BALL BEARINGS
35-MM-ID MAST GUIDE BALL BEARING-GUL307SZZ10 >
BALL BEARING-BCA308>
DOUBLE OPEN FACE BALL BEARINGS-FAF308K>
SINGLE SHIELDED BALL BEARINGS-FAF308KD>
DOUBLE SHIELDED BALL BEARINGS-FAF308KDD>
DOUBLE OPEN FACE BALL BEARINGS-FAF309K>
SINGLE ROW BALL BEARING
DOUBLE OPEN FACE BALL BEARINGS-FAF309W>
DOUBLE SHIELDED BALL BEARINGS
BALL BEARINGS-FAF310KDDN>
Dimensions
Bore diameter1.9685 in
Outside diameter4.3307 in
Width1.063 in
Bore Diameter: 50 mm Outside Diameter: 110 mm Width: 27 mm Radial Internal Clearance: ABMA C3Max RPM: 7500Weight: 2.6 lbs
Image may differ from product. See technical specification for details.
MRC.310S
Deep groove ball bearing
Single row deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They can accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
Simple, versatile and robust design
Low friction
High-speed capability
Accommodate radial and axial loads in both directions
Require little maintenance
Deep groove ball bearing
Single row deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They can accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
Simple, versatile and robust design
Low friction
High-speed capability
Accommodate radial and axial loads in both directions
Require little maintenance
DOUBLE SEALED BALL BEARINGS-FAF312NPP>
Single row deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They can accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
Simple, versatile and robust design
Low friction
High-speed capability
Accommodate radial and axial loads in both directions
Require little maintenance
DOUBLE OPEN FACE BALL BEARINGS-FAF314W>
Cylindrical Bore Deep Groove Ball Bearing
Item #101174681
Deep Groove Bearing
2.95 in Inner Diameter
6.3 in Outer Diameter
1.46 in Width
Bearing Steel Material
DOUBLE OPEN FACE BALL BEARINGS-FAF316K>
DOUBLE OPEN FACE BALL BEARINGS-FAF317K>
FLANGED BALL BEARINGS-GEN3170401>
DOUBLE SHIELDED BALL BEARINGS-FAF318KDD>
3/8"-ID FLANGED BALL BEARING-GEN3200401>
FLANGED BALL BEARING-GEN3201801>
Recently Viewed
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Koyo NA4905 Metric Series Caged Round Bore Needle Roller Bearing With Inner Ring, 25 mm Dia Bore, 42 mm OD, 1 Row, 17 mm W, 24.3 kN Dynamic/31.7 kN Static Load
Heavy duty Needle Roller Bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
5-TON TROLLEY-JET252050 >
Klein® 79212 Hex Key, T-Handle Handle, Steel
Wilton® Brute Force™ 27207 Bridge/Boiler Short Spindle C-Clamp, 3-1/8 in D Throat, 2-1/4 to 5-1/2 in Jaw Opening, 7/8 in Screw
Wilton® Brute Force™ 27207 Bridge/Boiler Short Spindle C-Clamp, 3-1/8 in D Throat, 2-1/4 to 5-1/2 in Jaw Opening, 7/8 in Screw
Klein® Cushion-Grip® 600-4 Heavy Duty Screwdriver, 1/4 in Slotted Point, Steel Shank, 8-11/32 in OAL, Acetate Handle, Polished Chrome, ANSI/ASME Specified
Klein Tools Keystone-Tip Screwdrivers are designed for demanding applications. The precision machined tip provides an exact fit. Durable Cushion-Grip™ handles are designed for comfort and added torque.
