BALL BEARINGS
6011-2-RS Double Sealed Bearing
Bore Diameter: 55 mm Outer Diameter: 90 mm Width / Thickness: 18 mm Sealing: Rubber contact seals (2RS/2RS1) on both sides to keep dust out and grease in Max Speed: Up to 4,500 RPM (limiting speed) Temperature Range: -20 °C to +120 °C (-4 °F to +248 °F)
6011-2-RS-NR Double Sealed Ball Bearing With Snap Ring
DOUBLE SEALED BALL BEARING WITH SNAP RING - GUL60112RSNR>
6012-2-RS 60-mm X 95-mm X 16-mm Double Sealed Ball Bearings
60-MM X 95-MM X 16-MM DOUBLE SEALED BALL BEARINGS -GUL60122RS >
6012-2-RS a standard extra-light duty, single-row deep groove radial ball bearing equipped with rubber contact seals on both sides.
• Inside Diameter (Bore): 60 mm (2.362 inches)
• Outside Diameter (OD): 95 mm (3.740 inches)
• Width: 18 mm (0.709 inches)
• Max Speed: ~4,500 to 5,300 RPM (depending on internal grease parameters)
• Material: Premium chrome steel (SAE-52100)
6012-2-RS-NR 60-mm X 95-mm X 16-mm Double Sealed Ball Bearings
60-MM X 95-MM X 16-MM DOUBLE SEALED BALL BEARINGS WSR -GUL60122RSNR >
6012-LL 60-mm X 95-mm X 18-mm Double Sealed Ball Bearings
60-MM X 95-MM X 18-MM DOUBLE SEALED BALL BEARINGS -NTN6012LL >
6013-ZZ a standard extra-light duty, single-row deep groove precision radial ball bearing equipped with non-contact metal shields on both sides.
• Inside Diameter (Bore): 65 mm (2.559 inches)
• Outside Diameter (OD): 100 mm (3.937 inches)
• Width: 18 mm (0.709 inches)
• Max Speed: Up to 7,500 RPM (lubricated with grease)
6014-2-RS Double Sealed Radial Ball Bearing
DOUBLE SEALED RADIAL BALL BEARING -GUL60142RS >
6014-2-RS-NR Double Sealed Ball Bearings
DOUBLE SEALED BALL BEARINGS WSR -GUL60142RSNR >
6014-2-Z Double Shielded Ball Bearings
DOUBLE SHIELDED BALL BEARINGS -GUL60142Z >
6014-LL Double Sealed Radial Ball Bearing
DOUBLE SEALED RADIAL BALL BEARING -NTN6014LL >
Recently Viewed
SINGLE GROOVE CAST IRON SHEAVE WITH 1" - ID-BRWAL84X1 >
Dodge® 117093 Stock Bore Taper Lock Bushing, 1-11/16 in Dia Bore, 2-3/4 in Dia Barrel, 1-1/4 in OAL, Sintered Steel
Dodge® Taper-Lock® bushings are flangeless for clean, compact application. They are engineered with an 8 deg taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble.
OIL SEALS-1.875" X 2.813" X .500"-IMS18708>
DOUBLE SHIELDED BALL BEARING WITH SNAP RING-NTN6206ZZNR >
Weiler® 00274 TLN-3 Narrow Face Wheel Brush, 3 in Dia Brush, 7/16 in W Face, 0.014 in Dia Filament/Wire Crimped Filament/Wire, 3/8 to 1/2 in Arbor Hole
Weiler® 00274 TLN-3 Narrow Face Wheel Brush, 3 in Dia Brush, 7/16 in W Face, 0.014 in Dia Filament/Wire Crimped Filament/Wire, 1/2 to 3/8 in Arbor Hole
BEARING-GUL6242Z >
