BALL BEARINGS
BPFL-6-19 a light-duty, pressed-steel 2-bolt flange ball bearing unit. This assembly features a set-screw locking mechanism and is commonly used in light industrial, agricultural, or conveyor applications where a lightweight, low-profile flanged mount is
• Bore Diameter (Shaft Size): 1-3/16 inches (1.1875 in)
• Housing Type: 2-Bolt Flange (Pressed Steel)
• Locking Mechanism: Set Screw
• Bolt Hole-to-Hole Distance: 3-9/16 inches (90.5 mm)
• Overall Housing Height/Width: 3-19/64 inches (84 mm)
• Bearing Insert Material: Chrome Steel / Roller Bearing Steel
BPFT-6-18 a standard-duty, light-weight 3-bolt flange ball bearing unit engineered for a 1-1/8 inch shaft.
• Shaft Diameter (Bore ID): 1-1/8 inches (1.1250")
• Housing Profile: 3-Bolt Triangular Flange
• Housing Material: High-tensile Pressed Steel (PFT6 frame size)
• Locking Mechanism: Dual Set-Screw Locking Collar
• Bearing Insert Material: High-carbon AISI 52100 Chrome Steel
• Radial Dynamic Load Capacity: 4,410 lbf
• Radial Static Load Capacity: 2,540 lbf
• Stamping Structural Load Limit: 1,100 lbs
• Lubrication Status: Factory pre-greased and sealed for life (Non-Relubricatable)
• Sealing Profile: Standard full-contact rubber lip seals
• Max Temperature Threshold: Up to 212°F (100°C) duty rating
BPFT-6-19 a standard-duty, light-weight 3-bolt flange ball bearing unit engineered for a 1-3/16 inch shaft.
• Shaft Diameter (Bore ID): 1-3/16 inches (1.1875")
• Housing Type: 3-Bolt Round / Triangular Flange
• Housing Material: High-tensile Pressed Steel (PFT6 frame)
• Locking Mechanism: Dual Set-Screw Locking Collar
• Bearing Insert Material: High-carbon AISI 52100 Chrome Steel (B6-19 insert)
• Radial Dynamic Load Capacity: 4,410 lbf (2,000 kgf)
• Radial Static Load Capacity: 2,535 lbf (1,150 kgf)
• Stamping Load Limit: 1,100 lbs
• Lubrication Status: Factory pre-greased and sealed for life (Non-Relubricatable)
• Sealing Profile: Standard full-contact rubber lip seals
BPFT-7-23 a standard-duty, light-weight 3-bolt flange ball bearing unit engineered for a 1-7/16 inch shaft.
• Shaft Diameter (Bore ID): 1-7/16 inches (1.4375")
• Housing Profile: 3-Bolt Round / Triangular Flange
• Housing Material: High-tensile Pressed Steel
• Locking Mechanism: Dual Set-Screw Collar
• Stamping Load Limit: 1,400 lbs
• Radial Dynamic Load Capacity: ~5,820 lbf (2,640 kgf)
• Radial Static Load Capacity: ~3,460 lbf (1,570 kgf)
• Lubrication Status: Factory pre-greased and sealed (Non-Relubricatable)
• Sealing Profile: Standard full-contact rubber lip seals
BPR-4-12 a light-duty, rubber-cushioned pressed steel pillow block bearing unit. This specialized unit consists of a narrow inner ring bearing insert housed within a compact, two-piece pressed steel housing, wrapped with a rubber cushioning ring to absorb
• Bore Diameter (Shaft Size): 3/4 inch (0.7500 in)
• Note: In imperial bearing nomenclature, the "-12" suffix designates the bore diameter in sixteenths of an inch (12/16" = 3/4").
• Housing Type: Pressed Steel Pillow Block with a Rubber Cushioning Ring
• Locking Mechanism: Set Screw Locking
• Replacement Insert Part Number: B4-12 (Narrow Inner Ring, Cylindrical O.D.)
• Housing Part Number: PP5
• Rubber Ring Part Number: R5
• Stamping Load Limit: 400 lbs
• Dynamic Load Rating: 2,890 lbf
• Static Load Rating: 1,500 lbf
BPR-6-18 a normal-duty, light-weight pillow block ball bearing assembly configured for a 1-1/8 inch shaft.
