BALL BEARINGS

THRUST BALL BEARING-NTN51105 >

THRUST BALL BEARING-GUL51106 >

THRUST BALL BEARING-GUL51107 >

THRUST BALL BEARING-NTN51107 >

THRUST BALL BEARING-GUL51108 >

40-Mm-ID THRUST BALL BEARINGS

• Bore Diameter (Inner Shaft Washer d): 45 mm (1.7717 in)
• Outside Diameter (Housing Washer D): 65 mm (2.5591 in)
• Overall Height/Width (T): 14 mm (0.5512 in)
• Component Composition: Separable 3-piece kit consisting of:
• 1x Shaft Washer: (Tight bore tolerance to grip the rotating shaft)
• 1x Housing Washer: (Slightly larger clearance bore to sit loosely/stationary in the housing)
• 1x Pressed Steel Ball & Cage Assembly
• Basic Dynamic Load Rating (\(C_{a}\)): ~27,900 N to 34,800 N
• Basic Static Load Rating (\(C_{0a}\)): ~69,100 N
• Limiting Speed (Grease): 3,200 RPM
• Limiting Speed (Oil): 5,000 RPM

THRUST BALL BEARING-NTN51110 >

170-MM-ID THRUST BALL BEARINGS-NTN51134>

THRUST BALL BEARING -NTN51201 >

THRUST BALL BEARING -GUL51201 >

3-PC THRUST BALL BEARINGS-SKF51204>

THRUST BALL BEARING-NTN51205 >

THRUST BALL BEARING-NTN51206 >

THRUST BALL BEARING-NTN51210 >

THRUST BEARING-FAG51212>

THRUST BALL BEARING-GUL51312 >

DOUBLE ROW SEALED BALL BEARING-GUL52002RS >

DOUBLE ROW SHIELDED BALL BEARING-GUL52002Z >

MRC 5200SBKF double row angular contact ball bearing with 10mm bore and 1.181" O.D. Single shielded enclosure and metal cage. Suitable for radial and axial load applications. Drop-in SKF replacement for industrial machinery.

Double Row Angular Contact Bearing - 10 mm Bore, 30 mm OD, 0.5625 in Width, Double Shielded, Without Snap Ring, 30 ° Contact Angle

DOUBLE ROW SEALED BALL BEARING-GUL52012RS >

DOUBLE ROW SHIELDED BALL BEARING-GUL52012Z >

The MRC 5201SBKFF is a double-row angular contact ball bearing. Designed for high heavy-duty precision, it is widely utilized in mechanical power transmission and industrial motion control applications. Key Specifications Bore Diameter: 12 mm Outside Diameter (OD): 32 mm Width: 15.88 mm (0.625 inches) Contact Angle: 30 degrees