BALL BEARINGS
310-M-FF Single Row Ball Bearing
Dimensions
Bore diameter1.9685 in
Outside diameter4.3307 in
Width1.063 in
310-R MRC BALL BEARINGS
Bore Diameter: 50 mm Outside Diameter: 110 mm Width: 27 mm Radial Internal Clearance: ABMA C3Max RPM: 7500Weight: 2.6 lbs
310-S DOUBLE OPEN FACE BALL BEARINGS
Image may differ from product. See technical specification for details.
MRC.310S
Deep groove ball bearing
Single row deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They can accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
Simple, versatile and robust design
Low friction
High-speed capability
Accommodate radial and axial loads in both directions
Require little maintenance
310-S-FFDOUBLE SHIELDED BALL BEARINGS
Deep groove ball bearing
Single row deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They can accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
Simple, versatile and robust design
Low friction
High-speed capability
Accommodate radial and axial loads in both directions
Require little maintenance
312-SZZ Single Row Ball Bearing
Single row deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They can accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types.
Simple, versatile and robust design
Low friction
High-speed capability
Accommodate radial and axial loads in both directions
Require little maintenance
315-M MRC BALL BEARINGS
Cylindrical Bore Deep Groove Ball Bearing
Item #101174681
Deep Groove Bearing
2.95 in Inner Diameter
6.3 in Outer Diameter
1.46 in Width
Bearing Steel Material
Recently Viewed
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL62072RSNR >
1/2-TON HAND CHAIN HOISTS-HRHCF00510>
Bore Diameter (Inner ID): 30 mm Outside Diameter (OD): 55 mm Width: 13 mm Weight: Approximately 0.12 kg (0.28 lbs.)
NICE COMMERCIAL BALL BEARING-GUL5327V >
JASON 800-8-M-50 HTB PROFILE TIMING BELT, 800-MM PITCH LENGTH, 8-MM TOOTH PITCH, 50-MM WIDTH, 8-MM TOOTH, 100 TEETH.
TIMING BELT, SYNCHRONOUS BELT, FIBERGLASS TENSILE CORD, OIL, HEAT AND OZONE RESISTANCE; HIGH TOOTH SHEAR RESISTANCE. NYLON TOOTH COVER
-JAS8008M30 >
THRUST BALL BEARING-GUL51106 >
