Precision 100-PC TAPER PIN ASSORTMENTS/KITS PRC 12907
Made from low carbon steel and tapered 1/4 in/ft. Pins are mainly used for hole alignment in maintenance machinery. Handy kit for shop toolroom or toolbox. On hand when needed saves time and money. Plastic compartment box is easy to store. The Precision Brand® 100-piece taper pin Assortment contains: (3) #0 x 3/4 in, (3) #0 x 1 in, (5) #0 x 1-1/4 in, (5) #0 x 1-1/2 in, (3) #0 x 1-3/4 in, (3) #1 x 3/4 in, (5) #1 x 1 in, (5) #1 x 1-1/4 in, (5) #1 x 1-1/2 in, (3) #1 x 1-3/4 in, (3) #1 x 2 in, (3) #2 x 3/4 in, (3) #2 x 1 in, (5) #2 x 1-1/4 in, (5) #2 x 1-1/2 in, (3) #2 x 1-3/4 in, (5) #2 x 2 in, (3) #2 x 2-1/4 in, (5) #3 x 1 in, (5) #3 x 1-1/4 in, (5) #3 x 1-1/2 in, (5) #3 x 1-3/4 in, (5) #3 x 2 in, (3) #3 x 2-1/4 in, (3) #3 x 2-1/2 in, (3) #3 x 2-3/4 in, (3) #3 x 3 in, (3) #4 x 1 in, (3) #4 x 1-1/4 in, (3) #4 x 1-1/2 in, (5) #4 x 1-3/4 in, (3) #4 x 2 in, (3) #4 x 2-1/4 in, (3) #4 x 2-3/4 in, (3) #4 x 3 in, (3) #5 x 1-1/2 in, (5) #5 x 1-3/4 in, (3) #5 x 2 in, (3) #5 x 2-1/4 in, (3) #5 x 2-1/2 in, (3) #5 x 2-3/4 in, (3) #5 x 3 in, (3) #6 x 1-1/2 in, (3) #6 x 1-3/4 in, (3) #6 x 2 in, (3) #6 x 2-1/4 in, (3) #6 x 2-3/4 in and (3) #6 x 3 in.
-
BrandPrecision Brand®
-
UPC698158129072
-
Manufacturer Part Number12907
-
CountryUSA|Canada
-
MaterialLow Carbon Steel
-
Measurement SystemImperial
-
Number of Pieces100
- Made from low carbon steel and tapered 1/4 in per foot
- Pins are mainly used for hole alignment in maintenance machinery
- Handy kit for shop toolroom or toolbox
- On hand when needed saves time and money
- Plastic compartment box is easy to store
| Competitor Name | Cross-Reference Number |
|---|---|
| MSC | 84408368 |
| Fastenal | 7041071 |
-
UNSPSC31163200
-
Package Description100/AST
Recently Viewed
Made from low carbon steel and tapered 1/4 in/ft. Pins are mainly used for hole alignment in maintenance machinery. Handy kit for shop toolroom or toolbox. On hand when needed saves time and money. Plastic compartment box is easy to store. The Precision Brand® 100-piece taper pin Assortment contains: (3) #0 x 3/4 in, (3) #0 x 1 in, (5) #0 x 1-1/4 in, (5) #0 x 1-1/2 in, (3) #0 x 1-3/4 in, (3) #1 x 3/4 in, (5) #1 x 1 in, (5) #1 x 1-1/4 in, (5) #1 x 1-1/2 in, (3) #1 x 1-3/4 in, (3) #1 x 2 in, (3) #2 x 3/4 in, (3) #2 x 1 in, (5) #2 x 1-1/4 in, (5) #2 x 1-1/2 in, (3) #2 x 1-3/4 in, (5) #2 x 2 in, (3) #2 x 2-1/4 in, (5) #3 x 1 in, (5) #3 x 1-1/4 in, (5) #3 x 1-1/2 in, (5) #3 x 1-3/4 in, (5) #3 x 2 in, (3) #3 x 2-1/4 in, (3) #3 x 2-1/2 in, (3) #3 x 2-3/4 in, (3) #3 x 3 in, (3) #4 x 1 in, (3) #4 x 1-1/4 in, (3) #4 x 1-1/2 in, (5) #4 x 1-3/4 in, (3) #4 x 2 in, (3) #4 x 2-1/4 in, (3) #4 x 2-3/4 in, (3) #4 x 3 in, (3) #5 x 1-1/2 in, (5) #5 x 1-3/4 in, (3) #5 x 2 in, (3) #5 x 2-1/4 in, (3) #5 x 2-1/2 in, (3) #5 x 2-3/4 in, (3) #5 x 3 in, (3) #6 x 1-1/2 in, (3) #6 x 1-3/4 in, (3) #6 x 2 in, (3) #6 x 2-1/4 in, (3) #6 x 2-3/4 in and (3) #6 x 3 in.
H-PITCH X 82" TIMING BELT - JAS820H100>
7/8" -ID LOW PILLOW BLOCK UNIT-FAFRAK7/8 >
JAS6005M20>
MORSE® 33835 2068 General Purpose Straight Flute Hand Tap, Right Hand Cutting, #8-36 Thread, H2 Thread Limit, Bottoming Chamfer, 4 Flutes, Bright, HSS
NCS-4424 ) is an inch-series, heavy-duty machined needle roller bearing without an inner ring.
• Shaft Diameter (Under Roller / Bore \(F_{w}\)): 2-3/4 inches (2.7500 in / 69.85 mm)
• Note: In imperial needle bearing nomenclature, the first digit "44" denotes the bore size in sixteenths of an inch (44/16" = 2.75").
• Outside Diameter (D): 3-1/2 inches (3.5000 in / 88.90 mm)
• Note: The second digit "56" in standard cross-references indicates the outer diameter in sixteenths of an inch (56/16" = 3.5").
• Overall Width (C or B): 1-1/2 inches (1.5000 in / 38.10 mm)
• Note: The final digit "24" indicates the outer ring width in sixteenths of an inch (24/16" = 1.5").
• Dynamic Load Rating (\(C_{r}\)): 22,300 lbf (99,200 N)
• Static Load Rating (\(C_{0r}\)): 45,000 lbf (200,000 N)
• Limiting Speed (Oil): 6,500 RPM
