BALL BEARINGS
6001-2-RS Deep Groove Ball Bearings Double Rubber Seal 12x28x8mm
DOUBLE SEALED BALL BEARING-GEN60012RS>
6002 SNR BEARINGS 15-MM-ID Open Face Ball Bearing
15-MM-ID OPEN-FACE BALL BEARINGS
6002-ZZ high-speed, single-row, deep-groove radial metric ball bearing featuring double metal shields on both sides.
• Bore Diameter (Inner Ring): 15 mm
• Outside Diameter: 32 mm
• Width: 9 mm
• Enclosure Type: Double Shielded (Metal shields on both sides, abbreviated as ZZ or 2Z)
• Lubrication: Factory pre-greased for life
• Max Speed: Approximately 24,000 to 28,000 RPM (depending on application limits)
6003-2-RS Radial/Deep Groove Ball Bearing - Straight Bore, 17 mm ID, 35 mm OD, 10 mm Width, Double Sealed, Without Snap Ring, C3 Internal Clearance
• Bore Diameter (Inner Ring): 17 mm
• Outside Diameter: 35 mm
• Width: 10 mm
• Enclosure Type: Double Sealed (Contact rubber seals on both sides, abbreviated as 2RS or 2RSH)
• Seal Material: Nitrile Butadiene Rubber (NBR)
• Lubrication: Factory pre-greased for maintenance-free operation
• Max Speed: Typically ranges from 12,000 to 19,000+ RPM under grease lubrication
6003-2-RS-NR Double Sealed Ball Bearing With Snap RIng
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL60032RSNR >
Recently Viewed
DOUBLED SEALED BALL BEARINGS-NSKR14VV>
Osborn 26160 Heavy Duty Wheel Brush With (2) 1/4 x 1/8 in Keyways, 15 in Dia Brush, 1/2 in W Face, 0.0118 in Dia Standard/Twist Knot Filament/Wire, 1-1/4 in Arbor Hole
1/2" X 2" M/D OVAL DIE SPRINGS-LANSMDO500200 >
3-BOLT TANGLE BEARING FLANGES (EA)-IBI52MSTRZP >
Made of high quality, low carbon, cold rolled, full hard, steel shim. Arbor shims have no keyways. Saves time over re-machining. Precision thicknesses for more accurate results. Packaged in airtight poly bag. Precision Brand® arbor shims are used for fast, accurate spacing of milling cutters, gang cutters, saws, slitting blades and grinding tools.
Weiler® 44099 Whisk Broom, Palmetto Bristle, 7 in L Trim
