Browning® Classical Gripbelt® 1028778 BK Series Type 3 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 5.95 in OD, 5.4 in (A)/5.9 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028778 BK Series Type 3 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 5.95 in OD, 5.4 in (A)/5.9 in (B) Dia Pitch, 7/8 in W Face
-
BrandBrowning®
-
UPC662289218325
-
Manufacturer Part Number1028778
-
CountryUSA
-
Face Width7/8 in
-
Pitch Diameter5.4 in (A)/5.9 in (B)
-
MaterialCast Iron
-
TypeType 3
-
SeriesBK Series
-
Hub Projection13/32 in
-
Outside Diameter5.95 in
-
Bore Diameter1 in
-
Bore TypeFinished
-
Overall Length1-9/32 in
-
Suitable For Use With4L/A and 5L/B Cross Section Belt
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Combination Groove - All Browning BK Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Tighter tolerances by 25%
- Twice balanced after assembly
- Tightened micro-finish on groove walls for increased belt life
- Precision balanced to provide smooth, vibration free performance
- Largest Selection of finished bore sheaves of any other manufacturer - Browning offers finished bore sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Combination Groove - All Browning BK Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
-
Alternative Part NumberBK62X1
-
UNSPSC24101610
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® Classical Gripbelt® 1028778 BK Series Type 3 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 5.95 in OD, 5.4 in (A)/5.9 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1028778 BK Series Type 3 Single Groove Sheave, Finished Bore, 1 in Dia Bore, 5.95 in OD, 5.4 in (A)/5.9 in (B) Dia Pitch, 7/8 in W Face
Truflex® 4L460 Light Duty V-Belt, 4L Section, 1/2 in W Top, 46 in L Outside, 5/16 in THK
Gates® belts feature superior length stability for minimal take-up requirements.
John Guest® Speedfit® PEI0420 Coupler, 1/2 in Nominal, CTS End Style, Plastic, Domestic
Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.
John Guest® Speedfit® PEI0428 Coupler, 3/4 in Nominal, CTS End Style, Plastic, Domestic
Push-fit plastic fitting for the connection of plastic, copper, and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places, is approved for behind the wall installations, and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods.
Sharkbite® U514LF Pipe End Cap, 1/2 in Nominal, Push-Fit End Style, Brass, Import
SharkBite® End Caps are push-to-connect and are the easiest way to cap off your Copper, PEX, CPVC or PE-RT pipe lines. There is no soldering, clamps, unions or glue required. These fittings are great for stub outs and pressure testing a home as they take no time to cure. They are easily removed with a Disconnect Clip. All SharkBite® fittings are capable of being installed on either wet or dry pipe. This product is rated for up to 200 psi and 200 deg F.
John Guest® Speedfit® 3/4SCP Slip Connector, 3/4 in Nominal, CTS End Style, Plastic, Domestic
An innovative push-fit fitting which provides a quick and easy method of replacing burst or damaged pipe without the need to alter existing pipe work. See below for a step by step installation guide.
