BALL BEARINGS
DOUBLE ROW SHIELDED BALL BEARING-GUL53072Z >
DOUBLE ROW SHIELDED BALL BEARING-GUL53082Z >
DOUBLE ROW SHIELDED BALL BEARING-GUL53082ZNR >
DOUBLE ROW BALL BEARINGS-MRC5308M>
DOUBLE ROW BALL BEARING
DOUBLE ROW OPEN FACE BALL BEARING-NTN5309 >
DOUBLE ROW BALL BEARINGS
DOUBLE ROW SHIELDED BALL BEARING-GUL5309A2Z >
DOUBLE ROW SHIELDED BALL BEARING
Double Row Cylindrical Bore Angular Contact Ball Bearing
Item #100760687
Unmounted, Angular Contact Bearing
1.77 in Inner Diameter
3.94 in Outer Diameter
1.56 in Width
Bearing Steel Material
Double Row Cylindrical Bore Angular Contact Ball Bearing
Item #101169019
Unmounted, Angular Contact Bearing
1.77 in Inner Diameter
3.94 in Outer Diameter
1.56 in Width
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-GUL53102ZNR >
DOUBLE ROW SEALED BALL BEARING-GUL5310A2RS >
Double Row Angular Contact Bearing - 50 mm Bore, 110 mm OD, 1.7500 in Width, Double Shielded, With Snap Ring, 30 ° Contact Angle, C3
MI ITEM #00046530
MFR #5310MFFG
MRC (SKF) 5310MFF Double Row Angular Contact Bearing
DOUBLE ROW SEALED BALL BEARINGS-KOY53112RS>
DOUBLE ROW SHIELDED BALL BEARING-GUL53112Z >
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-GUL53112ZNR >
DOUBLE ROW SEALED BALL BEARING-GUL5311A2RS >
DOUBLE ROW OPEN FACE BALL BEARING-GUL5312 >
DOUBLE ROW SEALED BALL BEARING-KOY53122RS>
DOUBLE ROW BALL BEARING-NTN5314SC3 >
Type: Double-row angular contact ball bearing Bore Diameter: 80 mm (3.15 in) Outside Diameter: 170 mm Width: 68.3 mm (2.6875 in) Load Support: High radial and axial loads in both directions
DOUBLE ROW BALL BEARINGS-FAF5318WBR>
Recently Viewed
Sioux® tools offers one of the widest selections of drills on the market today. With free speeds from 550 to 2500 rpm we have the right drill for any application, for use with any type material. The gears are designed and built tough to handle demanding jobs, yet even under load, operate quietly and efficiently. Sioux® drills come in both reverse and non-reverse models.
ERB® 19912 Omega II® Full Brim Hard Hat, 6-1/2 Fits Mini Hat, 8 Fits Max Hat, HDPE, 6-Point Woven Nylon Suspension, ANSI Electrical Class Rating: Class C, E and G, ANSI Impact Rating: Type I, Ratchet Adjustment
DREMEL CLEANING BRUSH WITH 1/8" SHANK-JWH318000 >
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
MINI T-STRAINER EPDM GASKET
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
