BALL BEARINGS
Bore Diameter: 55 mm Outer Diameter: 90 mm Width / Thickness: 18 mm Sealing: Rubber contact seals (2RS/2RS1) on both sides to keep dust out and grease in Max Speed: Up to 4,500 RPM (limiting speed) Temperature Range: -20 °C to +120 °C (-4 °F to +248 °F)
DOUBLE SEALED BALL BEARING WITH SNAP RING - GUL60112RSNR>
DOUBLE SHIELDED BALL BEARING-GUL60112Z >
DOUBLE SEALED BALL BEARINGS-SNR6011EE>
DOUBLE SEALED BALL BEARING-NTN6011LL >
DOUBLE SHIELDED BALL BEARING-NTN6011ZZ >
60-MM X 95-MM X 16-MM DOUBLE SEALED BALL BEARINGS -GUL60122RS >
• Inside Diameter (Bore): 60 mm (2.362 inches)
• Outside Diameter (OD): 95 mm (3.740 inches)
• Width: 18 mm (0.709 inches)
• Max Speed: ~4,500 to 5,300 RPM (depending on internal grease parameters)
• Material: Premium chrome steel (SAE-52100)
60-MM X 95-MM X 16-MM DOUBLE SEALED BALL BEARINGS WSR -GUL60122RSNR >
DOUBLE SEALED BALL BEARINGS-SNR6012EE>
60-MM X 95-MM X 18-MM DOUBLE SEALED BALL BEARINGS -NTN6012LL >
BALL BEARINGS-NSK6012RZZ>
DOUBLE SEALED BALL BEARING-GUL60132RS >
DOUBLE SHIELDED BALL BEARING-GUL60132Z >
BALL BEARING-FAG6013A>
DOUBLE SEALED BALL BEARINGS
DOUBLE SEALED BALL BEARING-NTN6013LL >
6013-ZZ a standard extra-light duty, single-row deep groove precision radial ball bearing equipped with non-contact metal shields on both sides.
• Inside Diameter (Bore): 65 mm (2.559 inches)
• Outside Diameter (OD): 100 mm (3.937 inches)
• Width: 18 mm (0.709 inches)
• Max Speed: Up to 7,500 RPM (lubricated with grease)
DOUBLE SEALED RADIAL BALL BEARING -GUL60142RS >
DOUBLE SEALED BALL BEARINGS WSR -GUL60142RSNR >
DOUBLE SHIELDED BALL BEARINGS -GUL60142Z >
DOUBLE SEALED RADIAL BALL BEARING -NTN6014LL >
DOUBLE SEALED BALL BEARING - SKF60152RS>
DOUBLED SEALED BALL BEARING-GUL60152RS >
Recently Viewed
IKO designs and manufactures a broad selection of Cam Followers to meet the diverse needs of applications including machine tools, industrial robots, electronic parts production and office automation equipment. A Cam Follower is a bearing that incorporates needle style rollers between a stud and a thick outer ring.
IKO designs and manufactures a broad selection of Cam Followers to meet the diverse needs of applications including machine tools, industrial robots, electronic parts production and office automation equipment. A Cam Follower is a bearing that incorporates needle style rollers between a stud and a thick outer ring.
Smith Bearing® HR-1-1/8-XB Cylindrical Stud Type Needle Bearing Cam Follower, 1-1/8 in Dia x 5/8 in W Roller, 5/8 in Dia x 1 in L Stud, 52100 Steel Roller
The HR Series have a larger diameter stud and are recommended for applications with high running loads and/or heavy shocks where deflection should be held to a minimum. Rollers and outer races are identical to the standard CR Series. Manufactured from high alloy bearing quality steel.
United Abrasives-SAIT 72030 2A Premium Coated Flap Wheel, 6 in Dia, 2 in W Face, 60 Grit, Coarse Grade, Aluminum Oxide Abrasive
IKO designs and manufactures a broad selection of Cam Followers to meet the diverse needs of applications including machine tools, industrial robots, electronic parts production and office automation equipment. A Cam Follower is a bearing that incorporates needle style rollers between a stud and a thick outer ring.
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.
