BALL BEARINGS

THRUST BALL BEARING-NTN51205 >

3-PC THRUST BALL BEARINGS-SKF51204>

THRUST BALL BEARING -GUL51201 >

THRUST BALL BEARING -NTN51201 >

170-MM-ID THRUST BALL BEARINGS-NTN51134>

THRUST BALL BEARING-NTN51110 >

• Bore Diameter (Inner Shaft Washer d): 45 mm (1.7717 in)
• Outside Diameter (Housing Washer D): 65 mm (2.5591 in)
• Overall Height/Width (T): 14 mm (0.5512 in)
• Component Composition: Separable 3-piece kit consisting of:
• 1x Shaft Washer: (Tight bore tolerance to grip the rotating shaft)
• 1x Housing Washer: (Slightly larger clearance bore to sit loosely/stationary in the housing)
• 1x Pressed Steel Ball & Cage Assembly
• Basic Dynamic Load Rating (\(C_{a}\)): ~27,900 N to 34,800 N
• Basic Static Load Rating (\(C_{0a}\)): ~69,100 N
• Limiting Speed (Grease): 3,200 RPM
• Limiting Speed (Oil): 5,000 RPM

40-Mm-ID THRUST BALL BEARINGS

THRUST BALL BEARING-GUL51108 >

THRUST BALL BEARING-NTN51107 >

THRUST BALL BEARING-GUL51107 >

THRUST BALL BEARING-GUL51106 >

THRUST BALL BEARING-NTN51105 >

THRUST BALL BEARING-NTN51104 >

THRUST BALL BEARING-GUL51103 >

THRUST BEARINGS-FAG51101>

5/8" BALL BEARING STEEL BALLS-SSB58 >

5/32" STEEL BALLS-SSB532 >

5/16" STEEL BALLS-SSB516 >

In industrial manufacturing and mechanical engineering, MRC 5B is a specific model of a precision thrust ball bearing manufactured by the MRC Bearing Company (a brand under SKF). These are standard-grade components used in rotating machinery to handle axial loads.

DOUBLE SEALED AG BALL BEARING WITH SNAP RING-GUL499502H >

WIDE INNER RACE BALL BEARING WITH SNAP RING-GUL488509 >

Outer Diameter (OD): 100 mm (3.937 inches) Inner Diameter (Bore): 55 mm (or variations in inches depending on the exact sub-model) Width: 55.6 mm (2.189 inches) Locking Style: Features dual set screws on an extended inner ring for secure shaft mounting. Sealing: Equipped with high-performance standard seals (2F) to block out dust, grime, and oil.

Spherical OD Insert Bearing-SKF479209D>