6003-2-RS Radial/Deep Groove Ball Bearing - Straight Bore, 17 mm ID, 35 mm OD, 10 mm Width, Double Sealed, Without Snap Ring, C3 Internal Clearance
• Bore Diameter (Inner Ring): 17 mm
• Outside Diameter: 35 mm
• Width: 10 mm
• Enclosure Type: Double Sealed (Contact rubber seals on both sides, abbreviated as 2RS or 2RSH)
• Seal Material: Nitrile Butadiene Rubber (NBR)
• Lubrication: Factory pre-greased for maintenance-free operation
• Max Speed: Typically ranges from 12,000 to 19,000+ RPM under grease lubrication
Recently Viewed
6003-2-RS Radial/Deep Groove Ball Bearing - Straight Bore, 17 mm ID, 35 mm OD, 10 mm Width, Double Sealed, Without Snap Ring, C3 Internal Clearance
• Bore Diameter (Inner Ring): 17 mm
• Outside Diameter: 35 mm
• Width: 10 mm
• Enclosure Type: Double Sealed (Contact rubber seals on both sides, abbreviated as 2RS or 2RSH)
• Seal Material: Nitrile Butadiene Rubber (NBR)
• Lubrication: Factory pre-greased for maintenance-free operation
• Max Speed: Typically ranges from 12,000 to 19,000+ RPM under grease lubrication
