BALL BEARINGS
DOUBLE SHIELDED BALL BEARINGS-GEN2221077>
DOUBLE SEALED BALL BEARINGS-GEN2221088>
DOUBLE SHIELDED BALL BEARINGS-GEN2261077>
DOUBLE SEALED BALL BEARINGS-GEN2261088>
DOUBLE SEALED BALL BEARINGS-GEN2261288>
BALL BEARINGGEN2261801>
DOUBLE SHIELDED BALL BEARINGS -GEN2281077 >
DOUBLE SEALED BALL BEARINGS -GEN2281088 >
DOUBLE SEALED BALL BEARINGS-GEN2281288>
DOUBLE SEALED BALL BEARINGS-GEN2281288>
STR-ID SELF ALIGNING BALL BEARINGS-SNR2305>
STR-ID SELF ALIGNING BALL BEARINGS-SNR2305EE>
SELF-ALIGNING BALL BEARING-NTN2307 >
STR-ID SELF ALIGNING BALL BEARINGS-SNR2307>
STRAIGHT-ID SELF-ALIGNING BALL BEARING-GUL2307 >
STR-ID SELF ALIGNING BALL BEARINGS-SNR2308>
STR-ID SELF ALIGNING BALL BEARINGS-SNR2310>
STRAIGHT-ID SELF-ALIGNING BALL BEARING-GUL2310 >
STR-ID SELF ALIGNING BALL BEARINGS-SNR2310EE>
TPR-ID SELF-ALIGNING BALL BEARING-GUL2311K >
SELF-ALIGNING BALL BEARING-GUL2312M >
SELF-ALIGNING BALL BEARING-GUL2314 >
DOUBLE SHIELDED BALL BEARINGS-GEN2321277>
DOUBLE SEALED BALL BEARINGS-GEN2321288>
Recently Viewed
1" STAINLESS STEEL FULL PORT LOCK BALL VALVE-DXNSSLBV100 >
RIDGID® 37400 12-R Hand Threader Die Head, 1 in Nominal, NPT Thread, Right Thread, Alloy Steel Die, For Use With Ridgid® 12-R Manual Pipe Threaders
RIDGID® 37400 12-R Hand Threader Die Head, 1 in Nominal, NPT Thread, Right Thread, Alloy Steel Die, For Use With Ridgid® 12-R Manual Pipe Threaders
Reed 05380 Universal Die Head, 1/8 to 2 in Nominal, Quick-Opening Die Head Opening, NPT/NPSM/BSPT Thread
R811 Universal Die Head uses universal dies from REED, Ridgid®, Wheeler-Rex®, Berkley and some private brands. R811 fits REED's 5301PD Power Drive and RIDGID® machine models 300, 535 and 1822. The R811 universal die head offers easy-to-adjust size selection with manual open/close operation, along with die lubrication slots. R811 does not include universal dies, order them separately. The R811 die head holds any NPT, NPSM, BSPT, or Bevel-type REED Universal Dies. Geared Threading Dies: The R65 die is made for easier work with larger pipe and in remote locations. It fits Ridgid® brand 65 geared heads. Like other REED chasers, the R65 is backed by REED's 120+ years of die-making experience, and is made in the USA.
2" -FEMALE PIPE THREAD STAINLESS STEEL LOCKING BALL VALVE-DXNSSLBV200SP >
Reed 93200 Wheel Pin, For Use With: Rotaryâ„¢ Pipe Cutter
The wheel pin is universal to all REED LCRC and RC cutters. It is used to hold the wheel in place and allows for easy change of wheels, whether from old to new, or from wheels for steel to wheels for cast/ductile iron, which gives these cutters their useful versatility. (Note: the RC36S and RC42S cutters are only for steel.) REED strongly recommends changing all four cutter wheels simultaneously for optimum cutter performance. The 93220 outboard roller is for use with all cutter wheels except the RCX wheel. Each cutter wheel requires two outboard rollers for a total of eight per cutter. The 93222 outboard roller is a specially designed roller for use with the RCX wheel only. When using RCX wheels, it is critical to change the outboard rollers from 93220 and use only the 93222 roller. The RCX wheels are designed to cut thicker-walled pipe, and the 93222 roller has a smaller diameter, which allows the longer profile of the RCX wheel to penetrate steel or stainless pipe wall up to 0.8 inches (20.3 mm). As with all LCRC or RC cutters, a total of eight outboard rollers is required per cutter. To cut only thicker-walled steel or stainless steel pipe, order cutters with the "X" designation (such as LCRC8X), because these come automatically equipped with the RCX wheels and 93222 rollers.
CHECK VALVE-NIBT480Y3/4>
