BALL BEARINGS
DOUBLE SEALED BALL BEARING-GUL60002RS >
DOUBLE SHIELDED BALL BEARING-GUL60002Z >
DOUBLE SEALED BALL BEARINGS
DOUBLE SEALED BALL BEARING-NTN6000LL >
DOUBLE SHIELDED BALL BEARING-NTN6000ZZ >
DOUBLE SHIELDED BALL BEARING
DOUBLE SEALED BALL BEARING-GEN60012RS>
DOUBLE SEALED BALL BEARING-GUL60012RS >
DOUBLE SHIELDED BALL BEARING-GUL60012Z >
DOUBLE SEALED BALL BEARINGS
DOUBLE SEALED BALL BEARING-NTN6001LL >
DOUBLE SHIELDED BALL BEARING-NTN6001ZZ >
DOUBLE SHIELDED BALL BEARINGS
15-MM-ID OPEN-FACE BALL BEARINGS
DOUBLE SEALED BALL BEARINGS WSR
DOUBLE SEALED BALL BEARING-GUL60022RS >
DOUBLE SHIELDED BALL BEARING-GUL60022Z >
DOUBLE SEALED BALL BEARING
DOUBLE SEALED BALL BEARING-NTN6002LL >
DOUBLE SHIELDED BALL BEARING-NTN6002ZZ >
6002-ZZ high-speed, single-row, deep-groove radial metric ball bearing featuring double metal shields on both sides.
• Bore Diameter (Inner Ring): 15 mm
• Outside Diameter: 32 mm
• Width: 9 mm
• Enclosure Type: Double Shielded (Metal shields on both sides, abbreviated as ZZ or 2Z)
• Lubrication: Factory pre-greased for life
• Max Speed: Approximately 24,000 to 28,000 RPM (depending on application limits)
DOUBLE SEALED BALL BEARING-GUL60032RS >
6003-2-RS Radial/Deep Groove Ball Bearing - Straight Bore, 17 mm ID, 35 mm OD, 10 mm Width, Double Sealed, Without Snap Ring, C3 Internal Clearance
• Bore Diameter (Inner Ring): 17 mm
• Outside Diameter: 35 mm
• Width: 10 mm
• Enclosure Type: Double Sealed (Contact rubber seals on both sides, abbreviated as 2RS or 2RSH)
• Seal Material: Nitrile Butadiene Rubber (NBR)
• Lubrication: Factory pre-greased for maintenance-free operation
• Max Speed: Typically ranges from 12,000 to 19,000+ RPM under grease lubrication
DOUBLE SEALED BALL BEARING WITH SNAP RING-GUL60032RSNR >
Recently Viewed
Dichtomatik 67188388 O-Ring, 3 mm ID x 7 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import, Custom H-2 X 3
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
8-MM-PITCHX62-MM X 1440-MM TIMING BELTS -JAS14408M62 >
OIL SEALS-4.125" X 5.126" X .438"-CHI41170>
Vortec Pro® 40031 Multi-Purpose Chip and Oil Brush, 1/2 in THK China Bristle Brush, Plastic Handle, Alkyd Paints, All Stains, Oil Paints, Shellacs, Urethane and Varnishes
Vortec Pro® 40031 Multi-Purpose Chip and Oil Brush, 1/2 in THK China Bristle Brush, Plastic Handle, Alkyd Paints, All Stains, Oil Paints, Shellacs, Urethane and Varnishes
1.438" X 2.374X.313" OIL SEAL-CHI14282 >
The quality of cutting and grinding wheels depends on several factors - the grain (size, shape and quality) determines how aggressive a wheel is. The right mix of bonding resins, additives and fiberglass reinforcement determines the wheel life. metabo® cutting and grinding wheels are designed and manufactured in accordance with our most stringent specifications so that they, in combination with our power tools, achieve the best performance and productivity, saving time and money.
