BALL BEARINGS
Bore Diameter: 55 mm Outer Diameter: 90 mm Width / Thickness: 18 mm Sealing: Rubber contact seals (2RS/2RS1) on both sides to keep dust out and grease in Max Speed: Up to 4,500 RPM (limiting speed) Temperature Range: -20 °C to +120 °C (-4 °F to +248 °F)
DOUBLE SEALED BALL BEARING WITH SNAP RING - GUL60112RSNR>
DOUBLE SHIELDED BALL BEARING-GUL60112Z >
DOUBLE SEALED BALL BEARINGS-SNR6011EE>
DOUBLE SEALED BALL BEARING-NTN6011LL >
DOUBLE SHIELDED BALL BEARING-NTN6011ZZ >
60-MM X 95-MM X 16-MM DOUBLE SEALED BALL BEARINGS -GUL60122RS >
• Inside Diameter (Bore): 60 mm (2.362 inches)
• Outside Diameter (OD): 95 mm (3.740 inches)
• Width: 18 mm (0.709 inches)
• Max Speed: ~4,500 to 5,300 RPM (depending on internal grease parameters)
• Material: Premium chrome steel (SAE-52100)
60-MM X 95-MM X 16-MM DOUBLE SEALED BALL BEARINGS WSR -GUL60122RSNR >
DOUBLE SEALED BALL BEARINGS-SNR6012EE>
60-MM X 95-MM X 18-MM DOUBLE SEALED BALL BEARINGS -NTN6012LL >
BALL BEARINGS-NSK6012RZZ>
DOUBLE SEALED BALL BEARING-GUL60132RS >
DOUBLE SHIELDED BALL BEARING-GUL60132Z >
BALL BEARING-FAG6013A>
DOUBLE SEALED BALL BEARINGS
DOUBLE SEALED BALL BEARING-NTN6013LL >
6013-ZZ a standard extra-light duty, single-row deep groove precision radial ball bearing equipped with non-contact metal shields on both sides.
• Inside Diameter (Bore): 65 mm (2.559 inches)
• Outside Diameter (OD): 100 mm (3.937 inches)
• Width: 18 mm (0.709 inches)
• Max Speed: Up to 7,500 RPM (lubricated with grease)
DOUBLE SEALED RADIAL BALL BEARING -GUL60142RS >
DOUBLE SEALED BALL BEARINGS WSR -GUL60142RSNR >
DOUBLE SHIELDED BALL BEARINGS -GUL60142Z >
DOUBLE SEALED RADIAL BALL BEARING -NTN6014LL >
DOUBLE SEALED BALL BEARING - SKF60152RS>
DOUBLED SEALED BALL BEARING-GUL60152RS >
Recently Viewed
32-RIB POLY-V V-BELT -JAS765L32 >
1" -ID 1615-STYLE TAPER-LOCK BUSHING-BRW1615X1 >
#160 RIVETED ROLLER CHAIN(FT)-ROL160RIV >
2-GRV A OR B-BELT SH-BUSH SHEAVES
Square Dâ„¢ B150 Type B Rainproof Hub, 1-1/2 in, For Use With QOâ„¢/Homelineâ„¢ NEMA 3R Load Center, Safety Switch and RB Devices
Industrial Circuit Breaker Enclosures are designed to be tough, reliable and provide exceptional performance in the most grueling conditions. Provides a dead front housing for circuit breakers, molded case switches, and motor circuit protectors to prevent personnel from accidentally contacting energized parts. Designed to meet or exceed UL 50 requirements for specific environmental conditions. Allow breaker operation without removing cover. These units are UL Listed and CSA Certified. Square D equipment with “R’’ or “RB’’ suffix, designated NEMA 3R rainproof construction, utilizes bolt-on hubs listed below. “RB’’ devices will accept 3/4 in. through 2- 1/2 in. bolt-on hubs without the use of reducers. Off-center conduit thread openings and elongated mounting holes provide quick and easy adjustment to eliminate costly conduit offsets and bends. Load Center Hub, 1.50 in, rainproof, for RB devices is a conduit entry, and is used for conduit installation. This bolt-on accessory has a UL listed rating. The dimensions are 1.38 mm(H)4.44 mm(W)3.09 mm(D). This product comes with an 18 month warranty.
FHP V-BELT 58."-JAS4L580 >
