NCS-4424 ) is an inch-series, heavy-duty machined needle roller bearing without an inner ring.
• Shaft Diameter (Under Roller / Bore \(F_{w}\)): 2-3/4 inches (2.7500 in / 69.85 mm)
• Note: In imperial needle bearing nomenclature, the first digit "44" denotes the bore size in sixteenths of an inch (44/16" = 2.75").
• Outside Diameter (D): 3-1/2 inches (3.5000 in / 88.90 mm)
• Note: The second digit "56" in standard cross-references indicates the outer diameter in sixteenths of an inch (56/16" = 3.5").
• Overall Width (C or B): 1-1/2 inches (1.5000 in / 38.10 mm)
• Note: The final digit "24" indicates the outer ring width in sixteenths of an inch (24/16" = 1.5").
• Dynamic Load Rating (\(C_{r}\)): 22,300 lbf (99,200 N)
• Static Load Rating (\(C_{0r}\)): 45,000 lbf (200,000 N)
• Limiting Speed (Oil): 6,500 RPM
Recently Viewed
NCS-4424 ) is an inch-series, heavy-duty machined needle roller bearing without an inner ring.
• Shaft Diameter (Under Roller / Bore \(F_{w}\)): 2-3/4 inches (2.7500 in / 69.85 mm)
• Note: In imperial needle bearing nomenclature, the first digit "44" denotes the bore size in sixteenths of an inch (44/16" = 2.75").
• Outside Diameter (D): 3-1/2 inches (3.5000 in / 88.90 mm)
• Note: The second digit "56" in standard cross-references indicates the outer diameter in sixteenths of an inch (56/16" = 3.5").
• Overall Width (C or B): 1-1/2 inches (1.5000 in / 38.10 mm)
• Note: The final digit "24" indicates the outer ring width in sixteenths of an inch (24/16" = 1.5").
• Dynamic Load Rating (\(C_{r}\)): 22,300 lbf (99,200 N)
• Static Load Rating (\(C_{0r}\)): 45,000 lbf (200,000 N)
• Limiting Speed (Oil): 6,500 RPM
2-OZ J.B. WELD ADHESIVE CARDED-JBW8265S >
OIL FILTERS-WIX51747>
3 GROOVE 3-V-BELT QUICK DISCONNECT SF-BUSH SHEAVES-IDC3/3V1900SF >
Browning® 1225788 Finished Bore Change Gear Bushing, 1-1/8 in ID x 1-3/8 in OD, 2-1/2 in L, Steel
Browning® 1225788 Finished Bore Change Gear Bushing, 1-1/8 in ID x 1-3/8 in OD, 2-1/2 in L, Steel
1/4" 4-PIECE MALE ROD ENDS-SEAARE4N >