• Shaft Diameter (Bore ID): 1-1/8 inches (1.1250")
• Housing Base Configuration: 2-Bolt Pillow Block
• Housing Material: High-tensile Pressed Steel with a Rubber Cushion Ring
• Locking Mechanism: Dual 120° Set-Screw Locking Collar
• Bearing Insert Material: High-carbon AISI 52100 Chrome Steel
• Radial Dynamic Load Capacity: 4,410 lbf
• Radial Static Load Capacity: 2,540 lbf
• Lubrication Status: Factory pre-greased and sealed for life (Non-Relubricatable)
• Sealing Profile: Standard full-contact rubber lip seals
• Total Weight: ~1.23 lbs
BPR-6-19 • Shaft Diameter (Bore ID): 1-7/16 inches (1.4375") • Housing Profile: 3-Bolt Round / Triangular Flange • Housing Material: High-tensile Pressed Steel • Locking Mechanism: Dual Set-Screw Collar • Stamping Load Limit: 1,400 lbs • Radial Dynamic Lo
• Shaft Diameter (Bore ID): 1-3/16 inches (1.1875")
• Housing Base Configuration: 2-Bolt Pillow Block
• Housing Material: High-tensile Pressed Steel with Rubber Ring Insert
• Locking Mechanism: Dual Set-Screw Locking Collar
• Bearing Insert Material: High-carbon AISI 52100 Chrome Steel
• Lubrication Status: Factory pre-greased and lubricated for life (Non-Relubricatable)
• Stamping Load Limit: 800 lbs
• Total Weight: 1.35 lbs
BR-9902 Double Shielded Mini Ball Bearing
The Schatz BR9902 (often requested with typos like zbr9902) is a high-precision, single-row deep groove radial ball bearing. Manufactured in the USA by the Schatz Bearing Corporation, it features an inch-based dimension profile and is widely used across aerospace, instrumentation, and small mechanical assemblies.
C-8016 • Bore Diameter (ID): 16 mm (0.6299 in) • Outer Diameter (OD): 35 mm (1.3780 in) • Outer Ring Width: 11 mm (0.4331 in) • Inner Ring Width: 12.192 mm (0.4800 in)
Bore Diameter (Inner): 16 mm (approx. 0.63 inches) Outer Diameter: 35 mm (approx. 1.378 inches) Width: 0.500 inches (1/2 inch) Common Industry Interchanges: You can typically swap or cross-reference this part with an 88016 (double sealed), MRC 488016, or general 8016 entries from manufacturers like NTN or National.
Recently Viewed
Made from low carbon steel and tapered 1/4 in/ft. Pins are mainly used for hole alignment in maintenance machinery. Handy kit for shop toolroom or toolbox. On hand when needed saves time and money. Plastic compartment box is easy to store. The Precision Brand® 100-piece taper pin Assortment contains: (3) #0 x 3/4 in, (3) #0 x 1 in, (5) #0 x 1-1/4 in, (5) #0 x 1-1/2 in, (3) #0 x 1-3/4 in, (3) #1 x 3/4 in, (5) #1 x 1 in, (5) #1 x 1-1/4 in, (5) #1 x 1-1/2 in, (3) #1 x 1-3/4 in, (3) #1 x 2 in, (3) #2 x 3/4 in, (3) #2 x 1 in, (5) #2 x 1-1/4 in, (5) #2 x 1-1/2 in, (3) #2 x 1-3/4 in, (5) #2 x 2 in, (3) #2 x 2-1/4 in, (5) #3 x 1 in, (5) #3 x 1-1/4 in, (5) #3 x 1-1/2 in, (5) #3 x 1-3/4 in, (5) #3 x 2 in, (3) #3 x 2-1/4 in, (3) #3 x 2-1/2 in, (3) #3 x 2-3/4 in, (3) #3 x 3 in, (3) #4 x 1 in, (3) #4 x 1-1/4 in, (3) #4 x 1-1/2 in, (5) #4 x 1-3/4 in, (3) #4 x 2 in, (3) #4 x 2-1/4 in, (3) #4 x 2-3/4 in, (3) #4 x 3 in, (3) #5 x 1-1/2 in, (5) #5 x 1-3/4 in, (3) #5 x 2 in, (3) #5 x 2-1/4 in, (3) #5 x 2-1/2 in, (3) #5 x 2-3/4 in, (3) #5 x 3 in, (3) #6 x 1-1/2 in, (3) #6 x 1-3/4 in, (3) #6 x 2 in, (3) #6 x 2-1/4 in, (3) #6 x 2-3/4 in and (3) #6 x 3 in.
H-PITCH X 82" TIMING BELT - JAS820H100>
7/8" -ID LOW PILLOW BLOCK UNIT-FAFRAK7/8 >
JAS6005M20>
MORSE® 33835 2068 General Purpose Straight Flute Hand Tap, Right Hand Cutting, #8-36 Thread, H2 Thread Limit, Bottoming Chamfer, 4 Flutes, Bright, HSS
NCS-4424 ) is an inch-series, heavy-duty machined needle roller bearing without an inner ring.
• Shaft Diameter (Under Roller / Bore \(F_{w}\)): 2-3/4 inches (2.7500 in / 69.85 mm)
• Note: In imperial needle bearing nomenclature, the first digit "44" denotes the bore size in sixteenths of an inch (44/16" = 2.75").
• Outside Diameter (D): 3-1/2 inches (3.5000 in / 88.90 mm)
• Note: The second digit "56" in standard cross-references indicates the outer diameter in sixteenths of an inch (56/16" = 3.5").
• Overall Width (C or B): 1-1/2 inches (1.5000 in / 38.10 mm)
• Note: The final digit "24" indicates the outer ring width in sixteenths of an inch (24/16" = 1.5").
• Dynamic Load Rating (\(C_{r}\)): 22,300 lbf (99,200 N)
• Static Load Rating (\(C_{0r}\)): 45,000 lbf (200,000 N)
• Limiting Speed (Oil): 6,500 RPM
