BALL BEARINGS
5309-A-2-Z Double Row Shielded Ball Bearing
DOUBLE ROW SHIELDED BALL BEARING-GUL5309A2Z >
5309-C-FF-G • Bore Diameter (ID): 45 mm (1.7717 in) • Outside Diameter (OD): 100 mm (3.9370 in) • Width: 39.69 mm (1.5626 in) • Contact Angle: 30° • Dynamic Radial Load Capacity: 72,800 N (16,400 lbf) • Static Radial Load Capacity: 53,000 N (11,900 lbf) •
DOUBLE ROW SHIELDED BALL BEARING
5309-M Double Row Ball Bearing • Bore (ID): 45 mm (1.7717 in) • Outside Diameter (OD): 100 mm (3.9370 in) • Width: 39.69 mm (1.5626 in) • Design: Maximum-capacity filling slot (optimized for high radial and two-directional thrust loads). • Configuration:
Double Row Cylindrical Bore Angular Contact Ball Bearing
Item #100760687
Unmounted, Angular Contact Bearing
1.77 in Inner Diameter
3.94 in Outer Diameter
1.56 in Width
Bearing Steel Material
5309-M-FF-G It expands directly on the 5309MFF model you asked about previously by adding an outer ring locating snap ring. It belongs to the 5300-M Medium Series and features a maximum-capacity filling slot design optimized to handle heavy radial loads,
Double Row Cylindrical Bore Angular Contact Ball Bearing
Item #101169019
Unmounted, Angular Contact Bearing
1.77 in Inner Diameter
3.94 in Outer Diameter
1.56 in Width
5310-2-Z-NR DOUBLE SHIELDED BALL BEARINGS WSR
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-GUL53102ZNR >
5311-2-Z Double Row Shielded Ball Bearings WSR
DOUBLE ROW SHIELDED BALL BEARING-GUL53112Z >
5311-2-Z-NR DOUBLE SHIELDED BALL BEARINGS WSR
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-GUL53112ZNR >
5311-A-2-RS Double Row Sealed Ball Bearing
DOUBLE ROW SEALED BALL BEARING-GUL5311A2RS >
5312 Double Row Open Face Ball Bearing
DOUBLE ROW OPEN FACE BALL BEARING-GUL5312 >
5316-H Double Row Bearing
Type: Double-row angular contact ball bearing Bore Diameter: 80 mm (3.15 in) Outside Diameter: 170 mm Width: 68.3 mm (2.6875 in) Load Support: High radial and axial loads in both directions
55502 Double Row Shielded industrial-grade double-row angular contact radial ball bearing.
DOUBLE ROW SHIELDED BALL BEARINGS-GEN55502>
55502 NEW DEPARTURE BEARINGS vintage double-row angular contact ball bearing.
• Bore Diameter: 15 mm (0.5906 in)
• Outer Diameter (OD): 35 mm (1.3780 in)
• Width: 15.88 mm (0.6250 in)
Industry Interchanges & Replacement
55504 Double Row Shielded industrial-grade double-row angular contact radial ball bearing
DOUBLE ROW SHIELDED BALL BEARINGS-GEN55504>
Recently Viewed
3/4" X 5" MD/HD OVAL DIE SPRINGS-LANSMHO750500 >
2" FINE/BLUE CONDITIONING DISC-PEANW2FQ >
MORSE® 13014 1333 General Purpose Jobber Length Drill Bit, 1 mm Drill - Metric, 0.0394 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
2-3/16" -ID QUICK DISCONNECT SK-STYLE BUSHING
Dichtomatik 75102234 O-Ring, 336 Dash Number, 2.85 in ID x 3.27 in OD, FKM, 75 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Amboreâ„¢ 12089 1384 Heavy Duty Jobber Length Drill Bit, 31/64 in Drill - Fraction, 0.4844 in Drill - Decimal Inch, 135 deg Point, HSS, Black/Gold Oxide
