece Ball Valve, 3/4 in Nominal, FNPT End Style, Bronze Body, Standard Port, Domestic
This Apolloâ„¢ ball valve meets OSHA standards and provides for easy, safe maintenance of pneumatic tools. Valve can be padlocked in the open or closed position with the same hardware.
MORSE® 13138 1333 General Purpose Jobber Length Drill Bit, 12 mm Drill - Metric, 0.4724 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
1/4-B-P 1/4" -male Pipe Thread Metal Black Plug
1/4" -MALE PIPE THREAD METAL BLACK PLUG
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
