BALL BEARINGS
BALL BEARING WITH SNAP RING-GUL7612DLG >
BALL BEARING WITH SNAP RING-GUL7616DLG >
BALL BEARING WITH SNAP RING-GUL7620DLG >
77-R-10 a premium single-row, double-shielded deep groove radial ball bearing designed for 5/8-inch fractional shafts.
• Bore Diameter (Inner): 5/8 inch (0.6250")
• Outside Diameter (Outer): 1-3/8 inches (1.3750")
• Overall Width: 11/32 inch (0.3438")
• Enclosure Type: Double Shielded Metal Closures (ZZ / S7KDD)
• Radial Static Load Capacity: ~654 lbf
• Radial Dynamic Load Capacity: ~1,034 to 1,260 lbf (brand variance)
• Max Speed Rating: ~21,000 to 24,000 RPM (Grease lubricated)
• Row Configuration: Single Row Non-Fill Slot
77-R-14 a premium single-row, double-shielded deep groove radial ball bearing designed for 7/8-inch fractional shafts
• Bore Diameter (Inner): 7/8 inch (0.8750")
• Outside Diameter (Outer): 1-7/8 inches (1.8750")
• Overall Width: 1/2 inch (0.5000")
• Enclosure Type: Double Shielded Metal Closures (ZZ)
• Radial Static Load Capacity: 1,301 lbf
• Radial Dynamic Load Capacity: 2,266 lbf
• Max Speed Rating: ~16,000 to 18,000 RPM (Grease lubricated)
• Row Configuration: Single Row Non-Fill Slot
77-R-16 the exact same premium single-row, double-shielded deep groove radial ball bearing
• Bore Diameter (Inner): 1.0000 inch (1")
• Outside Diameter (Outer): 2.0000 inches (2")
• Overall Width: 0.5000 inch (1/2")
• Enclosure Type: Double Shielded Metal Closures (ZZ / S10KDD)
• Radial Static Load Capacity: 1,338 lbf
• Radial Dynamic Load Capacity: 2,259 lbf
• Max Speed Rating: ~15,000 RPM (Grease lubricated)
• Row Configuration: Single Row Non-Fill Slot
77-R-8 (also cataloged as NDH 77R8) is a vintage single-row deep groove inch-series ball bearing.
R Light Inch Series Ball Bearing
Item #102072506
Single Row Radial Bearing
1/2" ID x 1 1/8" OD x 5/16" Wide
Double Shielded
No Snap Ring
Standard (ABEC 1)
77036 Double Sealed a standard miniature metric single-row radial deep groove ball bearing.
DOUBLE SEALED BALL BEARINGS-GEN77036>
77505 NEW DEPARTURE BEARINGS a vintage, metric single-row deep-groove ball bearing featuring double enclosures.
• Bore Diameter (Inner ID): 25 mm (0.9843 in)
• Outside Diameter (Outer OD): 52 mm (2.0472 in)
• Width (Thickness): 15 mm (0.5906 in)
• Structure: Single-row deep-groove radial ball alignment
• Enclosure: Double-sided shielding or contact lip seals
SPECIAL L/MOWER BALL BEARINGS-GEN850488>
WIDE INNER RACE BALL BEARINGS -GUL87008 >
BALL BEARING-GUL87016 >
BALL BEARINGS -GEN870288 >
WIDE INNER RACE BALL BEARINGS-BCA87503>
WIDE INNER RACE BALL BEARING-GUL87503 >
WIDE INNER RACE BALL BEARING -GUL87505 >
WIDE INNER RACE BALL BEARING-GUL87507 >
WIDE INNER RACE BALL BEARING-GUL88107 >
88504 single-row, deep-groove radial ball bearing that features an extended inner ring and double felt seals.
• Bore Diameter (Inner ID): 20 mm
• Outside Diameter (Outer OD): 47 mm
• Inner Ring Width: 17.75 mm (0.6988 in)
• Outer Ring Width: 14.00 mm (0.5512 in)
• Enclosure: Double sealed (historically felt, modernly rubber)
WIDE INNER RACE BALL BEARING - NTN88505 >
WIDE INNER RACE BALL BEARING-NTN88506 >
WIDE INNER RACE BALL BEARINGS-BCA88506BR>
WIDE INNER RACE BALL BEARING-NTN88507 >
Recently Viewed
SOLARA-GRAY LENS WITH GRAY FRAMES-PSPSTG4320D >
CSWS-1/0-516 1/0-awg X 5/16" Bolt Hole Cable
1/0-AWG X 5/16" BOLT HOLE CABLE LUG - ILSCSWS1/0516>
Arlington Snap2IT® 38AST Straight Cable Connector With Insulated Throat, 3/8 in Trade, 1/2 in Knockout, 0.45 to 0.612 in Cable Openings, Die Cast Zinc
Arlington Snap2IT® connectors are designed for safe and fast installations of flex, MC, AC and HCF cable and cover the widest cable ranges in the industry. They save time too-about 17 s per fitting. Just snap the fitting onto the cable, then into the electrical box. No tools are required for the installation.
JASON B118 CLASSICAL UNIMATCH MULTI-PLUS V-BELT-B, 21/32 IN TOP WIDTH, 1 STRAND 121 IN. NOMINAL OUTSIDE LENGTH, SMOOTH
V-BELT, B SERIES' 121" BELT OUTSIDE LENGTH; 5/8" BELT WIDTH; 1 BAND; POLYESTER TENSILE MATERIAL; RUBBER AND FABRIC OUTER MATERIAL
JASB118 >
S-3016 inch-series drawn cup needle roller bearing utilizing a full complement design. Unlike caged variants, a full complement bearing featu
• Under-Roller Bore Diameter (\(F_{w}\)): 1.875 inches (47.625 mm)
• Outside Diameter (D): 2.250 inches (57.150 mm)
• Width (C): 1.000 inch (25.400 mm)
• Basic Dynamic Load Rating (\(C_{r}\)): 60.0 kN (13,500 lbf)
• Basic Static Load Rating (\(C_{0r}\)): 126.0 kN (28,500 lbf)
• Maximum Speed (Grease): 2,340 RPM
• Outer Cup Material: Hardened carbon steel alloy
• Roller Material: 52100 Chrome steel
1.654" X 2.165" X .315" OIL SEAL-CHI16512 >
