BALL BEARINGS
22618-01 GENERAL BEARING Radial/Deep Groove Ball Bearing - Straight Bore, 0.7500 in ID, 1.6250 in OD, 0.6250 in Width, Open, Without Snap Ring
BALL BEARINGGEN2261801>
22810-77 Double Shielded Ball Bearings
DOUBLE SHIELDED BALL BEARINGS -GEN2281077 >
22812-77Radial/Deep Groove Ball Bearing - Straight Bore, 0.7500 in ID, 1.7500 in OD, 0.5000 in Width, Double Shielded, Without Snap Ring
DOUBLE SEALED BALL BEARINGS-GEN2281288>
22812-88 Radial/Deep Groove Ball Bearing - Straight Bore, 0.7500 in ID, 1.7500 in OD, 0.5000 in Width, Double Sealed, Without Snap Ring
DOUBLE SEALED BALL BEARINGS-GEN2281288>
2305-EE SNR Bearing Str-ID Self-Aligning Ball Bearing
STR-ID SELF ALIGNING BALL BEARINGS
2307 Straight-ID Self-aligning Ball Bearing
STRAIGHT-ID SELF-ALIGNING BALL BEARING-GUL2307 >
2310 Straight-ID Self-aligning Ball Bearing
STRAIGHT-ID SELF-ALIGNING BALL BEARING-GUL2310 >
2310-EE Str-ID Self Aligning Ball Bearing
STR-ID SELF ALIGNING BALL BEARINGS-SNR2310EE>
2311-K Tpr-ID Self-aligning Ball Bearing
TPR-ID SELF-ALIGNING BALL BEARING-GUL2311K >
23212-77Radial/Deep Groove Ball Bearing - Straight Bore, 0.7500 in ID, 2.0000 in OD, 0.5625 in Width, Double Shielded, Without Snap Ring
DOUBLE SHIELDED BALL BEARINGS-GEN2321277>
23212-88 Radial/Deep Groove Ball Bearing - Straight Bore, 0.7500 in ID, 2.0000 in OD, 0.5625 in Width, Double Sealed, Without Snap Ring
DOUBLE SEALED BALL BEARINGS-GEN2321288>
23214-77 single-row radial deep groove ball bearing.
• Bore Diameter (ID): 0.8750 inches (7/8 in)
• Outside Diameter (OD): 2.0000 inches (2 in)
• Width: 0.5625 inches (9/16 in)
• Bore Type: Straight
• Closure Type: Double Shielded (denoted by the "-77" suffix, utilizing two metal shields to block larger dust particles while retaining factory grease)
23216-88 single-row radial deep groove ball bearing
• Bore Diameter (ID): 1.0000 inch
• Outside Diameter (OD): 2.0000 inches
• Width: 0.5625 inches (9/16 in)
• Bore Type: Straight
• Closure Type: Double Sealed (rubber seals on both sides to retain grease and keep out contaminants)
• Cage Material: Steel
• Maximum Speed: 5,000 RPM
24120-77Radial/Deep Groove Ball Bearing - Straight Bore, 1.2500 in ID, 2.5625 in OD, 0.6875 in Width, Double Shielded, Without Snap Ring
DOUBLE SHIELDED BALL BEARINGS-GEN2412077>
24121-88 Radial/Deep Groove Ball Bearing - Straight Bore, 1.3125 in ID, 2.5625 in OD, 0.6875 in Width, Double Sealed, Without Snap Ring
DOUBLE SEALED BALL BEARINGS-GEN2412188>
3-L-15 a vintage extra-light duty, single-row deep groove radial ball bearing.
The New Departure 3L15 is a vintage, single-row deep groove ball bearing. It serves as a direct cross-reference to the industry-standard 6015 bearing. Dimensional Specifications Bore (Inner Diameter): 75 mm Outer Diameter: 115 mm Width: 20 mm
3-MM-205-WI-DUL Pair Precision Thrust
PAIR PRECISION THRUST BALL BEARING-FAF3MM205WIDUL>
Recently Viewed
TR-7-N SEALMASTER Precision Right Hand Thread 3 pc Greasable Carbon Steel Race Female Rod End
Precision Grade
Grease Lubrication Type
Right Hand Thread Direction
3/4" -FEMALE PIPE THREAD METAL BLACK UNIONS-JPW3/4BU >
JAS480-M25>
STAINLESS STEEL BALL BEARING-IDCSSR102RS >
20 TOOTH H-PITCH H-BUSH TIMING BELT SHEAVES-BRW20HH150 >
ASP-162-2-S Industry Standard Clamping Collar, 2-Piece Construction, 1-5/8 in ID x 2-5/8 in OD x 11/16 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
