BALL BEARINGS
BALL BEARINGS-ORS6301ZZNR>
BALL BEARINGS-ORS622042RS>
2-1/2" ID BEARING-LNKP240>
PAPZ-0608-P-10 INA BEARING a maintenance-free, inch-fractional Permaglide plain bushing / sleeve bearing
PERMAGLIDE BEARINGS-INAPAPZ0608P10>
TPR-ID SELF-ALIGNING BALL BEARINGS-FAFPL6615N>
QH-0-L-01 a vintage, high-precision super-light series angular contact ball bearing.
• Bore (Inner Diameter): 12 mm
• Outside Diameter (OD): 28 mm
• Width: 8 mm
• Design Type: Angular Contact, Magneto/Super-light configuration.
DOUBLE OPEN FACE BALL BEARING-GULR10 >
DOUBLE SEALED BALL BEARING-GULR102RS >
DOUBLE SHIELDED BALL BEARING-GULR102Z >
DOUBLE SEALED BALL BEARING
Radial/Deep Groove Ball Bearing - Straight Bore, 0.6250 in ID, 1.3750 in OD, 0.3438 in Width, Double Shielded, Without Snap Ring
DOUBLE SHIELDED BALL BEARING-NTNR10ZZ >
DOUBLE SHIELDED BALL BEARINGS
DOUBLE OPEN FACE BALL BEARING-GULR12 >
DOUBLE SEALED BALL BEARING-GULR122RS >
DOUBLE SHIELDED MINI BALL BEARING-GULR122Z >
DOUBLE SEALED BALL BEARING-NTNR12LL >
DOUBLE SEALED BALL BEARING-NTNR12LLUC3/L627 >
DOUBLE SHIELDED BALL BEARING-NTNR12ZZ >
BALL BEARING--" KYK" BRAND ONLY-GULR12ZZSR12 >
R-14 a single-row, deep groove radial ball bearing engineered specifically for 7/8-inch fractional shafts.
• Bore Diameter (Inner ID): 7/8 inch (0.8750")
• Outside Diameter (Outer OD): 1-7/8 inches (1.8750")
• Overall Width: 1/2 inch (0.5000")
• Radial Static Load Capacity: 1,301 lbf
• Radial Dynamic Load Capacity: 2,266 lbf
• Max Speed Rating: ~16,000 RPM (open or shielded)
• Material Composition: High-grade chrome steel with standard steel cage
DOUBLE OPEN FACE BALL BEARING-IDCR14 >
DOUBLE OPEN FACE BALL BEARING-GULR14 >
DOUBLE SEALED BALL BEARING-GULR142RS >
Recently Viewed
TORQUE LIMITER SPROCKETS-BRW50T45L40 >
Crosby® 1016644 HR-125M Swivel Hoist Ring, 2150 kg at 5:1 Design Factor Load, 180 deg Pivot, 360 deg Swivel, 17.5 mm Bail, M20x2.5 Thread
Crosby® 1016644 HR-125M Swivel Hoist Ring, 2150 kg at 5:1 Design Factor Load, 180 deg Pivot, 360 deg Swivel, 17.5 mm Bail, M20x2.5 Thread
BANDED V-BELT-JAS12RB116>
IKO designs and manufactures thrust bearings with precisely machined cages and rollers to handle high axial loads in confined spaces. Two styles are available - thrust needle roller bearings and thrust roller bearings. Thrust Needle Roller Bearings feature needle type rollers and cages made from precisely formed, surface hardened steel plates.
4" X 60-YDS MASKING TAPE-PMAP7904 >
PI-242816 an inch-series solid inner ring (inner race) designed for heavy-duty needle roller bearings.
• Inside Diameter (Bore): 1-1/2 inches (1.5000 in / 38.10 mm)
• Outside Diameter (Raceway): 1-3/4 inches (1.7500 in / 44.45 mm)
• Overall Width: 1 inch (1.0000 in / 25.40 mm)
• Component Type: Separable Inner Ring Only
• Material: High-Carbon Chrome Bearing Steel (Hardened & Ground)
